Download User`s Manual

Transcript
Figure 13
Modulation submenu.
Pulse Mod
Submenu
In the Pulse Mod submenu the pulse modulation can be accessed. Use the p n
arrow keys to move the cursor to the parameter that you want to change.
Use the o m and rotary knob to modify the parameters.
On line 1, select between INT (internal pulse generator) and EXT
(external input).
If internal modulation (INT) is selected, go to line 2 to change pulse width to
desired value, and go to line 3 to change pulse modulation frequency.
Enable modulation by pressing the RF On/Off
button. Exit the submenu by pressing the
menu key.
Figure 14
Pulse Modulation submenu
Amplitude Mod Submenu
In the Amplitude Mod submenu the internal amplitude modulation can be
accessed. Use the rotary knob to set the modulation rate between 1 Hz and 10
kHz.
Enable modulation by pressing the RF On/Off
button. Exit the submenu by pressing the
menu key.
36