Download Fusion 150 - Prolight Concepts

Operating instructions
DMX channel selection:
Operating in DMX control mode gives the user the greatest flexibility when it comes to customising or creating a show. In this mode you will be able to control each individual trait of the fixture and each fixture independently.
To access the DMX channel mode, press the “MODE” button on the font of the unit to show CHnd on the LED display. Now press the “ENTER” button and the channel mode will be displayed. Use the “UP” and “DOWN” buttons to choose one of the 1, 4, 7, or 10 DMX channel modes. Press the
“ENTER” button again, this will set the DMX channel. The display will now display Addr.
To exit out of any of the above options, press the “MODE” button.
1 channel mode:
Channel
Value
Function
1
0-7
Blackout
8-127
Auto run (AT01)
128-255
Sound active (128: low sensitivity, 255: high sensitivity)
www.prolight.co.uk
Fusion 150 User Manual
5