Download ComProbe FTS4BT User Manual

Chapter 6 Saving and Importing Data
6.1 Saving Your Data
You can save all or part of the data that you have captured. You can also load a previously saved capture file, and
save a portion of that file to another file. This feature is useful if someone else needs to see only a portion of the
data in your capture file.
On the Control window toolbar you can set up to capture a single file. Click here to see those settings.
There are two ways to save portions or all of the data collected during a data capture. Click here to see how to
capture data to disk.
6.1.1 Saving the Entire Capture File
This option is only available when you select Single File from the Capture Mode on System Settings. Click
here to learn more about selecting Save options from System Settings.
1. If you are capturing data, click on the Stop Capture
file while it is being captured.
2. Open the Event Display
3. Click the Save
or Frame Display
icon to stop data capture. You cannot save data to
window.
icon, or select Save from the File menu.
- 151 -