1
Download BL600 Hardware Integration Guide
Transcript
BL6xx Hardware Integration Guide Single Mode BLE Module Version Revision Date Change History 11 June 2014 2 July 2014 14 July 2014 17 Oct 2014 24 Oct 2014 GPIO signal through the reset vector. New function to detect GPIO change with no current consumption, so UART closed but still able to detect for incoming data and be woken up so that the UART can be re-opened at the expense of losing that first character. Note that SIO_7 and AutoRUN (SIO_28) are not both high (externally), otherwise cannot load smartBASIC application script. Note on each module GND pin that must be connected to host PCB GND. Updated BT SIG information Important information on pin 22 (reset) and pin 23 (SWDCLK). Updated SIO VIL max value in table 5 Added BL620 module information Added QD ID and note to section 14 1.9 2.0 2.1 2.2 Embedded Wireless Solutions Support Center: http://ews-support.lairdtech.com www.lairdtech.com/bluetooth Laird Technologies Americas: +1-800-492-2320 Europe: +44-1628-858-940 Hong Kong: +852 2923 0610
