Download User Manual - EndRun Technologies

ENDRUN
TECHNOLOGIES
Set the IP address of the secondary name server to use for domain your.domain.
Enter secondary name server IP address (aaa.bbb.ccc.ddd): 192.168.1.2
Setting up TCP/IP...
Creating /etc/HOSTNAME...
Creating /etc/rc.d/rc.inet1...
Creating /etc/networks...
Creating /etc/hosts...
Creating /etc/resolv.conf...
*******************************************************************************
*******************************************************************************
*
*
*
The Praecis Cntp network configuration has been updated.
*
*
*
*
Please re-boot now for the changes to take effect.
*
*
*
*******************************************************************************
*******************************************************************************
*******************************************************************************
Verify Network Configuration
If you have made changes to your network configuration using netconfig, you should
shutdown the Præcis Cntp and re-boot it. There are two ways to do this:
1. Cycle power to the Præcis Cntp.
2. Issue the shutdown with re-boot command at the shell prompt:
Praecis Cntp-> shutdown –r now
If you are using the RS-232 serial I/O port to communicate with the Præcis Cntp, you
will be able to see the kernel generated boot messages when the unit re-boots. You
should note the line
Configuring eth0 as 192.168.1.245...
if you have set up a static IP address, or this line
Attempting to configure eth0 by contacting a DHCP server...
if you are using DHCP. It appears near the end of the kernel generated boot messages.
If you are using DHCP and are not using the RS-232 serial I/O port, you will have to
check the DHCP configuration information maintained by your DHCP server to determine the expected IP address and log in to the Præcis Cntp using telnet or ssh to
verify successful DHCP configuration. Refer to the subsequent topics in this section
Using Telnet and Using SSH, for details on logging in to the Præcis Cntp that way. Once
you have logged in, you may perform the following checks.
Præcis Cntp User’s Manual
14