Download Medialon Control System User Manual

• Current Editor TimeZone Settings: Showmaster uses the same Time
Zone as the Showmaster Editor V2 host.
• Manual Settings: Select the Time Zone from the list below.
Click Update to save your changes.
Configuration > Passwords
Connection between Medialon Showmaster and Showmaster Editor can be
protected by a password.
Password configuration is saved in Medialon Showmaster. This configuration
page is used to change the passwords.
Connection Password
This password is optional. If you define a connection password, it will be required
each time Showmaster Editor V2 wants to open a connection with your
Showmaster.
To change the Connection Password:
1. Enter the current “Connection” password. An empty password is set by
default.
2. Type the new password.
3. Confirm this new password.
4. Click “Update” to save your changes.
Firmware Update Password
This password is required each time you want to update your Showmaster’s
firmware. See more about “Update Showmaster V2 Firmware” on page 417.
To change the Firmware Update Password:
330
SHOWMASTER EDITOR SPECIFIC FEATURES