Download System Administrator Manual Voice Processing System

Edit Options
3-69
Chapter 3 - MAINT Application
Screen Length
This option determines the amount of time by which a caller
must respond with a name when prompted to do so through Call
Screening. The time is measured in seconds, with a maximum
value of 999 seconds.
Play Call Source
Activating this option means that if a message is left in a mailbox
to which an extension was forwarded, the originally dialed
extension is identified at the start of the message with a prompt
(e.g., “Message from John Smith,” if the call was originally
intended for John Smith’s extension, which was forwarded to the
extension from which the message is retrieved).
Transfer Strings
Default transfer strings are typically configured in the telephony
settings. Refer to “Transfer Settings” on page 3-34 for more
information. Any setting configured here overrides the default
configuration. Configure the transfer prefix and postfix for any
subscriber using this class of service.
Creating a COS
A class of service provides an easy way to modify an entire group of mailboxes or
extensions. By supporting multiple COSs, PathFinder provides you the ability to provide
subscribers with options to features on an as-needed basis.
To create a new COS:
1. Click on the COS icon.
2. When the Select COS to Edit window
displays, click on Create.
3. If you are using a template COS,
select the template from the dropdown list.
4. Enter a name for the COS (up to 20
characters), using any combination of
alphanumeric characters. The name
should describe the group of users in
this COS.
5. Click on Create to return to the
Select COS to Edit window.
6. Highlight the COS you created, and click on Select. The Edit COS window is
displayed, from which you can begin defining the COS.
PathFinder - System Administration
December, 2003 - Issue 4.5