Download Aruba Instant User Guide - Airheads Community

Transcript
Chapter 25
AirWave Integration and Management
AirWave is a powerful and easy-to-use network operations system that manages Aruba wireless, wired, and
remote access networks, as well as wired and wireless infrastructures from a wide range of third-party
manufacturers. With its easy-to-use interface, AirWave provides real-time monitoring, proactive alerts,
historical reporting, and fast, efficient troubleshooting. It also offers tools that manage RF coverage,
strengthen wireless security, and demonstrate regulatory compliance.
Aruba IAPs communicate with AirWave using the HTTPS protocol. This allows an AirWave server to be
deployed in the cloud across a NAT device, such as a router.
AirWave Features
This section describes the AirWave features that are available in the Aruba Instant network.
Image Management
AirWave allows you to manage firmware updates on WLAN devices by defining a minimum acceptable
firmware version for each make and model of a device. It remotely distributes the firmware image to the
WLAN devices that require updates, and it schedules the firmware updates such that updating is completed
without requiring you to manually monitor the devices.
The following models can be used to upgrade the firmware:

Automatic— In this model, the Virtual Controller (VC) periodically checks for newer updates from a
configured URL and automatically initiates upgrade of the network.

Manual— In this model, the user can manually start a firmware upgrade on a VC-by-VC basis or set the
desired firmware preference per group of devices.
IAP and Client Monitoring
AirWave allows you to find any IAP or client on the wireless network and to see real-time monitoring views.
These monitoring views can be used to aggregate critical information and high-end monitoring information.
Template-based Configuration
AirWave automatically creates a configuration template based on any of the existing IAPs, and it applies
that template across the network as shown in Figure 160. It audits every device on an ongoing basis to
ensure that configurations never vary from the enterprise policies. It alerts you whenever a violation is
detected and automatically repairs the misconfigured device.
Instant 6.1.3.4-3.1.0.0 | User Guide
AirWave Integration and Management | 205