Download "user manual"

Transcript
Operating Modes and Mode Changes
Priority of the
Operating Modes
If more than one mode change is requested at the same time, the CPU
changes to the mode with the highest priority. If, for example, the mode
selector is set to RUN and you attempt to set the CPU to STOP at the
programming device, the CPU will change to STOP because this mode has
the highest priority.
Priority
Highest
Mode
STOP
HOLD
START UP
Lowest
9-4
RUN
System Software for S7-300 and S7-400 Program Design
C79000-G7076-C506-01