Download BeanDevice® ProcessSensor User Manual

“Rethinking sensing technology”
Document Type : User Manual
9.4.2
Document version:2.0
BeanDevice® User Manual –
ProcessSensor product lines
Sensor configuration & calibration
This frame contains a set of 5 tabs:
Custom Display
Notes
Configuration
Measurement conditionning
& calibration
Log configuration
• Allows
the end user to customzie the sensor
• Contains notes relating
to the BeanDevice® sensor
• Sensor configuration interface. The user can configure the
alarm thresholds related to the sensor
• Depending on the BeanDevice® version which is used, other
configuration parameters are available
• Sensor or measurement channel calibration
• Logs configuration on the BeanScape®
9.4.2.1 Tab: Custom display
These parameters allow the user to customize his sensor:
 Type: Describe the sensor type (ex: load cell, pressure, Strain gage +/- 2 Mv/v, LVDT,…. )
 Unit: customer sensor unit (bar, °C, l/h….)
 Ratio : Sensor Ratio coefficient (RAT);
 Offset : Sensor Offset Coefficient (OFF);
 Label: Give a name to your sensor. (ex : Sensor on StatorMachine 1, sensor in Room 2 Floor 3)
Please consider the environment before printing this document.
Page : 94 / 134