Download installation and servicing

Transcript
back
SERVICING
73 USER CONTROL REPLACEMENT
1. Refer to Frame 57.
2. Loosen the screw on the underside of the user control.
Ecl 2
044
Note. Only the display unit is replaced.
3. Pull the display unit forward to remove.
4. Push the new display unit into position.
5. Reassemble in reverse order.
6. Check operation of the boiler. Refer to Frame 57.
Display
unit
SERVICING
2
74 PRESSURE GAUGE REPLACEMENT
1. Refer to Frame 57.
2. Drain the boiler. Refer to Frame 77.
3. Unscrew the pressure gauge and discard.
4. Fit the new pressure gauge, using a suitable jointing
compound.
5. Refill the boiler. Refer to Frame 36.
Pressure gauge
Flow isolation valve
(shown in the open position)
50
203319-3.pmd
2041
6. Check operation of the boiler. Refer to Frame 57.
isar - Installation and Servicing
50
27/03/2008, 08:15