Download OPEN COMPETITIVE BIDDING INDIA
Transcript
213 TECHNICAL SPECIFICATION FOR 6 Pair &1 Pair Telephone Cables 1.0 SCOPE: 1.1. The scope of the specification covers design, manufacture, testing, Packing, forwarding and delivery on fads basis of cables as detailed below:i. ii 0.63mm 6 pair un-armoured telephone cable 0.63mm single pair un-armoured telephone cable. 1.3. Six pair and single pair telephone cables are intended to interconnect the switching equipment to power line carrier communication terminal and interconnecting the switching equipment to telephone instruments. The telephone cables will carry voice and data signals with frequencies below 4 khz. The cables are intended for indoor use only. 2.0 standards: (i). The cables proposed for purchase shall conform to the following i.s. standards which shall mean latest revisions, amendments/changes adopted and published unless otherwise specified herein after. ----------------------------------------------------------------------------------------------standards title -----------------------------------------------------------------------------------------------telephone cables Is10579/ Is5831/84 polythene insulation and sheath of pvc insulation and sheath of electrical cables . -------------------------------------------------------------------------------------------------Equipment meeting with the requirement of other authoritative standards, including is which ensure equal or better performance than the standards mentioned above, shall also be considered. When the equipment offered by the bidder conforms to other standards, salient points of difference between standards adopted and the standards specified in this specification shall be clearly brought out in the relevant schedule. Four copies of such standards with authentic translation in english shall be furnished along with the offer. 3.0 climatic condition : 3.1. The cables called in this specification are required to operate satisfactorily as per the service conditions setout in the annexure of this specification. 4.0. Principal parameters: 4.2. Six pair/single pair cable