Download ebdspir-dd-lv - CP Electronics

Technical data
Dimensions
Weight
Supply Voltage
Maximum Load
Power consumption
See diagrams opposite
0.15kg
Min 11.5VDC max 36VDC, min
10VAC max 26.5VAC
Channel 1 (switching):
EBDSPIR-DD-LV
Low voltage supply with relay
output rating 16A resistive 10A
inductive
EBDSPIR-DD-LV-GOLD
Low voltage with relay contact for
low on resistance suitable for
control wire applications 3A
resistive load. Not suitable for
inductive loads
EBDSPIR-DD-LV-OC
Low voltage supply with open
collector output, rating 50mA,
30VDC max
EBDSPIR-DD-LV
DBB
Channel 2 (dimming):
Maximum number of DSI or DALI
ballasts is 10 unless the relay is
disabled then it is 20.
On 627mW, Off 257mW
Dimming output
Basic insulation only. Although low
voltage, this is not an SELV output
and should be treated as if mains
potential. Use mains rated wiring.
Terminal Capacity
Temperature
Humidity
Material (casing)
Type
IP rating
Compliance
2.5mm2
-10ºC to 35ºC
5 to 95% non-condensing
Flame retardant ABS and PC/ABS
Class 2
IP40
EMC-2004/108/EC
LVD-2006/95/EC
Part numbers
Detector
Accessories
Part number
EBDSPIR-DD-LV
EBDSPIR-DD-LV-GOLD
EBDSPIR-DD-LV-OC
DBB
UHS5
UNLCDHS
Description
Ceiling PIR presence/absence detector 12-24V AC/DC
Ceiling PIR presence/absence detector 12-24V AC/DC for low current
Ceiling PIR presence/absence detector 12-24V AC/DC + open collector output
Surface mounting box
Programming IR handset
Universal LCD IR handset
IMPORTANT NOTICE!
This device should be installed by a qualified electrician in
accordance with the latest edition of the IEE Wiring
Regulations and any applicable Building Regulations.
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice.
12
C.P. Electronics Ltd
Brent Crescent
London
NW10 7XR
United Kingdom
Tel:
+ 44 (0) 333 900 0671
Fax:
+ 44 (0) 333 900 0674
www.cpelectronics.co.uk
[email protected]
Ref: #WD488
Issue 3