Download Regular AC Continuous Lighting Kit Setup Instructions

Step 4: Screw the light bulb into the ac light
socket. Make sure to use the base when
tightening, not the top, as shown in Figure 6.
When done, your light bulb and ac light socket
should match Figure 7.
Figure 6
Figure 7
Step 5: Mount the ac light socket on the light
stand. Start by loosening the screw at the base
of the ac light socket. Slide the ac light socket
onto the tip of the light stand and tighten the
screw until the ac light socket fits securely as
shown in Figure 8. Your assembly should then
look like Figure 9.
Figure 8
Figure 9
Step 6: Open the umbrella and insert the stem of the umbrella into the
umbrella hole in the ac light socket until the umbrella is secure as shown in
Figure 10.
Figure 11
Figure 10
Once fully assembled, your continuous
lighting kit should match that in Figure
11. To use, plug in the cord on the ac
light socket and flip the power switch.