Download ISOS 9

Here need to add more information for above figure.
Field
Description
Port ID
The bridge port ID. Valid values: 1...26 (1...24: DSL, 25...26: eth)
Admin Status
Show the port disable and enable status
Port Type
Accept Frame
type
Default CVID
Default SVID
Default Priority
Default Priority
Mode
Learning Mode
All: forward tagged/untagged packet by default
Tagged: Forward Tagged packet
Untagged: Forward Untagged packet
Customer VLAN ID, which is used to be the default Customer
VLAN ID. Valid values: 1...4093
Service VLAN ID, which is used to be the default Service VLAN
ID. Valid values: 1...4093
Set 802.1p value for the port, valid value: 0-7
Untagged :mean no 802.1p priority tag traffic
All: forward any 802.1p priority tag traffic
The state of learning on this bridge port, which is used to learn
VLAN ID. Valid values: disable / enable
3.2.2.2 XVID
This page displays the list of all CVIDs for any specific ports. You can transfer the CVID to predefined
SVID/CVID. Click CVID under the Configuration menu and display the page below.
Click on “Modify” button to display the modification page as below, where user will be able to modify
-16