Download VIPA System SLIO
Transcript
Chapter 1 Safety Manual VIPA System SLIO Functional safety - safety relevant parameters General This chapter describes characteristics associated to functional safety. In according to IEC 61508 safety means that the residual error probability of the whole system below the standard limits. In accordance to the whole system internal safety-relevant device errors must be detected and be led to a safe condition. Safety relevant parameters The values here refer to the modules of this manual. Safety relevant characteristics may always be found in the according manuals of the modules. Characteristics SDI 4xDC 24V Characteristics according to IEC 61508 PFH = 0.25 * 10-9/h PFDavg = 2.14 * 10-5 SFF according SIL 3 Probability of failure per Hour: Probability of danger failure per hour. Probability of Failure on Demand average: Average of probability of failure on demand. Safe Failure Fraction: Fraction of failure, which lead to a safe state. Characteristics according to DIN EN ISO 13849-1 Meaning MTTFd: high Mean Time To dangerous Failure DCavg: high Diagnostic Coverage average During the expected life of the device of up to 20 years, no proof test is required. After this interval, the system SLIO safety module must be decommissioned and sent back to the vendor. Device life: 20 Years 1-12 Meaning HB300E - SM-S - Rev. 14/10