Download Final Report Outline - Electrical and Computer Engineering

Transcript
dome in a Counter Clock Wise
LATCH_CW: True if the limit switch
rotation.
for the clock wise rotation is not
initialized.
If the LATCH_CW is latched it
causes that part of the rung to be
LLSD_DN: True if the timer has
false turning off the motor.
counted up to the designated time.
3
CW_IN: True if the clock wise CdS
CW_OUT: Sends an output to the
array is hit by the laser.
induction motor to rotate the
dome in a Clock Wise rotation.
LATCH_CCW: True if the limit switch
for the counter clock wise rotation is not
If the LATCH_CCW is latched it
initialized.
causes that part of the rung to be
false turning off the motor.
RLSD_DN: True if the timer has
counted up to the designated time.
4
LIMIT_R: True if the right limit switch
LATCH_CW: Latches a bit
has been triggered.
indicating that the latch has been
hit. This is used in rungs 2 and 5.
5
LATCH_CW: True if rung 4 is true.
TON: Sets a timer to allow for the
induction motor to stop any
momentum from the previous
rotation. When the count is done
it sets RLSD_DN high (see rung
3).
6
LATCH_CW: True if rung 4 is true.
LATCH_CW: This unlatches the
clock wise latch indicating that
CCW_IN: True if the counter clock wise the dome is done rotating from
7
Cds array is hit by the laser.
the limit switch.
LIMIT_L: True if the left limit switch
LATCH_CCW: Latches a bit
has been triggered.
indicating that the latch has been
40