1
Download Quantity One® - Bio-Rad
Transcript
Quantity One User Guide The first time you use the GS-710, you must select some settings to ensure accurate calibration. Click on the Options button in the main acquisition window. This will open the Densitometer Options dialog box. Fig. 6-9. Densitometer Options dialog box. Note that calibration is always on for the GS-710. 6.5.a Step Tablet Values The built-in transmissive and reflective step tablets on your densitometer have specific density values. Before scanning for the first time, you must enter the values for your transmissive step tablet into the software. You can use the default values in the software for the reflective step tablet. Transmissive Step Tablet Before you scan in transmissive mode for the first time, you must specify the values for your transmissive step tablet. 94
