Download Le Croy SierraFC M164 User Manual

LeCroy Corporation
Connecting the SierraFC M164 to a Host System Over Ethernet
3. To change back to DHCP, in the IP setup dialog, click the DHCP radio button, then click Update.
Figure 3.77: Dynamic IP Setup Success Message
After you see the Warning Message, click Yes
After you see the Success Message, click OK.
Note: You can also click Reset.
Ethernet Connectivity Through a Different Subnet
If you have multiple subnets and would like to connect the Analyzer over a subnet where the DHCP server is on a subnet different from the host computer or the analyzer or if the Host PC and the SierraFC M164 System do not reside on the same subnet, they will not see each other automatically. The SierraFC M164 IP address must be added manually. Perform the following steps:
1. Launch the application and click the Ethernet radio button.
2. Click OK.
3. Click on Add Device in the Select Device dialog.
232 SierraFC M164 Protocol Analyzer User Manual