1
Download ComProbe BPA 500 User Manual
Transcript
ComProbe BPA 500 User Manual Chapter 2 Getting Started Figure 2.2 - ComProbe BPA 500 with antennas attached. 2.1.2 Connecting/Powering ComProbe Once you have attached the antennas, the next step is to power up and connect the ComProbe BPA 500 to the computer. 1. Insert the power cable (DC connector) from the 12 volt AC adapter into the "Power" port on the ComProbe (Figure 2.3). Figure 2.3 - Back Panel - Power 2. Plug the 12 volt AC adapter into the AC power source. AC Adapter Details: ECOPAC (UK) POWER LTD, Switch Mode Power Supply – Model: 3A-181WP09 P/N: T3508ST Input: 100-240V~, 50-60Hz, 0.6A Output: +9V-2.0A -5-
