Download DINPAD - Videx

DINPAD
Adding a User Code
Relay/Output Time
Enter Master Code
(Factory Default = 000)
Followed by B
Enter Master Code
(Factory Default = 000)
Followed by B
Yellow LED on
Yellow LED on
Press 0
Enter <output number> (1 or 2)
Enter <user number> (01-99)
(Up to 99 codes may be added)
Enter <output time> (01-99)
(Enter 00 if latch mode required)
Enter <new user code> (1-8 digits)
Press A
Press A
More Yes
outputs?
Press 3 + <user number>
No
Yellow LED off
Enter <output number> to be triggered
[1 = Relay] [2 = Transistor] [12 = both]
Press B to exit programming
Press A
More
codes?
Yes
Delete a User Code
No
Yellow LED off
Press B to exit programming
Enter Master Code
(Factory Default = 000)
Followed by B
Yellow LED on
Press 9
Delete All Codes
Enter <user number> (01-99)
to delete
Enter Master Code
(Factory Default = 000)
Followed by B
Press A
Yellow LED on
Press 8
More
codes?
Press 99
Yes
No
Yellow LED off
Press B to exit programming
Press A
Yellow LED off
Press B to exit programming
4
DINPAD