1
Download DeepC User Manual
Transcript
DeepC 2-22 SESAM 01-DEC-2010 Program version 4.5 The "Beam presentation" section is used to specify how you want to visualize your lines (risers, mooring lines etc). Wireframe type visualization is typically used to speed up visualization of large models. "Color code settings" are used to specify colors and settings for the "Color Code Property" action Section 2.13. Most of the settings on the last tab "Annotation/Diagrams" are not relevant for DeepC. 2.15 Units All data can be input with a unit specification: Database units (the units in which the data are stored) can either be changed from the default setting when a new project is established, or changed by the FIRST script command. The database units cannot be changed later on. One should note that due to some restrictions on units in Riflex and Simo, database units should always be specified to length unit m, and force unit N or kN in DeepC! Default input units (the units that are assumed when no explicit unit is specified by the user in the input) can be set at any time. The relevant dialog is accessed through the “Edit” menu:
