1
Download Paddle Maker Design and Material Optimization
Transcript
Paddle Maker Machine and Material Selection Characteristics of Motors Used In Gearmotors Model Motor 6IK140A-AF induction motor 6IK140A-CF induction motor 6IK140A-SF induction motor 6IK140A-S3F induction motor Out- Motor with gear shaft put W Rated Volt Freq Poles Duty V Start Spd Curr Torq torq rpm A N.m N.m Capacitance Hz P μF/VAC 140 1ph110 50 4 CONT 1350 2.00 0.99 0.90 30.0/250 140 1ph220 50 4 CONT 1350 1.13 0.99 0.90 10.0/450 140 3ph220 50 4 CONT 1350 0.95 0.99 3.50 / 140 3ph380 50 4 CONT 1350 0.55 0.99 3.50 / 140 1ph220 50 2 CONT 2800 0.88 0.45 0.44 10.0/450 140 3ph220 50 2 CONT 2800 1.25 0.48 3.33 / 140 3ph380 50 2 CONT 2800 0.42 0.48 3.33 / 6IK140GU-AF gear motor gear motor 6IK140GU-CF gear motor gear motor 6IK140GU-SF gear motor gear motor 6IK140GU-S3F gear motor gear motor 6IK140A-DF induction motor 6IK140A-TF induction motor 6IK140A-T3F induction motor The required capacitor value will vary depending on operating voltage. A correct capacitor is required to match the applied voltage. General Motor Characteristics Insulation Resistance: 100MΩ at 500V between motor winding and shell Insulation Voltage:1500V 50/60Hz @1min between motor winding and shell Temperature Rise: Max 80oC Insulation Class: Class B (130oC) 136
