1
Download SMC Flex SMC-3 - Selection Guide
Transcript
Bulletin 150 Reduced Voltage Starters Product Overview/Modes of Operation Bulletin 150 — Solid-State Reduced Voltage Starters The Allen-Bradley SMC™ Smart Motor Controller product line offers a broad range of products for starting and stopping standard 3-phase squirrel-cage induction motors and wye-delta motors. SMC™ Flex SMC™-3 200…690V 1…1250 A 200…600V 1…480 A Soft Start S S Kickstart S S Current Limit S S Dual Ramp Start S — Features Full Voltage S — Energy Saver — — Soft Stop S S Pump Control O — Preset Slow Speed S — Linear Acceleration/Deceleration S — Torque Control — — SMB™ Smart Motor Braking O — Accu-Stop™ O — Slow Speed with Braking O — Integrated Bypass Contactor S S Integrated Motor Overload Protection S S Single-phase Operation — — DPI Communication S — Metering S — Real Time Clock — — Motor Winding Heater Function ‡ — Diagnostic Faults and Alarms S — Motor and Starter — — Individual Bit Enable of Faults and Alarms — — Automatic Tuning of Motor Parameters — — Parameter Configuration/Programming S — Human Interface Module (HIM) O — Parameter Configruation Module — — Configuration Software: Drives Explorer and Drives Executive O — Digital I/O Expansion Module§♣ — — Ground Fault/CT/PTC Module§ — — Network Communications O — Inside Delta Connection S S Standards Compliance: CE Marked per Low Voltage Directive 73/23/EEC, 93/68/EEC CSA Certified (File No. LR 1234) UL Listed (File No. E96956) S S Page 6 Page 30 Product Selection S = Standard Feature O = Optional Feature Starter does not include a configuration device as standard. ‡ Option using a Bulletin 1410 motor winding heater. § With removable terminal block. ♣ Starter ships with 2 DC inputs and 2 relay outputs as standard. ♠ The starter is fully solid-state (no integral bypass). An external bypass contactor can be added as an option. & Note: Information for this product line is available on the Industrial Controls catalog web site: www.ab.com/catalogs. Δ Note: Information for this product line is available in publication 150-SG010* or on the Industrial Controls catalog web site: www.ab.com/catalogs. www.ab.com/catalogs Publication 150-SG009F-EN-P 3
