Download Millipore Advantage A

Alert and Alarm messages
6-3.6
CANCELLING AN ALARM STOP MESSAGE
The display of an Alarm Stop message (i.e. Q-GARD PACK OUT) can only be cancelled by fixing the cause of
the Alarm. It is not possible to cancel the display of an Alarm Stop message with the Keypad for 1
hour. For example, the display of the Alarm Stop message Q-GARD PACK OUT can not be cancelled for 1 hour
by using the Keypad. The Q-Gard Pack would need to be put back in place in order to eliminate this Alarm
message.
6-3.7
CANCELLING AN ALARM MESSAGE (MESSAGES THAT DO NOT STOP THE MILLI-Q SYSTEM)
The display of an Alarm message can be cancelled by:
1. Fixing the cause of the Alarm or
2. Using the Keypad CONFIRM Button (see below). This cancels the display of the Alarm message for 1
hour. Note that you can not cancel the display of an Alarm that automatically stops the Milli-Q System.
In this example, the Alarm message is MILLI-Q T > MAX.
ê
Press
The display of the Alarm is
cancelled for 1 hour. It
appears again after 1
hour unless the cause of
the Alarm message is
fixed.
Go to STANDBY Mode
and then back to READY
Mode. If this is not done,
then the Milli-Q System
does not dispense water
with a cancelled Alarm
message.
ê
Now suppose a Millipore Service Representative fixes the Alarm. Go to STANDBY Mode and then back to
READY Mode. If this is not done, then the Milli-Q System does not dispense water with a cancelled Alarm
message
ê
81