1
Download Active Optical Cable Assembly
Transcript
SPECIFICATIONS Optical Characteristics QSFP+ Active Optical Cables are also available as half cable assemblies. Half cables with MTP connectors are available for applications that require connection to existing infrastructure. Breakout cables with four Duplex LC connectors are available for connecting a QSFP+ port to SFP+ or XFP transceivers. Table 8: QSFPO-40G Series Optical Performance Specifications Unit Min Max Center Wavelength nm 840 860 RMS Spectral Width nm 0.65 dB/Hz RIN OMA Encircled Flux Fiber Length dBm 0.1 100 dBm -5.0 -1.2 dB 3 Average Receive Power dBm -9.9 Receiver Sensitivity in OMA dBm Extinction Ratio At 19 µm At 4.5 µm -30 m Average Launch Power per Lane Defined as the standard deviation of the spectrum -128 ≥86% ≥30% Average Power of an Off Transmitter Notes Electrical connector to optical connector -1 -11.1 Table 9: QSFPO-56G Series Optical Performance Specifications Unit Min Max Center Wavelength nm 840 860 RMS Spectral Width nm RIN OMA 0.65 dB/Hz Fiber Length Average Launch Power per Lane Extinction Ratio 14 Defined as the standard deviation of the spectrum -128 ≥86% ≥30% Encircled Flux Average Power of an Off Transmitter Notes dBm At 19 µm At 4.5 µm -30 m 0.1 100 dBm -5.0 -1.2 dB 3 Average Receive Power dBm -9.9 Receiver Sensitivity in OMA dBm -1 -10.5 Electrical connector to optical connector
