Download - Aplisens SA
Transcript
User manual for data recorder PMS-90R and cooperating software Fig. 3.15. Devices adding and removing (advanced options active) Downloading of registered data Downloading of data stored on internal memory can be done in two ways: • • using USB FlashDisk (PenDrive) using RS-485 interface Data downloading from Flash drive and selected localisation The USB FlashDisk will be automatically detected if inserted to PC USB port, and the user will be asked for confirmation of data download (if any data available on the inserted disk). Loggy Soft allows to download data from any localisation (selected directory) by means of [Download data (file)] button. This method should be used only if the logged data was previously copied manually from FlashDrive to PC hard drive. Data downloading via RS-485 interface Default settings of data downloading via RS-485 allow to import only newest data, stored since last downloading. This method prevents user against multiply downloading of stored data, and reduces time of data downloading. Date of last download is automatically stored to internal memory of logger while downloading initialised by pressing of [Download data (RS485)] button. In some cases there is a need to download already downloaded data again (failure of the device, errors in database, lost of downloaded data). In such situations it is possible to download data more than one time, but only if data is not overwritten or damaged. 89