Download MobIP Webinterface User`s Manual

TOPEX MobiLinkIP
User`s Manual
Target – the number of the local extension where the calls will be routed which are coming in through the
respective Mobile interface (196, 241, 283, etc in the examples used).
DISA – select No (default) or Yes from the drop list.
If choosing YES, the value in the field Target doesn’t matter any longer, the caller will receive a DISA
tone allowing him to dial the number of the local extension he wants to reach. See below the routing of such a
call, coming in through interface Mobile1 and being connected to destination by means of DISA dialing:
Ignore
You may set MobiLink to ignore any number of digits out of the numbering (Caller
ID) coming in through each mobile module. From the drop list, select the number of digits to
be ignored, from “00” (no digits are ignored) up to “15” .
Limit
You may impose a time limit upon individual calls
made over each mobile module. Setting “limit” to 1599 for
example means that no call can have a duration of 1600
seconds – the calls will be disconnected when they reach
1599 seconds.
TOPEX S.A.
+4 021.408.39.00
http://www.topex.ro
Page 73 of 105