Download See it here - John Marcy
Transcript
Assembly Procedures The Gantry ships assembled and consists of a linear slide and motor. Be careful when handling the Gantry. The box packed with the Gantry contains all hardware necessary for installation. INSTALL THESE 2 LAST Install two of the larger bolts into the bottom two holes in the Top Rear extrusion from inside the tanning area. Leave them protruding out about 1/2”. Stand the Gantry vertically, with the motor at top, and hang it on the two bolts. Install bolts into the other two holes to secure the top of the Gantry but leave the four bolts a bit loose. Leave the bottom of the Gantry unsecured at this time. INSTALL THESE 2 FIRST LEAVE LOOSE 25528-02A 34