Download eCOV-110 User Guide 09f_Eng

1. eCOV-110 Product Introduction
1.1. Specifications
Ø Hardware
- CPU: Winbond W78E65P
- Memory: 32KB RAM, 64KB Flash
- Ethernet Port: x 1
l Interface: 10/100 Mbps Auto sensing
l Signal: ETX+, ETX-, ERX+, ERXl Protection: Built- in 1.5KV Magnetic Isolation
- Serial Port: x 1
l Signal: RS-232: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
l Baud Rate: 300 ~ 38400 bps
l Parity: None, Even, Odd
l Data Bits: 7, 8
l Stop Bit: 1, 2
l Flow Control: RTS/CTS, XON/XOFF, NONE
Ø Software
- Operation Mode: TCP Server, TCP Client, UDP
- Protocols: ICMP, TCP, IP, UDP, DHCP, HTTP
- Management: Web Console, Windows Utility. Command Mode
- Firmeware Upgrade: via Serial port, Windows-Based Utility
Ø Others
- Temperature/Humidity
l Operating: 0~55℃(32~131 ℉), 5~95% RH
l Storage: -20~85℃(-4~185 ℉), 5~95% RH
- Power Requirements:
l eCOV-110: 5-9V DC, 5V@ 300mA