Download Quick Installation Guide(For Android phone)

Quick Installation Guide(For Android phone)
1: System Requirement: Android 2.3 or above.
2: e-View App Installation.
Insert the CD into your CD driver of your computer. Open the CD file,
Find out the Android application : ”e-View”, copy it to your mobile
Phone and install it,like following:
3: How to Use the App e-View.



Firstly, enable the WI-FI function of your mobile phone. (Note:Your phone and the camera must be in the
same LAN.)
Secondly, run the application.
After running the application, click
to add cameras。

Add the camera to e-View . (There are three ways to add camera into it.)
Method 1 : Input the Did,User, Pwd of your camera manually. Then click “Done” button.
Method 2 : Click “Search” button then you will get the camera list, the cameras in the same LAN with
your phone. Choose the camera which you want to watch.
Method 3 : Scan the QRCode: Click the “Scan ID” button, at the button of the camera, there is a label
with QRCode, then use your phone to scan the bar code, it will show the ID, then
press ”done”.
To find the camera’s P2P ID number, JWEV-XXXXXX-XXXXX

Finishing adding the camera, begin to view the real-time video. You will see following pictures:

Live video and operation interface.
⑨:Record.
①:Exit
⑩:Pattern.
②:Preset position
③:Mirror
⑪:Resolution
④:Upside down
⑫:Frame rate.
⑤:Auto pan&tilt.
⑬:Brightness
⑥:Full screen
⑭:Contrast.
⑦:Listen and speak
⑮:Default all.
⑧:Photo
⑯:IR control for night vision.
Note: Sliding the screen can make the camera pan and tilt.

Other
①:See 4 cameras at the same time.
②:Camera settings
③:Alarm log.
④:The pictures taken by the camera.
⑤:The videos recorded by the camera,the video files in the
SD card can also be watched.
⑥:About the vision of this excellent application.You can use
this application to see your camera in LAN and from
Internet.
End.
Hope you like this application.If you have any problems,let us know,
your kindly suggestions will be appreciated.Thanks very much.