Download installation manual - Bosch Security Systems

Transcript
Installation manual
Operating unit BE 500
Cable entries
Data cable
Mains cable
Introduce the cable into the back
of the BE 500 and fix the casing
to the upper screw.
Line up the casing and screw in
the two lower screws.
Recommended screws:
5 x 50 half--round
Pull the operating panel forwards
and push into the parking
position.
Tighten the upper screw.
Continued
overleaf
page 5
BDL--4998100589
A1.en / 06.12.2000
ST--FIR/ PRM1/ deh