1
Download AP-51xx Access Point Product Reference Guide
Transcript
Configuring Access Point Security WEP 128 (104-bit key) Select the WEP 128 (104 bit key) button to display the WEP 128 Settings field within the New Security Policy screen. For specific information on configuring WEP 128, see Configuring WEP Encryption on page 6-16. KeyGuard Select the KeyGuard button to display the KeyGuard Settings field within the New Security Policy screen. For specific information on configuring KeyGuard, see Configuring KeyGuard Encryption on page 6-18. WPA/WPA2 TKIP Select the WPA/WPA2 TKIP button to display the WPA/TKIP Settings field within the New Security Policy screen. For specific information on configuring WPA/WPA2 TKIP, see Configuring WPA/WPA2 Using TKIP on page 6-21. WPA2/CCMP (802.11i) Select the WPA2/CCMP (802.11) button to display the WPA2/ CCMP Settings field within the New Security Policy screen. For detailed information on configuring WPA2/CCMP, see Configuring WPA2-CCMP (802.11i) on page 6-24. 6. Click Apply to keep changes made within the New Security Policy screen (if any). Configure encryption or authentication supported security policies by referring to the following: access point authentication: • To create a security policy supporting Kerberos, see, Configuring Kerberos Authentication on page 6-8. • To define a security policy supporting 802.1x EAP, see Configuring 802.1x EAP Authentication on page 6-11. access point encryption: • To create a security policy supporting WEP, see Configuring WEP Encryption on page 616. • To define a security policy supporting KeyGuard, see, Configuring KeyGuard Encryption on page 6-18. • To configure a security policy supporting WPA/TKIP, see Configuring WPA/WPA2 Using TKIP on page 6-21. • To create a security policy supporting WPA2/CCMP, see Configuring WPA2-CCMP (802.11i) on page 6-24. 6-7
