Download SATELEC Curing Light System Installation Instructions

CURING LIGHT ELECTRICAL CONNECTIONS
PROCENTER
WARNING
Before connecting the Curing Light, read
the Safety Instructions and User’s Manual provided
by the manufacturer. Failure to comply to the
instructions could result in serious injury.
Curing
Light
Note
Connections
Loop each wire thru
EMC Filter once.
• Black wire from 24 V Controller to
24 V on Terminal Board.
EMC
Filter
Black
24V
0V
Black
Black
24V
24V
Black
0 0
• Black wire from Curing Light to
0 V on Controller.
A B C D E F
• Red wire from Curing Light to
5 V on Controller.
Black
Terminal
Board
0V
5V
Red
• Black wire from 24 V Controller
to 0 V on Terminal Board.
Controller
DA179502i
© Midmark Corporation 2006
2