Download PCAN-Ethernet Gateway DR
Transcript
PCAN-Ethernet Gateway DR – User Manual 5.5.3 Software Update Initiating a software update will update the firmware, software, as well as the configuration website. The currently installed software package version is indicated by the software version number. This number can be found on this page Device > Software Update itself as well as on the Device page. Current product updates can be downloaded on the PEAK-System website (www.peak-system.com). Please make sure to download the correct package for your device. Every version of the PCANGateway product family has a separate download package. Perform a software update: 1. Use the button on the left to choose the software package (*.tar). 2. Start the process with the Start Software Update button. Please note: In order to prevent conflicts all CAN interfaces as well as all created routes will be put on standby. 3. After the software update has completed the device will reboot. You will be forwarded to the login page in which case the process was successful and all routes and CAN interfaces have been reactivated. Note: If the update process was interrupted, you will have to restart the device in order to reactivate the routes and CAN channels. Use the Reboot Device link located near the bottom of the main navigation, alternatively you can use the physical Reset button located on the device itself. 45