Download - Aplisens SA

Transcript
User manual for data recorder PMS-90R and cooperating software
Fig. 3.15. Devices adding and removing (advanced options active)
Downloading of registered data
Downloading of data stored on internal memory can be done in two ways:
•
•
using USB FlashDisk (PenDrive)
using RS-485 interface
Data downloading from Flash drive and selected localisation
The USB FlashDisk will be automatically detected if inserted to PC USB port, and the
user will be asked for confirmation of data download (if any data available on the inserted
disk).
Loggy Soft allows to download data from any localisation (selected directory) by means
of [Download data (file)] button. This method should be used only if the logged data
was previously copied manually from FlashDrive to PC hard drive.
Data downloading via RS-485 interface
Default settings of data downloading via RS-485 allow to import only newest data, stored
since last downloading. This method prevents user against multiply downloading of
stored data, and reduces time of data downloading. Date of last download is
automatically stored to internal memory of logger while downloading initialised by
pressing of [Download data (RS485)] button.
In some cases there is a need to download already downloaded data again (failure of the
device, errors in database, lost of downloaded data). In such situations it is possible to
download data more than one time, but only if data is not overwritten or damaged.
89