Download User`s Manual
Transcript
Figure 13 Modulation submenu. Pulse Mod Submenu In the Pulse Mod submenu the pulse modulation can be accessed. Use the p n arrow keys to move the cursor to the parameter that you want to change. Use the o m and rotary knob to modify the parameters. On line 1, select between INT (internal pulse generator) and EXT (external input). If internal modulation (INT) is selected, go to line 2 to change pulse width to desired value, and go to line 3 to change pulse modulation frequency. Enable modulation by pressing the RF On/Off button. Exit the submenu by pressing the menu key. Figure 14 Pulse Modulation submenu Amplitude Mod Submenu In the Amplitude Mod submenu the internal amplitude modulation can be accessed. Use the rotary knob to set the modulation rate between 1 Hz and 10 kHz. Enable modulation by pressing the RF On/Off button. Exit the submenu by pressing the menu key. 36