Download ComProbe FTS4BT User Manual

Chapter 3 Configuration Settings
ComProbe FTS4BT User Manual
3. Go to the Start menu and find the Microsoft Keyboard program and use it to reconnect the keyboard.
4. Go to the Start menu and find the Microsoft Mouse program and use it to reconnect the mouse.
5. All traffic should now be sniffed.
3.1.2 FTS4BT I/O Datasource Settings
3.1.2.1 Air Data Source Dialog
The Data Source Control window provides access to and displays the status of the FTS4BT anlyser . As data is
being captured, the Status message at the top of the window indicates the synchronization status of the analyzer
. Also, the color of the icon in the system tray changes depending on the synchronization state.
There are five states:
Table 3.2 - FTS4BT Capture States
Color
Capture State
Blue = running and in sync with the piconet.
Green = running and waiting for piconet to form or reform
Yellow = attempts to resynchronize in 5 seconds.
Red = initializing
White = stopped.
The Functions of the Buttons
l
l
l
l
l
Resync Now - When you start sniffing, the buttons cycle through Green, Yellow, Red every thirty seconds.
When it is red it is resyncing. Selecting the Resync Now button causes it to be red immediately instead of
having to wait for the full thirty seconds.
Force AHS(79) – Forces the analyzer to sniff all 79 channels
Hardware Settings - opens a dialog box where you can change which FTS4BT device to use and get
information on the Device Address (BD_ADDR).
I/O Settings - opens a dialog box where you can change synchronization mode, device to sync to, and other
parameters related to encryption and packet capture.
Start Sniffing - sets up the analyzer using the settings from the I/O Settings window and synchronizes to the
piconet. This button changes its name to Stop Sniffing when it is in sniffing mode. If no ComProbe device is
plugged in, Start Sniffing button will be grayed out and the message "There is no Bluetooth ComProbe
plugged in. Please plug in a Bluetooth ComProbe" will be displayed in the status window. All settings are saved
automatically when you start sniffing.
- 16 -