Download Thyritop 40

Any unauthorized reconstruction and modification of Thyritop 40, use of spare and exchange parts not approved by
Pyrocontrole as well as any other use of Thyritop 40 is not allowed. The person responsible for the system must
ensure that
 hints on safety and operating instructions are available and observed,
 operation conditions and specifications are observed,
 protective installations are used,
 required maintenance work is performed,
 maintenance personnel are immediately notified or Thyritop 40 is immediately put out of commission if
abnormal voltages or noises, higher temperatures, vibrations or similar occur to determine the causes.
These operating instructions contain all information required by specialists for use of Thyritop 40. Additional
information and hints for unqualified persons and for use of Thyritop 40 outside of industrial installations are not
contained in these operating instructions.
The warranty obligation of the manufacturer applies only if these operating instructions are observed.
LIABILITY
In case of use of Thyritop 40 for applications not provided for by the manufacturer, no liability is assumed. The
responsibility for required measures to avoid hazards to persons and property is borne by the operator respectively
the user. In case of complaints, please immediately notify us stating:
 type name,
 production number,
 objection,
 duration of use,
 ambient conditions,
 operating mode.
GUIDELINES
The devices of the type range Thyritop 40 conform to the currently applicable EN 50178 and EN 60146-1-1.
The CE mark on the device confirms observation of the general EG guidelines for 2006/95/EC
(LVD) – low voltage and for 2004/108/EC (EMC) – electromagnet compatibility, if the instructions on installation
and commissioning described in the operating instructions are observed.
Regulations and definitions for qualified personnel are contained in DIN 57105/VDE 0105 Part 1.
Safe isolation to VDE 0160 (EN 50178 Chapter 3)
9