Download Mosaic Console (first generation)

5
Operation
Logitek
DYN
To edit the dynamics (limiter and compressor) settings for an input, use the FCN wheel to select the
DYN function. Use the SEL wheel to toggle between dynamics in and out. Press the TAKE button to
bring up the dynamics settings menu. Use the FCN wheel to select a parameter, and then the SEL
wheel to adjust. The parameters are:
L THR
L RAT
L REL
C GAIN
C THR
C RAT
C ATK
C REL
Mode
Limiter Threshold
Limiter Ratio
Limiter Release Time
Compressor Gain
Compressor Threshold
Compressor Ratio
Comp. Attack Time
Comp. Release Time
In or Out
-20
1
10
0
-40
1
5
100
to +20 dB
to
40
to 1000 mSec
to
21 dB
to
0 dB
to
40
to
68 mSec
to 6000 mSec
Press the TAKE button again to exit the menu.
IN
Use the IN function to select other sources that have been permitted for that fader. If only one
source has been allowed for a fader, then no list will be available. Use the FCN wheel to select the
IN function, then the SEL wheel to scroll through the list to find the source that you wish to route to
that fader. Press the TAKE button to accept the change. Press the CNG button to cancel the change.
24
Logitek Mosaic Reference Manual