Download IQTD-GS400

2015 IQtronic technologies Europe s.r.o.
20. Configuration of original English set of
commands
If you change and upload an incorrect set of commands in another language into your
device, you are allowed to get back to the original set of commands in English.
Firstly, disconnect your device from the power supply, press the push button and hold
it down. Then connect it to the power again and release the push button. By this way
the original set of commands will be configured into your device.
21. Operation, maintenance and security safety
recommendations






The product is not intended to be a security device, it provides this service only
as supplementary.
The product was designed only to indoor use, such as homes, offices, etc. Do
not expose the device to liquid, moisture, or aggressive environment. Do not
expose the product to an excessive vibration or shock, high temperature, and
prevent it from falling as this may damage it. If you use the product in other
conditions than the standard 25°C, you will shorten the life span of the
internal battery and other components.
Before use, please check, if mobile phones can be used in the area, where you
wish to install the device. If not, please do not put the product into operation,
as it can have negative influence on other electronic systems!
Please connect appliances with the maximum current bellow 16A. If you need to
switch higher current load, please use an external contractor rated for target
load. Switching higher than nominal rating currents and/or loads with severe
inductive/capacitive character with high startup currents can cause permanent
damage of switching elements.
Before using a SIM card, please delete all received SMS messages from your
SIM card.
The product is not a toy for children; a SIM card represets a small part that can
be easily ingested.
Page 79 of 80