Download Knowledge Extraction Evolutionary Learning KEEL User Manual
Transcript
An example of running experiments with KEEL Standard use case Furthermore, we want to test the accuracy obtained by this method. To easily check the accuracy obtained by the C4.5 decision tree, we want to include a visualization method. To do so, we click on the visualization panel on the left side menu. This will prompt a list of methods organized by folders. Since we are using a single classification method, we expand the “Show Results (classification)” folder and select its only method “VisClass-Check”. Now, we click on any part of the right panel to place this visualization approach in the experiment. Figure 120 shows how the visualization method is added to the experiment. Figure 120: Adding a visualization method for the experiment Now we need to establish the execution flow of the experiment. In this case, we just need to connect the data, with the method and with the visualization approach. To do so, we click on the arrow (connection) on the left side menu. Then, we connect the “data” and “C45-C” elements, clicking on the first one and dragging the click to the second one. We repeat this action with “C45-C” and “Vis-Clas-Check”. Figure 121 displays the current state of the KEEL screen. Finally, we click on the generate ZIP experiment button on the top menu (Figure 122). This will prompt the generation of the zip experiment. A menu will be shown to select where we want to place our experiment and KEEL User Manual Page 98 of 176