Download Manual - Gefen

Appendix
Firmware Upgrade Procedure
Using Gefen Syner-G
The following items are required to update firmware:
•
Gefen Syner-G Software Suite
•
HDMI Detective Plus
•
USB-to-Mini USB cable
•
Firmware file
1.
Download and install the Gefen Syner-G software. Refer to the Syner-G User Manual
for installation instructions.
2.
Launch the Gefen Syner-G Software Suite.
3.
Connect a USB-to-Mini-B cable between the HDMI Detective Plus and the computer
running Gefen Syner-G.
4.
Click the Refresh List button.
5.
Select HDMI Detective Plus from the Select Product drop-down list, at the top
of the screen.
If the HDMI Detective Plus is not listed in the Select product drop-down list, click the
Refresh list button and wait a few moments, then try again.
page | 41