Download KIC Hardware & Software Reference Guide

K I C
T H E R M A L
P R O F I L I N G
Note: If you’ve deselected the Show Edit Profile Notes on Profile Start
checkbox in the Global Preferences dialog box (Setup/Global Preferences, or
ALT+S+G) the Profile Notes dialog box will not appear.

Input any applicable notes and
click on the OK button. Your
temperature profile will appear on
the X/Y-graph.

Replace the jumper JP3 from the
OFF position, back to the ON
position inside the SlimKIC
Thermal Profiler.
JP3
ON 1
OFF 2
4
3
Note: This will ensure that when you’re ready to use the SlimKIC Thermal
Profiler again for a live profile via radio transmission, the jumper is in the correct
position. JP3 provides a hardware means of enabling or disabling the transmitter
function of the SlimKIC Thermal Profiler. With pins 1 & 4 jumped (closed) the
transmitter is ON, or enabled.

Use the Analysis Tools provided in the KIC software to examine your profile.
KIC Software v2.2 for Windows®
Page - 172