Download 600A01-manual-V1[1]

Chapter 1
Product Introduction
1 Super I/O controller
The VIA VT1211 I/O controller offers support for a variety of I/O function.
Provides a high-performance floppy disk controller for a 360K/720K/1.44M/
2.88M floppy disk drive, a multi-mode parallel port, two serial ports, and
a Flash ROM interface.
2 ATX power connector
This 20-pin connector connects to an ATX power supply. The power supply
must have at least 1A on the +5V standby lead (+5VSB).
3 AGP slot
This Accelerated Graphics Port (AGP) slot supports 1.5V AGP 8X/4X mode
graphics cards for 3D graphical applications.
4 CPU socket
Socket 462 (socket A) Zero Insertion Force (ZIF) for the AMD processor,
with 200/266/333/400MHz system bus.
5 North Bridge controller
The VIA KT600 controller integrates a high performance host interface for
the AMD processor, a DDR memory controller, and support AGP 8X
technology.
6 DDR DIMM sockets
These three 184-pin DIMM sockets support up to 3GB system memory
using unbuffered non-ECC PC2100/PC2700/PC3200 DDR DIMMs.
7 South Bridge controller
The VIA VT8237 integrated peripheral South Bridge controller communicates
with the North Bridge at the rates of up to 533MB/s using the VIA 8X VLink
technology. This controller supports standard UltraATA 133/100/66/33 and
provides separate data paths for each IDE channel for up to two IDE devices.
This controller also integrates SATA RAID controller, Ethernet MAC, Universal
Serial Bus Host controller.
8 Serial ATA connectors (optional)
These connectors support Serial ATA HDDs and allow for up to 150MB/s
data transfer rate, faster than the standard Parallel ATA with 133MB/s.
6
600A01-FOXCONN-V1.0-HW-en.p65
600A01 Series User Manual
6
2004-4-12, 13:29