Download UDC-3G-XMUX4+ User manual

UDC-3G-XMUX4+
Rev. D
0: 1.2Vnom
1: 2.5Vnom
2: 1.2Vnom
3: 5.0Vnom
optn
0-6
-
rcl
0
-
scale
0-11
-
scale
12-23 out zoom <Hzoom>
<Vzoom>
out pos <Hpos> <Vpos>
optn N act | inact
Purchased features
Each optn block will tell if a
particular feature is enabled. This
is really a less compact way of
showing the same as in mtx 8,
except that the mechanism to
have mtx show up in the GUI
already was in place.
optn 0: SD input
optn 1: HD input
optn 2: 3G input
optn 3: AES I/O
optn 4: SD output
optn 5: HD output
optn 6: 3G output
rcl 0
lock | lol
Reclocker
No control, only used to report
lock status.
-
out zoom <Hscale>
<Vscale> pos
<Hpos> <Vpos> afd
<AFD-code>
Fixed scaler blocks.
12 fixed scale settings. The user
can’t change anything, but can
use the settings for his own
reference.
scale 12 out
zoom 1.33 1.33
scale 12 out pos
0.002 0.002
out zoom <Hscale>
<Vscale> pos
<Hpos> <Vpos> env
( 16/9 | 4/3 ) afd
<AFD-code>
User scale blocks.
12 user scale settings.
Zoom:
Zoom range is from 0.5 to 1.5.
Position:
Position when zoom is < 0
defines where in the output frame
the box is placed. The box will
never move outside of the frame.
out env (16/9 | 4/3)
out afd <AFD-code>
scale 12 out env
16/9
scale 12 out env
4/3
scale 12 out afd
8
scale 12 out afd
11
When zoom is > 0 the position
defines which part of the input
picture to use.
A value of 0 is center. Positive
values moves picture to the right
or up. Negative values moves
picture to the left or down.
AFD code:
The AFD code that is inserted is
5 bits. The user can specify the 4
least significant bits here, while
the 5th bit is taken from the
‘output environment’ setting in
scale 24.
scale
24-31 out
Scale 24 out
<lines>’/’<framerate>(’i’/’p’) 1080/25i
out fill ( full | crop | 14/9 )
scale 24 out fill
full
rule <rule-value>
rule 0x02
ins <insert-value>
insert 0x20
scale 24 rule 0x1 use
0xF ins 0x20 use
0x3E fill full out
1080/25i
Master scale control block
This block sets the output video
standard and the rules that will be
used to determine the scaling
used. In addition it also controls
what packages will be inserted on
the output to describe the video to
down-stream equipment.
There are 8 different versions of
this block, and at one time only
one will be shown and be able to
receive commands. The reason
nevion.com | 50