Download USER MANUAL

LTD User Manual Tip:Instead of browsing through the list of available stations with the item selectors you can use the STATION button to browse only stations with a defined run time.This comes in handy when modifying run times of an existing program.
Note: The PROGRAM position will remain lit, and the RUN TIME
position will be blinking, indicating that you are in PROGRAM
mode, working on the RUN TIME aspect of the program.
A couple of notes on run times:
• Run times longer than four minutes are run in ten second blocks and will be rounded up to the nearest block.
For instance, run times of 00:04:14 and 00:04:18 will both be rounded to 0:04:20.
• Run time shorter than four minutes are not rounded.
• The maximum run time is 17:59:50.
• You can "delete" a station from a program by simply setting the run time to 0.
5
Use the item selectors to select the number of minutes you wish the station to run, and push the ENTER button to save your setting.
Now the controller returns to the main screen for editing the run time. Say you just set station number five to run five minutes in program two, the display will look like this:
21