Download ELOG User Manual

XVII.
ADD A DEVICE / ACTIVATE LOGGING
This paragraph explains the procedure to follow to create a Device which will be associated to a
driver or digital input.
Pre-requisites
You have already thought out the geographic or functional organization of the various Devices
your installation. (Level 1, 2, 3, 4 and category).
Your ELOG is accessible and you are connected to its embedded web pages.
The Driver for the device exists and/or the Digital input is configured.
for
Operating Mode
Click on "Configuration > Devices".
The following window is displayed:
Fill in:
o A "Label" for your Device
o The "Type": "Driver" or "Digital Input"
Driver:
-
Choose the "driver label" from the scroll-down list.
Either enable or disable "Index logs ". If you choose "Active", the
chronological logging of all values of the index type variable of the
device is activated.
35
ELOG MS1-7533-00 User manual