Download ebdspir-dd-lv - CP Electronics

Two channel, individual switches
Functions: Switches both channels with occupancy. Maintains illuminance, dims and switches the dimming channel
using optional single position retractive switch (switch 2). Switches the switching channel using the optional single
position retractive switch (switch 1).
Configured to presence detection: Turns on automatically with occupancy. Maintains illuminance (dimming channel
only). Press and release switch to toggle output. Press and hold switch to dim up and down (reverses direction with
each press). Turns off after occupancy.
Configured to absence detection: Press and release switch to turn on. Maintains illuminance (dimming channel only).
Press and release switch to turn off. Press and hold switch to dim up and down (reverses direction with each press).
Turns
off after
occupancy.individual switches
6.2 Two
Channel,
Channel
mode:
Set2toMOMENTARY
“Switch andPUSH
dim separate”
OPTION 3(A):
USING
TO MAKE SWITCHES TO PROVIDE SWITCHED OUTPUT TO A
NON-DIMMING
AND SWITCHED
/ DIMMING OUTPUT TO A DIMMING LUMINAIRE OVER 2 CHANNELS
Switch
mode:LUMINAIRE
Set to “1 position
switch separate”
INPUT & SWITCH
CONNECTIONS
DIMMING
BALLAST
DIMMING LUMINAIRE
(DSI or DALI)
DC Supply
AC Supply
OR 10VAC - 26.5VAC
11.5VDC - 36VDC
+
COM
OUT
+
DIMDIM+
SWITCH 1 - MOMENTARY
PUSH TO MAKE SWITCH
SW1/UP
SW2
DOWN
Optional for presence,
mandatory for absence detection
SWITCH 2 - MOMENTARY
PUSH TO MAKE SWITCH
Optional for presence,
mandatory for absence detection
EBDSPIR-DD-LV SENSOR
LOAD CONNECTIONS
-DD-LV
-DD-LV/GOLD
LOAD CONNECTIONS
-DD-LV/OC
Two channel, common switch
LOAD
INTERNAL OPEN
COLLECTOR
TRANSISTOR
INTERNAL
Functions: Switches both channelsRELAY
with occupancy. Maintains
illuminance, dims and switches the dimming channel
LOAD
using optional centreCOM
biased retractive switch .
COM
OUT detection: Turns on automatically with occupancy.
OUT
Configured to presence
Maintains illuminance (dimming channel
+ down switch to turn off. Press and release up+switch to turn back on. Press and hold up switch
only). Press and release
to dim up, press and hold down switch to dim down. Turns off after occupancy. Channel 1 does not operate with switch.
Configured to absence detection: Press and release up switch to turn on. Maintains illuminance (dimming channel
only). Press and release down switch to turn off. Press and hold up switch to dim up, press and hold down switch to dim
down. Turns off after occupancy. Channel 1 does not operate with switch.
Channel mode: Set to “Switch and dim separate”
6.1 Single channel dimming
Switch mode: Set to “2 position switch separate”
OPTION
USING A CENTRE
BIASED
RETRACTIVE SWITCH TO PROVIDE
6.3
Two2:Channel,
common
switch
SWITCHED
AND DIMMING
(STANDARDSWITCH
CONFIGURATION)
OPTION
3(B): USING
A CENTREOUTPUT
BIASED RETRACTIVE
TO PROVIDE SWITCHED OUTPUT TO A
NON-DIMMING LUMINAIRE AND SWITCHED / DIMMING OUTPUT TO A DIMMING LUMINAIRE OVER 2 CHANNELS
DIMMING
BALLAST
INPUT & SWITCH
CONNECTIONS
DIMMING LUMINAIRE
DIMMING
(DSI or DALI)
BALLAST
DC Supply
AC Supply
OR 10VAC - 26.5VAC
11.5VDC - 36VDC
+ DC Supply
11.5VDC - 36VDC
+
AC Supply
OR 10VAC - 26.5VAC
COM
OUT
+
COM
OUT
+
DIMDIM+
DIM- SW1/UP
DIM+SW2
DOWN
SW1/UP
SW2
DOWN
EBDSPIR-DD-LV SENSOR
EBDSPIR-DD-LV SENSOR
6
DIMMING LUMINAIRE
(DSI or DALI)
CENTRE BIASED
RETRACTIVE SWITCH
Optional for presence,
CENTRE BIASED
mandatory for absence detection
RETRACTIVE SWITCH
Optional for presence,
mandatory for absence detection