Download Ideal Full Catalogue 2006

Twist-On Wire Connectors . . . . . . . . . . . . . . . . . . A-2
Wire Connector Accessories . . . . . . . . . . . . . . . . A-10
Push-In Wire Connectors . . . . . . . . . . . . . . . . . . . A-11
Crimp Terminals & Splices . . . . . . . . . . . . . . . . . . A-14
Terminal Strips . . . . . . . . . . . . . . . . . . . . . . . . . . . A-22
Crimp Connectors & Insulators . . . . . . . . . . . . . . A-26
Set-Screw Wire Connectors . . . . . . . . . . . . . . . . . A-28
Mechanical Lugs . . . . . . . . . . . . . . . . . . . . . . . . . A-29
Wire Installation
Fish Tapes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-2
Fish Tape Accessories . . . . . . . . . . . . . . . . . . . . . B-6
Wire Pulling Lubricants . . . . . . . . . . . . . . . . . . . . B-7
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B-11
Conduit Benders . . . . . . . . . . . . . . . . . . . . . . . . . B-12
Pulling Supplies . . . . . . . . . . . . . . . . . . . . . . . . . . B-14
Tools and Totes
Wire Strippers . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-2
Pliers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-12
Cable Cutters . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-14
Crimp Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-15
Screwdrivers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-16
Miscellaneous Hand Tools . . . . . . . . . . . . . . . . . . C-20
Insulated Hand Tools . . . . . . . . . . . . . . . . . . . . . . C-22
Hole Saws . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-25
Drills & Bits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-28
Reciprocating Blades . . . . . . . . . . . . . . . . . . . . . . C-32
Tool Carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C-35
Wire Management
Cable Ties . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-2
Heat Shrink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-6
Heat Guns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-8
Wire Markers . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-10
Lockout/Tagout Products . . . . . . . . . . . . . . . . . . . D-15
Safety Signs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D-28
Test and Measurement
Digital Multimeters . . . . . . . . . . . . . . . . . . . . . . . E-2
Clamp Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-12
Ground Resistance Meters . . . . . . . . . . . . . . . . . E-16
Insulation & Earth Testers . . . . . . . . . . . . . . . . . . E-17
Power Quality Meters . . . . . . . . . . . . . . . . . . . . . . E-18
Circuit Analyzers . . . . . . . . . . . . . . . . . . . . . . . . . E-21
Circuit Breaker Finders . . . . . . . . . . . . . . . . . . . . E-22
Voltage/Continuity Testers . . . . . . . . . . . . . . . . . . E-24
Electrical Testers . . . . . . . . . . . . . . . . . . . . . . . . . E-26
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E-30
DataComm Equipment
Certification Testers . . . . . . . . . . . . . . . . . . . . . . . F-2
LAN Cable Testers . . . . . . . . . . . . . . . . . . . . . . . . F-5
Testers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-7
Hand Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-10
Crimp Tools & Die Sets . . . . . . . . . . . . . . . . . . . . F-13
Tool & Connector Kits . . . . . . . . . . . . . . . . . . . . . F-17
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F-22
Coaxial Connectors . . . . . . . . . . . . . . . . . . . . . . . F-24
Supplies
Commutator Maintenance Products . . . . . . . . . . G-2
Plastic Anchors . . . . . . . . . . . . . . . . . . . . . . . . . . . G-9
A
B
C
D
E
F
G
Table of Contents
Wire Termination
Wire Termination
A
Wire-Nut® Wire Connectors
■ Five color-coded models cover a full
range of wire sizes from 22 - 8 AWG
■ Fixed, square-wire spring creates its
own threads — maintains a secure
positive grip that will not relax over
time
■ No pre-twisting required — positive grip
design provides fast, easy installation
Wire Connectors
■ Deep, wide skirt helps protect against flash-over and turned-back strands
for maximum dielectric protection
■ Reusable for easy circuit changes and additions
Positive-grip
design
■ Tough, UL94V-2 flame-retardant shell rated at 105oC (221oF)
■ UL 486C Listed and CSA 22.2 #188 Certified; comply with Federal
Specification W-S-610E
■ Classified in accordance with IEC Publications 998-2 and 998-2-4
Dimensions
Model
71B
®
72B®
73B®
74B®
76B®
Model
Long, fully seated
square-wire spring
(Inches
mm )
A
11/64
4.5
11/64
4.5
11/64
4.5
17/64
7
9/32
7
Color
Tough, durable
thermoplastic shell
B
1/4
6.5
5/16
8
11/32
9
7/16
11
1/2
13
C
D
E
21/64
8
25/64
10
7/16
11
11/64
4.5
3/16
5
11/32
9
37/64
15
45/64
18
55/64
22
35/64
14
19/32
15
5/16
8
3/8
10
61/64
24
1-1/16
27
Threaded
entry
Deep skirt,
wide throat
Wire Combination
Range
Wire Combination
Range (mm)
Quantity
Cat. No.
300V
.64mm DIA to 1.29mm DIA
Min. .65mm2 – Max. 2.62mm2
Box of 100
Carton of 1,000
Keg of 25,000 (loose pack)
30-071
30-171
30-271
71B®
Gray
300V
No. 22 to 16 AWG
Min. 2 No. 22 – Max. 2 No. 16
72B®
Blue
300V
No. 22 to 14 AWG
Min. 2 No. 22 – Max. 3 No. 16
300V
.64mm DIA to 1.63mm DIA
Min. 65mm2 – Max. 3.93mm2
Box of 100
Carton of 1,000
Keg of 10,000 (loose pack)
30-072
30-172
30-272
Orange
600V*
No. 22 to 14 AWG
Min. 1 No. 18 & 1 No. 20
Max. 4 No. 16 & 1 No. 20
600V*
.64mm DIA to 1.63mm DIA
Min. 1.34mm2
Max. 5.76mm2
Box of 100
Jar of 300
Carton of 1,000
Keg of 10,000 (20 bags, 500 ea.)
Keg of 10,000 (loose pack)
30-073
30-073J
30-173
30-273
30-673
Yellow
600V*
No. 18 to 12 AWG
Min. 2 No. 18
Max. 4 No. 14 & 1 No. 18
600V*
1.02mm DIA to 2.05mm DIA
Min. 1.64mm2
2
Max. 9.14mm
Box of 100
Jar of 175
Carton of 1,000
Keg of 10,000 (20 bags, 500 ea.)
Keg of 10,000 (loose pack)
30-074
30-074J
30-174
30-274
30-674
600V*
1.02mm DIA to 2.59mm DIA
Min. 4.16mm2
Max. 17.14mm2
Box of 100
30-076
Red
600V*
No. 18 to 10 AWG
Min. 2 No. 14
Max. 2 No. 10 & 2 No. 12
Carton of 1,000
30-176
Keg of 5,000 (20 bags, 250 ea.)
30-276
73B®
74B®
76B
®
*1,000V maximum in fixtures and signs
EN 60-998-2-4
A-2
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
High Temperature Wire-Nut® Wire Connectors
All of the Wire-Nut® Wire Connector features plus:
■ Black, thermoplastic shell specially designed to withstand the
extreme heat build-up commonly found in high-wattage light
fixtures and signs. UL Listed to 150°C (302°F)
Model
71B®
72B®
73B®
59B™
Wire Combination
Range
Wire Combination
Range (mm)
300V
No. 22 to 16 AWG
Min. 2 No. 22 Str
Max. 2 No. 16
300V
.64mm DIA to 1.29mm DIA
Min. .65mm2
Max. 2.62mm2
300V
No. 22 to 14 AWG
Min. 2 No. 22
Max. 3 No. 16
300V
.64mm DIA to 1.63mm DIA
Min. .65mm2
Max. 3.93mm2
600V*
No. 22 to 14 AWG
Min. 1 No. 18 w/1 No. 20
Max. 4 No. 16 & 1 No. 20
600V*
.64mm DIA to1.63mm DIA
Min. 1.34mm2
Max. 5.76mm2
600V*
No. 22 to 12 AWG
Min. 2 No. 20
Max. 3 No. 14
600V*
.64mm DIA to 2.05mm DIA
Min. 1.04mm2
Max. 6.24mm2
Color
Black
Black
Black
Black
Quantity
Cat. No.
Carton of 1,000
30-151
Keg of 25,000 (loose pack)
30-251
Carton of 1,000
30-152
Keg of 10,000 (loose pack)
30-252
Carton of 1,000
30-153
Keg of 10,000 (loose pack)
30-253
Box of 100
30-059
Carton of 1,000
30-159
Keg of 5,000 (loose pack)
30-259
*1,000V maximum in fixtures and signs
Dimensions
(Inches
mm )
Model
A
B
C
D
E
71B®
Black
5/32
4
1/4
6.5
21/64
8
13/64
5
37/64
15
72B®
Black
13/64
5
5/16
8
25/64
10
15/64
6
45/64
18
73B®
Black
13/64
5
23/64
9
7/16
11
3/8
9.5
55/64
22
59BTM
Black
13/64
5
13/32
10
31/64
12
37/64
14.5
1-1/16
27
1-800-435-0705 for Customer Service
www.idealindustries.com
A-3
Wire Connectors
■ Four models to cover wire ranges from 22 through 12 AWG
Wing-Nut® Wire Connectors
■ Three color-coded models cover a full range of wire sizes
from 18 through 6 AWG
■ Specially designed contoured wings provide a
secure grip for extra leverage on maximum wire
combinations
■ Live-action spring expands to accept wire shape
and size with no pre-twisting required
Wire Connectors
■ Square-wire spring threads directly onto conductors
for fast, secure connections
■ Deep skirt helps protect against flash-over and turned-back
strands for maximum dielectric protection
■ Easily removed for repeat usage on same size or larger wire
combinations
Tough, durable
thermoplastic shell
■ Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
Live-action,
square-wire spring
■ UL 486C Listed and CSA 22.2 #188 Certified; comply with
Federal Specification W-S-610E
■ Classified in accordance with IEC Publications 998-2 and
998-2-4
Dimensions
(
Deep skirt,
wide throat
Built-in
contoured wings
)
Inches
mm
Model
A
B
C
D
E
451®
15/64
6
11/32
9
11/16
18
5/16
8
1-1/64
26
452®
21/64
8.5
15/32
12
15/16
24
5/16
8
1-15/64
31.5
454®
7/16
11
5/8
16
1-3/16
30
13/32
10.5
1-15/32
37.5
92®
21/64
8.5
13/32
10.5
29/32
23
9/32
10
1-5/32
30
Wire Combination
Range
Wire Combination
Range (mm)
Quantity
Cat. No.
Yellow
600V*
No. 18 thru 10 AWG
Min. 2 No. 18
Max. 3 No. 12
600V*
1.02mm DIA to 2.59mm DIA
Min. 1.64mm2
Max. 9.93mm2
Box of 100
Jar of 225
Carton of 1,000
Keg of 10,000 (20 bags, 500 ea.)
30-451
30-451J
30-551
30-651
®
452
Red
600V*
No. 18 thru 8 AWG
Min. 2 No. 18
Max. 5 No. 12
600V*
1.02mm DIA to 3.26mm DIA
Min. 4.16 mm2
Max. 16.55 mm2
Box of 100
Jar of 300
Carton of 1,000
Keg of 5,000 (10 bags, 500 ea.)
30-452
30-452J
30-552
30-652
600V*
1.63mm DIA to 4.12mm DIA
Min. 9.93mm2
Max. 29.9mm2
30-454
Blue
600V*
No. 14 thru 6 AWG
Min. 3 No. 12
Max. 2 No. 6 & 1 No. 12
Box of 50
454®
Keg of 2,500 (25 bags, 100 ea.)
30-654
Model
451®
Color
*1,000V maximum in fixtures and signs
EN 60-998-2-4
A-4
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Greenie® Grounding Connector
■ Designed for making ground connections and bonding
non-metallic sheathed cable
■ Contoured wings for maximum leverage
■ Live-action, square-wire spring provides superior
grounding connections
■ UL 467 Listed and CSA 22.2 #188 Certified; complies with
Federal Specification W-S-610E
Model
92®
Wire Combination
Range
Wire Combination
Range (mm)
Quantity
Cat. No.
No. 14 thru 10 AWG
Min. 2 No. 14
Max. 3 No. 12 & 1 No. 14
1.63mm DIA to 2.59mm DIA
Min. 4.16 mm2
Max. 12.01 mm2
Box of 100
Carton of 1,000
Keg of 5,000 (10 bags, 500 ea.)
30-092
30-192
30-292
Greenie® Grounding Connector fully meets the intent of the
N.E.C. and specifically aids in compliance with the following:
ARTICLE 250: GROUNDING
250-74
Connecting Receptacle
Grounding Terminal to Box
ARTICLE 370: OUTLET, SWITCH
AND JUNCTION
BOXES AND FITTINGS
250-113
To Conductors and
Equipment
370-4
250-114
Continuity and Attachment of
Branch-Circuit
Equipment Grounding
Conductors to Boxes
(b) Nonmetallic Boxes
ARTICLE 550: MOBILE HOMES
AND PARKS
550-11
Grounding
(b & c) (2) Equipment Grounding
Means
1-800-435-0705 for Customer Service
Metal Boxes
www.idealindustries.com
A-5
Wire Connectors
■ Tough, UL 94V-2 flame-retardant shell
Twister® Wire Connectors
■ Exceptional wire-range capacity — two models
handle wire combinations from as small as
22 AWG to as large as 6 AWG
Tough, durable
thermoplastic
shell
■ Ribbed cap provides a secure
grip and fast fingertip starts
Live-action,
square-wire
spring
Wire Connectors
■ Swept wings offer extra
leverage and less
effort for large wire
combinations
■ Hexagonal shape
accommodates standard
nutdriver for tool installation
Compact
swept wings
■ Live-action, square-wire spring locks onto wire for safe,
secure connections
■ Deep skirt helps protect against flash-over and turned-back
strands for maximum dielectric protection
Deep,
threaded
skirt entry
■ Easily removed for repeat usage on same size or larger
wire combinations
■ Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
■ UL 486C Listed and CSA 22.2 #188 Certified; comply with
Federal Specification W-S-610E
■ Classified in accordance with IEC Publications 998-2 and 998-2-4
Model
341®
342
Wire Combination
Range
Color
®
Wire Combination
Range (mm)
Tan
600V*
No. 22 thru 8 AWG
Min. 3 No. 22
Max. 3 No. 10
600V*
.64mm DIA to 3.26mm DIA
Min. .97mm2
Max. 15.78mm2
Gray
600V*
No. 18 thru 8 AWG
Min. 3 No. 14
Max 2 No. 10 w/4 No. 12 Solid
600V*
1.02mm DIA to 3.26mm DIA
Min. 6.24mm2
Max. 23.76mm2
Quantity
Cat. No.
Box of 50
Box of 100
Jar of 750
Bag of 500
Carton of 1,000
30-141
30-341
30-341J
30-641
30-541
Box of 25
30-142
Box of 50
30-342
Bag of 250
30-642
*1,000V maximum in fixtures and signs
EN 60-998-2-4
Combination
Cir Mil Area
3#22
1,920 (.97mm2)
3#14
12,330 (6.24mm2)
3#10
31,140 (15.78mm2)
2#10 w/4#12
46,880 (23.76mm2)
341®
342®
Dimensions
A-6
(Inches
mm )
Model
A
B
C
D
E
341®
Tan
17/64
7
29/64
11.5
23/32
18
23/64
9
1-1/8
28.5
342®
Gray
3/8
9.5
9/16
20
1.0
25.5
13/32
10.5
1-19/64
33
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Wire Connector
Wire Connectors
■ SureGrip™ overmolding
provides better
grip for improved
leverage and
more torque
■ Comfortable swept
wings designed to
help reduce hand
fatigue
■ Expanding square-wire
spring provides a secure
connection every time
Molded vertical
grooves provide
maximum grip
■ Better grip and more leverage
for faster connections with
less effort
Patented sweptwing SureGrip™
design
Exceptional wire range
and capacity
- Min. 2 #18 AWG
- Max. 4 #10 AWG
Model
Color
344
Red/Gray
Wire Combination
Range
Wire Combination
Range (mm)
600V*
No. 22 to 8 AWG
Min. 2 No. 18
Max. 4 No. 10
600V*
.64mm DIA to 3.26mm DIA
Min. 1.64mm2
Max. 21mm2
Quantity
Cat. No.
Tube of 25
30-144J
Jar of 250
30-244J
Jar of 500
30-644J
*1,000V maximum in fixtures and signs
Combination
344®
Min. 2 #18
Dimensions
4 #14
5 #12
Max. 4 #10
(Inches
mm )
Model
A
B
C
D
E
344
Red/Gray
11/32
8.8
1/2
12.7
15/16
23.5
7/16
10.7
1-1/4
31.8
1-800-435-0705 for Customer Service
www.idealindustries.com
A-7
Twister® DB Plus™
Wire Connector
Ribbed cap for
hand or nutdriver
installation
■ Smallest wet location/direct burial connector with
widest wire range — covers wire sizes from 20 AWG
through 12 AWG
■ Non-hardening sealant completely seals out moisture
to protect conductors from fungus and corrosion —
remains stable from -40°C (-40°F) to 105°C (221°F)
Square-wire
spring
Wire Connectors
■ Compact, one-piece design features ribbed cap, swept
wings and hexagonal head for easy installation by hand
or with standard nutdriver
■ Live-action, square-wire spring locks onto wire for safe, secure connections
Non-hardening
sealant
■ Deep skirt provides maximum dielectric strength
■ Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
Swept wings for
added torque
and comfort
■ Certified for underground and wet locations — UL 486D Listed
and CSA C22.2 #188.2 Certified; complies with Federal
Specifications W-S-610E
Model
Wire Combination
Range
Wire Combination
Range (mm)
600V*
No. 22 to 8 AWG
Min. 1 No. 18 & 1 No. 20
Max. 1 No. 10 & 2 No. 12
600V*
.64mm DIA to 3.26mm DIA
Min. 1.34mm2
Max. 11.88mm2
Color
60
Blue
Quantity
Cat. No.
Card of 2
Card of 10
Card of 25
Box of 100
Carton of 1,000
30-060
30-760
30-160
30-260
30-360
*1,000V maximum in fixtures and signs
Dimensions
A-8
(Inches
mm )
Model
A
B
C
D
E
60
9/32
7.1
17/32
13.5
41/64
16.2
55/64
22
1-21/32
42
www.idealindustries.com
WARNING:
1. One time use only. Do not reuse.
2. Wiring must comply with all applicable electrical codes.
3. Contact IDEAL for complete wire combination listing.
1-800-435-0705 for Customer Service
Wire Termination
Twister® AI/Cu Wire Connector
■ Only aluminum-to-copper twist-on connector specifically
designed to guarantee a secure connection while
preventing aluminum corrosion
■ Specially formulated corrosion- resistant
compound cuts and penetrates corrosion
build-up on aluminum conductors for increased
conductivity and cooler connections
■ Compact, one-piece design features ribbed cap, swept
wings and hexagonal head for easy installation by hand
or with standard nutdriver
Live-action,
square-wire
spring expands
and contracts
with aluminum wire
■ Live-action, square-wire spring expands and contracts with
aluminum wire
■ Deep skirt provides maximum dielectric strength
Compound cuts
corrosion build-up
on aluminum
conductors
■ Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
■ Complies with N.E.C. Section #110-14(b) for aluminum-to-copper
connections; UL 486C Listed and CSA C22.2 #188 Certified;
complies with Federal Specification
W-S-610E
Entry cap retains
corrosion-resistant
compound
■ UL 467 Listed for grounding and bonding
Model
Color
65
Wire Combinations
1 No. 10 Al solid w/1 or 2 No. 10 Cu solid
1 No. 10 Al w/1 or 2 No. 12 Cu
2 No. 10 Al solid w/1 No. 12 Cu
1 No. 10 Al w/1 or 2 No. 14 Cu
2 No. 10 Al solid w/1 No. 14 Cu
2 No. 12 Al solid w/1 No. 10 Cu
1 No. 12 Al solid w/1 or 2 No. 10 Cu
1 No. 12 Al stranded w/1 or 2 No. 10 Cu solid
1 No. 12 Al w/1 or 2 No. 12 Cu
2 No. 12 Al solid w/1 No. 12 Cu
1 No. 12 Al w/1 or 2 No. 14 Cu
2 No. 12 Al solid w/1 No. 14 Cu
1 No. 10 Al w/1 or 2 No. 18 Cu
2 No. 10 Al solid w/1 No. 18 Cu
1 No. 12 Al w/1 or 2 No. 16 Cu
2 No. 12 Al solid w/1 No. 16 Cu
1 No. 10 Al w/1 or 2 No. 16 Cu
2 No. 10 Al solid w/1 No. 16 Cu
1 No. 12 Al w/1 or 2 No. 18 Cu
2 No. 12 Al solid w/1 No. 18 Cu
Purple
600V maximum building wire; 1,000V signs or lighting fixtures
Dimensions
Quantity
Cat. No.
Card of 2
30-065
Card of 10
30-765
Card of 25
30-165
Box of 100
30-265
Carton of 1,000
30-365
Wire Connector
also listed as
grounding equipment
(Inches
mm )
Model
A
B
C
D
E
65
17/64
7
13/32
10.5
13/16
21
35/64
14
1-11/32
34
1-800-435-0705 for Customer Service
WARNING:
1. One time use only. Do not reuse. Not to be used when
connecting only aluminum conductors.
2. Wiring must comply with all applicable electrical codes.
3. Contact IDEAL for complete wire combination listing.
www.idealindustries.com
A-9
Wire Connectors
Ribbed cap for hand
or nutdriver
installation
Buchanan Construction Products
B-CAP® Wire Connectors
■ Three color-coded models cover a full range of wire sizes
from 22 through 6 AWG
■ Contoured Classic FinsTM provide a secure grip for extra leverage
on maximum wire combinations
■ Live-action spring expands to accept wire shape and
size with no pre-twisting required
Wire Connectors
■ Square-wire spring threads directly onto conductors
for fast, secure connections
■ Deep skirt protects against flash-over and turned-back strands
for maximum dielectric protection
■ Easily removed for repeat usage on same size or larger
wire combinations
■ Tough, UL 94V-2 flame-retardant shell rated at 105oC (221oF)
■ UL 486C Listed and CSA 22.2 #188 certified; complies
with Federal Specification W-S-610E
■ Classified in accordance with IEC Publications 998-2 and 998-2-4
Model
B1
Wire Combination
Range
Wire Combination
Range (mm)
Quantity
Cat. No.
600V*
No. 22 thru 10 AWG
Min. 2 No. 18
Max. 3 No. 12
600V*
.635mm DIA to 2.59mm DIA
Min. 1.64mm2
Max. 9.93mm2
Box of 100
Jar of 250
Bucket of 2,500 (5 bags, 500 ea.)
Keg of 10,000 (20 bags, 500 ea.)
B1-1
B1-250JR
B1-25
B1-B
Red
600V*
No. 22 thru 8 AWG
Min. 2 No. 18
Max. 5 No. 12
600V*
.635mm DIA to 3.26mm DIA
Min. 1.64mm2
Max. 16.55mm2
Box of 100
Jar of 350
Jar of 600
Bucket of 2,500 (5 bags, 500 ea.)
Keg of 10,000 (20 bags, 500 ea.)
B2-1
B2-350JR
B2-600JR
B2-25
B2-B
600V*
1.63mm DIA to 4.12mm DIA
Min. 6.6mm2
Max. 26.6mm2
Box of 50
B4-1
Blue-Gray
600V*
No. 14 thru 6 AWG
Min. 2 No. 12
Max. 2 No. 6
Bucket of 1,000 (4 bags, 250 ea.)
B4-25
Keg of 2,500 (10 bags, 250 ea.)
B4-B
Color
Yellow
B2
B4
*1,000V maximum in fixtures and signs
EN 60-998-2-4
Buchanan Construction Products
B-CAP® Green-B® Grounding Connector
■ Designed for making ground connections and bonding
non-metallic sheathed cable
■ Live-action, square-wire spring provides superior
grounding connections
■ Tough, UL 94V-2 flame-retardant shell rated at 105oC (221oF)
■ UL 467 Listed and CSA 22.2 #188 Certified; complies with
Federal Specification W-S-610E
Model
BGR
A-10
Wire Combination
Range
Wire Combination
Range (mm)
Quantity
Cat. No.
No. 14 thru 10 AWG
Min. 2 No. 14
Max. 5 No. 12
1.63mm DIA to 2.59mm DIA
Min. 4.16mm2
Max. 16.5mm2
Box of 50
Bucket of 2,500 (10 bags, 250 ea.)
Keg of 5,000 (20 bags, 250 ea.)
BGR-1
BGR-25
BGR-B
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Wire-Nut® Wire Connector Sockets
Wire-Nut® Wire Connector
Wrench/Screwdriver Combo
■ Speeds installation of Wire-Nut®
Wire Connectors
■ Speeds installation of Wire-Nut®
Wire Connectors
■ Fit any pneumatic or
electric tool
with a 1/4 in.
chuck or
drive socket
For Connector Model
Cat. No.
71B , 71B Black, 72B & 72B Black
30-903
For Connector Model
73B® & 73B® Black
30-904
74B® & 76B®
Mechanic – 1/4 in. x 4 in.
30-331
59B™
30-905
74B® & 76B®
Electrician – 3/16 in. x 6 in.
30-333
74B®, 76B® & 59B™
30-906
®
®
®
®
Type
Wire-Nut® Wire Connector Wrench
Nutmaster® Nutdrivers
■ Speeds installation of Wire-Nut®
Wire Connectors
■ Speeds installation of Twister®
Wire Connectors
■ Excellent leverage
helps reduce fatigue
■ Nickel/chrome plated to
resist rust and corrosion
Cat. No.
■ Cushioned rubber grip
For Connector Model
Cat. No.
73B®, 74B® & 76B®
H-632
For Connector Model
Cat. No.
341®
35-292
342
35-295
®
Spin-Twist® Wire Connector Socket
Ratch Wrench
■ Speeds installation of IDEAL
and BUCHANAN Wire
Connectors
■ Speeds installation of
B-CAP® Wire Connectors
■ Either end accepts 1/4-in.
drive for tight-spot
wire splicing
■ For use with electric
corded or cordless
drill drivers
■ 1/4 in. chuck fits
most drills or drive sockets
For Connector Model
Cat. No.
For Connector Model
Wire-Nut®, Wing-Nut®, Twister®, B-CAP® and WingTwist™
30-902
B1, B2 & B4
Cat. No.
BR-5
7-in-1 Screwdriver
High-Speed Wire Connector Chuck
■ Facilitate installation of
connectors
■ Cordless screwdriver adapter
for installing B-CAP®
Wire Connectors
■ Universal Wire-Nut®
Wrench in handle
■ Accepts most twist-on
connectors
For Connector Model
Cat. No.
For Connector Model
7-in-1 Twist-a-Nut™
35-908
B1, B2 & B4
1-800-435-0705 for Customer Service
Cat. No.
HSC-1
www.idealindustries.com
A-11
Wire Connectors
■ Slotted-tip screwdriver
with convenient
connector-wrench
socket in end of
insulated handle
In-Sure™ Push-In Wire Connectors
■ Accepts the following copper wire sizes
1.
Strip
- Solid
#20 AWG - #12 AWG solid
- Stranded
#16 AWG - #14 AWG (stranding pattern 19 strand or less)
#18 AWG (stranding pattern 7 strand or less)
2.
Wire Connectors
- Stranded (tin bonded)
#14 AWG - #12 AWG (stranding pattern 19 strand or less)
#16 AWG (stranding pattern 26 strand or less)
#18 AWG (stranding pattern 16 strand or less)
Push
3.
Connect
■ UL 467 Listed for grounding and bonding applications
Model
Color
Ports
Length
In. mm
Width
In.
mm
Height
In. mm
84
Red
2
.355
9.02 .434
11.02 .729
18.52
85
Orange
3
.355
9.02 .591
15.01 .729
18.52
86
Yellow
4
.355
9.02 .748
18.99 .729
18.52
87
Gray
5
.355
9.02 .907
23.03 .729
18.52
88
Blue
6 Stacked .607
15.42 .603
15.32 .729
18.52
90
Black
9.02 1.38
35.03 .717
18.21
8
.355
Quantity
Cat. No.
Box of 100
Jar of 300
Box of 1,000
Box of 5,000
Box of 100
Jar of 250
Box of 1,000
Box of 5,000
Box of 100
Jar of 200
Box of 1,000
Box of 5,000
Box of 100
Jar of 150
Box of 1,000
Box of 5,000
Box of 50
Jar of 100
Box of 1,000
Box of 5,000
Box of 50
Jar of 100
Box of 1,000
Box of 5,000
30-084
30-084J
30-184
30-684
30-085
30-085J
30-185
30-685
30-086
30-086J
30-186
30-686
30-087
30-087J
30-187
30-687
30-088
30-088J
30-188
30-688
30-090
30-090J
30-190
30-690
COPPER TO COPPER ONLY. Do not use on aluminum
Temperature rating: 105°C (221°F) maximum
600V maximum building wire, 1000V maximum signs or lighting fixtures
A-12
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
In-Sure™ Push-In Wire Connectors
■ NOW handles #12 AWG stranded
wire combinations
■ Specific wire listings
Solid:
#12 AWG – #18 AWG
Stranded: #12 AWG (19 strand or less)
#14 AWG (19 strand or less)
#16 AWG (26 strand or less)
#18 AWG (16 strand or less)
Perfect for residential, light commercial, lighting retrofit and pre-fab
wiring jobs
■ For use on insulation types AWM, TEW, TFN, TFFN, THHN, XHHW,
T90 Nylon or equivalent.
■ Perfect for residential, lighting retrofit, OEM lighting manufacturing,
prefabricated wiring systems and other OEM and branch circuit
wiring applications
■ Hardened stainless steel insert restricts pull-out, yet requires a very
low insertion force
■ Electrolytic tin-plated copper bus system reduces corrosion
■ Available in 2, 3 and 4 port models which are color coded for easy
identification (5, 6 and 8 port models available soon)
■ Every In-Sure connector allows for removal of the wire after the
connection has been established by firmly twisting the wire back
and forth while pulling on the connector
■ Each connector is UL Listed 94 V-2, CSA Certified and rated to
600V and 105°C
■ UL 467 Listed for grounding and bonding applications
Model
Color
No. of Ports
Quantity
Cat. No.
30-012
30-012J
30-612
12
Red
2
Box of 100
Jar of 300
Box of 5,000
13
Orange
3
Box of 100
Jar of 250
Box of 5,000
30-013
30-013J
30-613
14
Yellow
4
Box of 100
Jar of 200
Box of 3,500
30-014
30-014J
30-614
Integral test port for
voltage and continuity testing
Accepts any combination of 12-18
AWG solid and stranded copper
conductors
1-800-435-0705 for Customer Service
www.idealindustries.com
A-13
Wire Connectors
NEW
Term-a-Nut® Wire Connectors
Brass-alloy
terminal with
locking tabs
Wire Connectors
Term-a-Nut® Pigtail Connectors
■ Ultra-flexible 6-in. lead allows for easy positioning in outlet box —
reduces stress on device, wires and connection
■ Wide range of wire combinations – #18 through #12 AWG solid
or stranded conductors
Ultraflexible
lead
Brass
adapter
Phosphorbronze spring
■ Brass adapter for strong, conductive transition from spring to
lead wire
■ Brass-alloy terminals with locking tabs for fast, efficient device
connection
■ UL 486A and UL 486C Listed and tested to CSA standard
C22.2 #65 and C22.2 #188
■ Wire Range: Red/Green Shell – Min. 2 #18 AWG w/1 #14 AWG
Max. 4 #12 AWG
Shell Color
Wire Color
Terminal End
Quantity/Bag
Cat. No.
Red
White
#10 fork
25
30-3170
Red
White
#10 fork
10
30-3370
Red
Black
#10 fork
25
30-3171
Red
Black
#10 fork
10
30-3371
Red
White
Stripped end
25
30-3172
Red
Black
Stripped end
25
30-3173
Green
Green
#10 fork
25
30-3180
Green
Green
#10 fork
10
30-3380
MultiPak*
30-3181
*Includes 3 red shells w/white wire, 3 red shells w/black wire,
and 3 green shells w/green wire
A-14
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Grounding Connectors
and Accessories
Description
Quantity
Cat. No.
Bag of 25
30-3180
Bag of 25
30-3182
Bag of 10
30-3386
Bag of 25
30-3184
Box of 50
30-3390
Box of 50
30-3392
Pack of 50
30-3194
Pack of 100
30-3395
Bundle of 50
30-3496
Bundle of 50
30-3394
Bag of 25
30-3183
Bundle of 100
30-3284
Bag of 100
30-3294
Term-a-Nut grounding connector, #12 AWG
green w/#10 fork terminal
Term-a-Nut® grounding connector, #12 AWG
green w/#10 ring and ground screw
Term-a-Nut® grounding connector, #12 AWG
green w/#10 ring and ground screw, #12 AWG
green jumper w/#10 fork terminal
Stranded wire jumper, #12 AWG green w/#10 fork
terminal, #10 ring and ground screw, 7-3/4 in. long
Solid wire jumper, #14 AWG green
w/loop and ground screw, 6-1/2 in. long
Solid wire jumper, #12 AWG green
w/loop and ground screw, 8-1/4 in. long
Ground screw, thread-forming w/combination
hex, phillips, slotted and robertson tip
■ Term-a-Nut® grounding connectors address specific
requirements for grounding to steel outlet boxes
and wiring multiple devices
■ Solid and stranded pigtail lead wires are convenient
for stranded device grounding applications
■ Grounding screws offer a unique thread-forming
feature, plus combination hex, phillips, slotted and
robertson tip
■ UL Listed to UL486C and UL467 (grounding and
bonding)
Grounding clips – accepts 10, 12 and 14 AWG wire
Solid wire jumper, #12 AWG green
w/loop and ground screw, 8-1/4 in. long
Solid wire jumper, #12 AWG green
w/loop and ground screw, 10 in. long
Stranded wire jumper, #14 AWG green w/#10 fork
terminal, #10 ring and ground screw, 7-3/4 in. long
Stranded wire jumper, #12 AWG green w/#10 fork
terminal, #10 ring and ground screw, 7-3/4 in. long
Ground screw, thread-forming w/combination
hex, phillips, slotted and robertson tip
Term-a-Nut® Grounding Connector
Term-a-Nut® Grounding Connector
Connects grounding conductors to a
device’s grounding screw, connects
grounding conductors to the mounting box
and bonds the device to the box.
Bonds the box to the grounding
conductors.
Thread-forming
grounding screw
Ultra-flexible lead wire
Combo hex head
Twist-on wire
connector
30-3386
30-3182
Heavy-duty
brass terminal
Stranded bonding jumper
Twist-on wire
connector
Heavy-duty brass terminal
Term-a-Nut® Grounding Connector
Grounding Pigtail and Accessories
Connects multiple grounding conductors to
a device.
Connects the grounding screw of a device
directly to the device mounting box.
Ultra-flexible
lead wire
30-3194
30-3395
Ultra-flexible
lead wire
30-3180
Heavy-duty
brass terminal
30-3184
Twist-on wire
connector
Heavy-duty brass terminal
Thread-forming
grounding screw
Combo hex head
1-800-435-0705 for Customer Service
30-3390
30-3392
www.idealindustries.com
A-15
Wire Connectors
®
Term-a-Nut® Terminal Wire Connectors
High-quality
brass terminal
with locking tabs
■ No tools required – installs quickly without crimping – easily
removed for quick changes
■ Use with single or multiple wires – solid and/or stranded
#22 AWG #12 AWG
■ Highly conductive brass terminal and phosphor-bronze spring
for maximum conductivity and smooth performance
■ Tough, UL 94V-2 flame-retardant shell rated at 105°C (221°F)
Crimp Terminals
Phosphor-bronze
spring
■ UL 486A and UL 486C Listed and tested to CSA C22.2 #65
and C22.2 #188
Terminal
Configurations
Qty./Clamshell
Cat. No.
Qty./Clamshell
Cat. No.
#10 fork
10
30-2904
25
30-3004
#8 fork
10
30-2914
25
30-3014
.250 female disconnect
10
30-2906
25
30-3006
#10 ring
10
30-2912
25
30-3012
#8 ring
10
30-2910
25
30-3010
Assortment
40/kit*
30-3901
*Kit contains 8 each: 30-3004, 30-3014, 30-3006, 30-3012 and 30-3010.
Crimp Terminals-Rings, Forks, Disconnects and Splices
■ Butted seam-construction prevents splitting under maximum
pressure
■ Shouldered barrel insulation quickly positions terminal for
proper crimping
■ Internal barrel serrations grip wires tightly to resist pull-out and
reduce electrical resistance
■ Expanded insulation entry accomodates a wide variety of
insulation diameters and provides additional insulation support
■ Tin-plated brass construction for corrosion resistance
■ Color-coded insulation and wire range stamped on terminal for
easy identification
Vinyl Insulated Ring Terminals
Max.
Max.
Stud
Stud Wire
Wire
Size
Size Ins. Dia. Ins. Dia.
(Inches) (mm) (Inches) (mm)
Wire
Range
(AWG)
Wire
Range
(mm2)
22 – 18
0.5 – 1.0
6
8
10
1/4
3.7
4.3
5.3
6.4
.157
16 – 14
1.5 – 2.5
6
8
10
1/4
3.7
4.3
5.3
6.4
.177
4.0 – 6.0
8
10
1/4
5/16
3/8
4.3
5.3
6.4
8.4
10.5
12 – 10
.248
Dimensions
(Inches)
Dimensions
(mm)
L
W
E
F
L
W
E
F
Ctn.
Qty.
Cat.
No.
Ctn.
Qty.
Cat.
No.
4.0
.764
.819
.819
1.055
.260
.315
.315
.457
.394
.394
.394
.394
.248
.276
.276
.433
19.4
20.8
20.8
26.8
6.6
8.0
8.0
11.6
10.0
10.0
10.0
10.0
6.3
7.0
7.0
11.0
25
25
25
25
83-2121
83-2131
83-2141
83-2151
—
—
—
—
—
—
—
—
4.5
.764
.858
.858
1.055
.260
.335
.374
.472
.394
.394
.394
.394
.248
.307
.287
.433
19.4
21.8
21.8
26.8
6.6
8.5
9.5
12.0
10.0
10.0
10.0
10.0
6.3
7.8
7.3
11.0
25
25
25
25
83-2221
83-2231
83-2241
83-2251
—
—
1,000
—
—
—
84-2241
—
6.3
1.047
1.047
1.167
1.339
1.339
.374
.374
.472
.591
.591
.512
.512
.512
.512
.512
.358
.358
.413
.531
.531
26.6
26.6
29.5
34.0
34.0
9.5
9.5
12.0
15.0
15.0
13.0
13.0
13.0
13.0
13.0
9.1
9.1
10.5
13.5
13.5
25
25
25
25
25
83-2331
83-2341
83-2351
83-2361
83-2371
—
1,000
—
—
—
—
84-2341
—
—
—
75° C/600 Volts max.
A-16
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Dimensions
(Inches)*
W
E
Wire
Range
(AWG)
Wire
Range
(mm2)
Stud
Size
(Inches)
Stud
Size
(mm)
L
22 – 18
0.5 – 1.0
8
10
4.3
5.3
.622
.622
.315
.315
16 – 14
1.5 – 2.5
6
8
10
3.7
4.3
5.3
.567
.661
.661
12 – 10
4.0 – 6.0
8
10
1/4
4.3
5.3
6.4
8
8.0
10
1/4
5/16
3/8
6
14.0
4
22.0
Dimensions
(mm)**
W
E
F
Ctn.
Qty.
Cat.
No.
Ctn.
Qty.
Cat.
No.
4.8
4.8
7.0
7.0
25
25
83-0131
83-0141
—
—
—
—
6.6
8.5
9.5
4.8
4.8
4.8
6.3
7.8
7.3
25
25
25
83-0221
83-0231
83-0241
—
—
1,000
—
—
84-0241
19.6
19.6
22.5
9.5
9.5
12.0
6.0
6.0
6.0
9.1
9.1
10.5
25
25
25
83-0331
83-0341
83-0351
—
1,000
—
—
84-0341
—
.366
.366
.543
.543
23.8
23.8
29.8
29.8
12.0
12.0
15.0
15.0
8.5
8.5
8.5
8.5
9.3
9.3
13.8
13.8
25
25
25
25
83-0421
83-0431
83-0441
83-0451
—
—
—
—
—
—
—
—
.413
.413
.413
.413
.524
.524
.559
.559
29.8
29.8
32.5
32.5
12.0
12.0
16.0
16.0
10.5
10.5
10.5
10.5
13.3
13.3
14.2
14.2
20
20
20
20
83-0511
83-0521
83-0531
83-0541
—
—
—
—
—
—
—
—
.472
.472
.472
.531
.531
.531
33.5
33.5
33.5
16.5
16.5
16.5
12.0
12.0
12.0
13.5
13.5
13.5
20
20
20
83-0611
83-0621
83-0631
—
—
—
—
—
—
F
L
.189
.189
.276
.276
15.8
15.8
8,0
8.0
.260
.335
.374
.189
.189
.189
.248
.307
.287
14.4
16.8
16.8
.772
.772
.886
.374
.374
.472
.236
.236
.236
.358
.358
.413
5.3
6.4
8.4
10.5
.937
.937
1.161
1.161
.472
.472
.591
.591
.337
.337
.337
.337
10
1/4
5/16
3/8
5.3
6.4
8.4
10.5
1.173
1.173
1.280
1.280
.472
.472
.630
.630
1/4
5/16
3/8
6.4
8.4
10.5
1.319
1.319
1.319
.650
.650
.650
*Plus or minus .020 in.
**Plus or minus .50mm
Vinyl Insulated Spade Terminals
Max.
Max.
Stud
Stud Wire
Wire
Size
Size Ins. Dia. Ins. Dia.
(Inches) (mm) (Inches) (mm)
Dimensions
(Inches)
W
E
Wire
Range
(AWG)
Wire
Range
(mm2)
22 – 18
0.5 – 1.0
6
8
10
3.7
4.3
5.3
.157
4.0
.827
.827
.827
.252
.283
.374
16 – 14
1.5 – 2.5
6
8
10
3.7
4.3
5.3
.177
4.5
.827
.827
.827
12 – 10
4.0 – 6.0
6
8
10
1/4
3.7
4.3
5.3
6.4
.248
6.3
1.004
1.004
1.004
1.240
L
Dimensions
(mm)
W
E
F
Ctn.
Qty.
Cat.
No.
Ctn.
Qty.
Cat.
No.
10.0
10.0
10.0
6.5
6.5
6.5
25
25
25
83-7111
83-7121
83-7131
1,000
—
—
84-7111
—
—
6.0
7.2
9.3
10.0
10.0
10.0
6.5
6.5
6.5
25
25
25
83-7151
83-7161
83-7171
—
1,000
1,000
—
84-7161
84-7171
8.3
9.0
9.0
12.0
13.0
13.0
13.0
13.0
7.0
7.0
7.0
12.0
25
25
25
25
83-7201
83-7211
83-7221
83-7231
—
—
500
—
—
—
84-7221
—
F
L
.394
.394
.394
.256
.256
.256
21.0
21.0
21.0
6.4
7.2
9.5
.236
.283
.366
.394
.394
.394
.256
.256
.256
21.0
21.0
21.0
.327
.283
.283
.472
.512
.512
.512
.512
.276
.276
.276
.472
25.5
25.5
25.5
31.5
75° C/600 Volts max.
Insulated and Non-Insulated Terminals (#22 - #10 AWG) are UL Listed when used with IDEAL Crimp Tool #30-518 (Replacement Die #30-519).
Non-Insulated Terminals (#8 - #4 AWG) are UL Listed when used with IDEAL Crimp Tool #83-005 or 88-843.
Non-Insulated Disconnects and Vinyl Insulated Parallel Splices are not UL Listed; recommended IDEAL Crimp Tool #30-518.
1-800-435-0705 for Customer Service
www.idealindustries.com
A-17
Crimp Terminals
Non-Insulated Ring Terminals
Vinyl Insulated Snap Spade Terminals
Criimp Terminals/Disconnects
Wire
Range
(AWG)
Max.
Max.
Wire
Stud
Stud
Wire
Wire
Wire Range
Size
Size Ins. Dia. Ins. Dia.
(mm2)
(Inches) (mm) (Inches)
(mm)
Dimensions*
(Inches)
Dimensions
(mm)
L
W
E
F
L
W
E
F
Ctn.
Qty.
Cat. No.
.252
.283
.319
.394
.394
.394
.256
.256
.256
21.0
21.0
21.0
6.4
7.2
8.1
10.0
10.0
10.0
6.5
6.5
6.5
25
25
25
83-7011
83-7021
83-7031
22 – 18
0.5 – 1.0
6
8
10
3.7
4.3
5.3
.134
4.0
.827
.827
.827
16 – 14
1.5 – 2.5
6
8
10
3.7
4.3
5.3
.161
4.5
.827
.827
.827
.236
.319
.319
.394
.394
.394
.256
.256
.256
21.0
21.0
21.0
6.0
8.1
8.1
10.0
10.0
10.0
6.5
6.5
6.5
25
25
25
83-7051
83-7061
83-7071
12 – 10
4.0 – 6.0
8
10
1/4
4.3
5.3
6.4
.248
6.3
.992
.992
1.240
.327
.354
.472
.512
.512
.512
.276
.276
.472
25.2
25.2
31.5
8.3
9.0
12.0
13.0
13.0
13.0
7.0
7.0
12.0
25
25
25
83-7081
83-7091
83-7101
75° C/600 Volts max.
Non-Insulated Spade Terminals
Stud Size
(mm)
Dimensions
(Inches)
W
E
Wire Range
(AWG)
Wire Range
(mm2)
Stud Size
(Inches)
22 – 18
0.5 - 1.0
6
8
10
3.7
4.3
5.3
.630
.630
.630
.252
.283
.319
16 – 14
1.5 – 2.5
8
10
4.3
5.3
.630
.630
12 – 10
4.0 – 6.0
8
10
1/4
4.3
5.3
6.4
.728
.728
.965
L
Dimensions
(mm)
W
E
F
Ctn.
Qty.
Cat.
No.
Ctn.
Qty.
Cat.
No.
4.8
4.8
4.8
6.5
6.5
6.5
25
25
25
83-6111
83-6121
83-6131
—
—
—
—
7.2
9.3
4.8
4.8
6.5
6.5
25
25
83-6161
83-6171
—
1,000
—
84-6171
9.0
9.0
12.0
6.0
6.0
6.0
7.0
7.0
12.0
25
25
25
83-6211
83-6221
83-6231
—
—
—
—
—
—
F1
Ctn.
Qty.
Cat.
No.
F
L
.189
.189
.189
.256
.256
.256
16.0
16.0
16.0
6.4
7.2
8.1
.283
.366
.189
.189
.256
.256
16.0
16.0
.354
.354
.472
.236
.236
.236
.276
.276
.472
18.5
18.5
24.5
Vinyl Insulated Multi-Stack Disconnects
Wire
Range
(AWG)
Wire
Range
(mm2)
Tab
Size
(Inches)
Tab
Size
(mm)
Max.
Wire
Ins. Dia.
(Inches)
Max.
Wire
Ins. Dia.
(mm)
22 – 18
0.5 – 1.0
.250 x .032
6.35 x 0.8
.150
3.8
.886 .413 .260 .315 .250 .323
22.5 10.5
6.6
8.0 6.35
8.2
25
83-9611
16 – 14
1.5 – 2.5
.250 x .032
6.35 x 0.8
.185
4.7
.886 .413 .260 .315 .250 .323
22.5 10.5
6.6
8.0 6.35
8.2
25
83-9621
12 – 10
4.0 – 6.0
.250 x .032
6.35 x 0.8
.244
6.2
.945 .512 .260 .315 .250 .323
22.5 13.0
6.6
8.0 6.35
8.2
25
83-9631
L
Dimensions
(Inches)
B
W
F W1
F1
L
B
Dimensions
(mm)
W
F W1
75° C/300 Volts max.
A-18
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Wire
Range
(AWG)
Wire
Range
(mm2)
Tab
Size
(Inches)
Tab
Size
(mm)
Max.
Wire
Ins. Dia.
(Inches)
Max.
Wire
Ins. Dia.
(mm)
22 – 18
0.5 – 1.0
.110 x .020
2.8 x 0.5
.150
3.8
.728 .413 .126 .256 18.5
10.5
16 – 14
1.5 – 2.5
.110 x .020
2.8 x 0.5
.185
4.7
.748 .413 .126 .256 19.0
10.5
22 – 18
0.5 – 1.0
.187 x .020
4.75 x 0.5
.150
3.8
.764 .413 .197 .252 19.4
16 – 14
1.5 – 2.5
.187 x .020
4.75 x 0.5
.185
4.7
.764 .413 .197 .252 19.4
22 – 18
0.5 – 1.0
.250 x .032
6.35 x 0.8
.150
3.8
16 – 14
1.5 – 2.5
.250 x .032
6.35 x 0.8
.185
14 – 12
2.5 – 4.0
.250 x .032
6.35 x 0.8
.244
12 – 10
4.0 – 6.0
.250 x .032
6.35 x 0.8
.244
Dimensions
(Inches)
B
W
Dimensions
(mm)
B
W
L
Ctn.
Qty.
Cat.
No.
Ctn.
Qty.
Cat.
No.
3.2
6.5
25
83-9511
—
—
3.2
6.5
25
83-9521
—
—
10.5
5.0
6.4
25
83-9541
—
—
10.5
5.0
6.4
25
83-9551
—
—
.819 .413 .260 .287 20.8
10.5
6.6
7.3
25
83-9571
—
—
4.7
.819 .413 .260 .287 20.8
10.5
6.6
7.3
25
83-9581
500
84-9581
6.2
.917 .512 .260 .287 23.3
13.0
6.6
7.3
25
83-9591
—
—
6.2
.917 .512 .260 .287 23.3
13.0
6.6
7.3
25
83-9601
—
—
Dimensions
(mm)
B
W
F
Ctn.
Qty.
Cat. No.
L
F
L
75° C/300 Volts max.
Vinyl Insulated Male Disconnects
Wire
Wire
Range Wire Range Tab Size
(AWG)
(mm2)
(Inches)
Max.
Max.
Wire
Wire
Tab Size Ins. Dia. Ins. Dia.
(mm) (Inches) (mm)
Dimensions
(Inches)
B
W
L
F
L
22 – 18
0.5 – 1.0
.250 x .032 6.35 x 0.8
.150
3.8
.858
.413
.250
.303
21.8
10.5
6.35
7.7
25
83-9971
16 – 14
1.5 – 2.5
.250 x .032 6.35 x 0.8
.185
4.7
.858
.413
.250
.303
21.8
10.5
6.35
7.7
25
83-9981
12 – 10
4.0 – 6.0
.250 x .032 6.35 x 0.8
.244
6.2
.945
.512
.250
.303
24.0
13.0
6.35
7.7
25
83-9991
75° C/300 Volts max.
Non-Insulated Female Disconnects
Dimensions
(Inches)
B
W
Dimensions
(mm)
B
W
Wire
Range
(AWG)
Wire
Range
(mm2)
Tab
Size
(Inches)
Tab
Size
(mm)
L
F
L
F
Ctn. Qty.
Cat. No.
22 – 18
0.5 – 1.0
.110 x .020
2.8 x 0.5
.630
.189
.126
.256
16.0
4.8
3.2
6.5
25
83-9411
16 – 14
1.5 – 2.5
.110 x .020
2.8 x 0.5
.630
.189
.126
.256
16.0
4.8
3.2
6.5
25
83-9421
22 – 18
0.5 – 1.25
.187 x .020
4.75 x 0.5
.630
.189
.197
.252
16.0
4.8
5.0
6.4
25
83-9441
16 – 14
1.5 – 2.5
.187 x .020
4.75 x 0.5
.630
.189
.197
.252
16.0
4.8
5.0
6.4
25
83-9451
22 – 18
0.5 – 1.25
.250 x .032
6.35 x 0.8
.630
.189
.260
.287
16.0
4.8
6.6
7.3
25
83-9471
16 – 14
1.5 – 2.5
.250 x .032
6.35 x 0.8
.630
.189
.260
.287
16.0
4.8
6.6
7.3
25
83-9481
12 – 10
4.0 – 6.0
.250 x .032
6.35 x 0.8
.728
.236
.260
.287
18.5
6.0
6.6
7.3
25
83-9501
1-800-435-0705 for Customer Service
www.idealindustries.com
A-19
Disconnects
Vinyl Insulated Female Disconnects
Nylon Fully-Insulated Female Disconnects
Disconnects
Wire
Range
(AWG)
Wire
Range
(mm2)
Tab
Size
(Inches)
Tab
Size
(mm)
Max.
Wire
Ins. Dia.
(Inches)
Max.
Wire
Ins. Dia.
(mm)
22 – 18
0.5 – 1.0
.250 x .032
6.35 x 0.8
.150
3.8
.866 .433 .260 .287 22.0
11.0
16 – 14
1.5 – 2.5
.250 x .032
6.35 x 0.8
.185
4.7
.866 .433 .260 .287 22.0
12 – 10
4.0 – 6.0
.250 x .032
6.35 x 0.8
.244
6.2
.945 .512 .260 .287 24.0
L
Dimensions
(Inches)
B
W
F
L
Dimensions
(mm)
B
W
L
Ctn.
Qty.
Cat.
No.
Ctn.
Qty.
Cat.
No.
6.6
7.3
25
83-9771
—
—
11.0
6.6
7.3
25
83-9781
1,000
84-9781
13.0
6.6
7.3
25
83-9791
500
84-9791
105° C/300 Volts max.
Nylon Fully-Insulated Male Disconnects
Wire
Wire
Range Wire Range Tab Size
(AWG)
(mm2)
(Inches)
Max.
Max.
Wire
Wire
Tab Size Ins. Dia. Ins. Dia.
(mm) (Inches) (mm)
L
Dimensions
(Inches)
B
W
F
L
Dimensions
(mm)
B
W
F
Ctn.
Qty.
Cat. No.
22 – 18
0.5 – 1.0
.250 x .032 6.35 x 0.8
.150
3.8
.906
.433
.250
.303
23.0
11.0
6.35
7.7
25
83-9911
16 – 14
1.5 – 2.5
.250 x .032 6.35 x 0.8
.185
4.7
.945
.433
.250
.303
24.0
11.0
6.35
7.7
25
83-9921
12 – 10
4.0 – 6.0
.250 x .032 6.35 x 0.8
.244
6.2
.984
.512
.250
.303
25.0
13.0
6.35
7.7
25
83-9931
105° C/300 Volts max.
Vinyl Insulated Bullet Disconnects
Dimensions
(Inches)
B
W
Dimensions
(mm)
B
W
Wire
Range
(AWG)
Wire
Range
(mm2)
Max. Wire
Ins. Dia.
(Inches)
Max. Wire
Ins. Dia.
(mm)
L
F
L
F
Ctn. Qty.
Cat. No.
22 – 18
0.5 – 1.0
.150
3.8
.846
.413
.157
.335
21.5
10.5
4.0
8.5
25
83-8001
16 – 14
1.5 – 2.5
.185
4.7
.846
.413
.157
.335
21.5
10.5
4.0
8.5
25
83-8011
75° C/300 Volts max.
Vinyl Fully-Insulated Receptacle Disconnects
Dimensions
(Inches)
B
W
Dimensions
(mm)
B
W
Wire
Range
(AWG)
Wire
Range
(mm2)
Max. Wire
Ins. Dia.
(Inches)
Max. Wire
Ins. Dia.
(mm)
L
F
L
F
Ctn. Qty.
Cat. No.
22 – 18
0.5 – 1.0
.150
3.8
.917
.413
.153
.287
23.3
10.5
3.9
7.3
25
83-8101
16 – 14
1.5 – 2.5
.185
4.7
.917
.413
.153
.287
23.3
10.5
3.9
7.3
25
83-8111
75° C/300 Volts max.
A-20
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Non-Insulated Flag Female Disconnect
Wire
Range
(mm2)
Tab
Size
(Inches)
Tab
Size
(mm)
L
16 – 14
1.5 – 2.5
.250 x .032
6.35 x 0.8
.551
Dimensions
(Inches)
B
W
.291
.260
F
L
299
14.0
Dimensions
(mm)
B
W
7.4
6.6
F
Ctn. Qty.
Cat. No.
7.6
25
83-9401
Disconnects/Splices
Wire
Range
(AWG)
Disconnect Adapter – Male to Female (2-1)
Dimensions
(Inches)
Dimensions
(mm)
Tab Size
(Inches)
Tab Size
(mm2)
L
W
L
W
Ctn. Qty.
Cat. No.
.250 x .032
6.35 x 0.8
.551
.260
14.0
6.6
25
83-9801
Non-Insulated Butt Splices
Dimensions
(Inches)
Dimensions
(mm)
Wire
Range
(AWG)
Wire Range
(mm2)
L
D
L
D
Ctn. Qty.
Cat. No.
Ctn. Qty.
Cat. No.
22 – 18
0.5 – 1.0
.591
.130
15.0
3.3
25
83-9001
—
—
16 – 14
1.5 – 2.5
.591
.154
15.0
3.9
25
83-9011
—
—
12 – 10
4.0 – 6.0
.591
.213
15.0
5.4
25
83-9021
500
84-9021
8
8.0
.827
.276
21.0
7.0
25
83-9031
250
84-9031
6
14.0
1.024
.350
26.0
8.9
20
83-9041
—
—
4
22.0
1.142
.445
29.0
11.3
20
83-9051
—
—
Cat. No.
Non-Insulated Parallel Splices
Dimensions
(Inches)
Dimensions
(mm)
Wire
Range
(AWG)
Wire Range
(mm2)
L
D
L
D
Ctn. Qty.
Cat. No.
Ctn. Qty.
22 – 18
0.5 – 1.0
.315
.130
8.0
3.3
25
83-9071
—
—
16 – 14
1.5 – 2.5
.315
.154
8.0
3.9
25
83-9081
1,000
84-9081
12 – 10
4.0 – 6.0
.335
.213
8.5
5.4
25
83-9091
—
—
1-800-435-0705 for Customer Service
www.idealindustries.com
A-21
Vinyl Insulated Butt Splices
Wire Range
(mm2)
Max.
Wire Ins.
Dia.
(Inches)
Max.
Wire Ins.
Dia.
(Inches)
22 – 18
0.5 – 1.25
.157
4.0
.986
16 – 14
1.5 – 2.5
.177
4.5
.986
12 – 10
4.0 – 6.0
.248
6.3
1.043
Wire
Range
(AWG)
Dimensions
(Inches)
L
D
Dimensions
(mm)
L
D
Ctn. Qty.
Cat. No.
Ctn. Qty.
Cat. No.
.067
24.6
1.7
25
83-9281
1,000
84-9281
.091
24.6
2.3
25
83-9291
1,000
84-9291
.134
26.5
3.4
25
83-9301
500
84-9301
Splices
75° C/600 Volts max.
Vinyl Insulated Parallel Splices
Dimensions
(Inches)
Dimensions
(mm)
Wire
Range
(AWG)
Wire
Range
(mm2)
Max. Wire
Ins. Dia.
(Inches)
Max. Wire
Ins. Dia.
(mm)
L
W
L
W
Ctn. Qty.
Cat. No.
22 – 18
0.5 – 1.0
.157
4.0
.512
.067
13.0
1.7
25
83-9351
16 – 14
1.5 – 2.5
.177
4.5
.512
.091
13.0
2.3
25
83-9361
12 – 10
4.0 – 6.0
.248
6.3
.591
.134
15.0
3.4
25
83-9371
75° C/ 600 Volts max.
Tap Splice Connectors
Dimensions
(Inches)
Dimensions
(mm)
Wire
Range
(AWG)
Wire
Range
(mm2)
Color
L
W
L
W
Ctn. Qty.
Cat. No.
22 – 18
0.5 – 1.0
Red
1.063
.787
27.0
20.0
25
83-3261
16 – 14
1.5 – 2.5
Blue
1.063
.787
27.0
20.0
25
83-3271
12 – 10
4.0 – 6.0
Yellow
1.358
.807
34.5
20.5
25
83-3281
105°C/ 600 Volts max.
A-22
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Terminal Strips
■
Heavy-duty, corrosion-resistant screws, surface
plates and optional hardware
■ Accessory hardware provides a variety of
termination options
■ Available cover helps prevent contact with live terminals
■
89-200 Series Terminal Strips
89-300 Series Terminal Strips
30A/600V* UL Listed, CSA Certified
15A/250V** UL Listed, 15A/150V** CSA Certified
■ .562 in. (14.28mm) center spacing
■ .375 in. (9.52mm) center spacing
■ Accepts wire sizes from 22 through 10 AWG Cu
■ Accepts wire sizes from 22 through 14 AWG Cu
■ #8-32 philslot, zinc-plated steel
terminal screws
■ #6-32 philslot, zinc-plated steel
terminal screws
Dimensions
(Inches)
Cat. No.
A
B
Cat. No.
89-202
2
1.40
1.12
89-302
2.25
89-203
4
2.16
1.88
89-304
2.81
89-204
6
2.90
2.62
89-306
89-206
8
3.66
3.38
89-308
5.06
89-208
10
4.40
4.12
89-310
6.19
89-210
12
5.16
4.88
89-312
A
B
2
2.13
1.69
3
2.69
4
3.25
6
4.37
3.94
8
5.50
10
6.62
7.75
Dimensions
(Inches)
No. of
Poles
No. of
Poles
12
7.31
89-212
**Max. electrical rating 15A/125V when used with
optional quick-connects
*Max. electrical rating 30A/250V when used
with optional quick-connects
1-800-435-0705 for Customer Service
www.idealindustries.com
A-23
Terminal Strips
Rugged polyester thermoplastic base
(UL Rated 94V-O)
■ Rated at -40°F (-40°C) to 260°F (130°C)
■ UL E62622 Listed and CSA LR15364 Certified
89-400 Series Terminal Strips
20A/250V UL Listed, CSA Certified
89-500 Series Terminal Strips
60A/600V* UL Listed, CSA Certified
■ .437 in. (11.10mm) center spacing
■ Available shorting-block style
■ Accepts wire sizes from 22 through 12 AWG Cu
■ .625 in. (15.88mm) center spacing
■ #6-32 philslot, zinc-plated steel terminal screws
■ Accepts wire sizes from 22 through 6 AWG Cu
■ #10-32 slotted, nickel plated brass terminal screws
Terminal Strips
Dimensions
(Inches)
No. of
Poles
A
B
2
1.63
4
2.51
6
A-24
Dimensions
(Inches)
Cat. No.
No. of
Poles
A
B
Standard Block
Cat. No.
Shorting Block
Cat. No.
1.31
89-402
4
3.75
2.87
89-504
89-505
2.18
89-404
6
5.00
4.12
89-506
89-507
3.38
3.06
89-406
8
6.25
5.37
89-508
89-509
12
8.75
7.87
89-512
89-513
8
4.25
3.93
89-408
10
5.13
4.81
89-410
12
6.00
5.68
89-412
www.idealindustries.com
*Max. electrical rating 60A/600V achieved only when used
with #6 AWG copper wire crimped to ring terminal
1-800-435-0705 for Customer Service
Wire Termination
Covers
No. of
Circuits
For Use With Terminal Strip Series
89-200
89-300
Clear
Clear
Cat. No.
Cat. No.
89-334
89-400
Clear
Cat. No.
89-500
Clear
Cat. No.
89-434
—
2
89-233
3
89-234
—
—
—
4
89-235
89-335
89-435
89-514
6
89-236
89-336
89-436
89-516
8
89-237
89-337
89-437
89-518
10
89-238
89-338
89-438
—
12
89-239
89-339
89-439
89-520
Terminal Strips
■ Helps prevent contact with live terminals
Quick Connects
■ Allows fast, flexible circuit changes
Flat - Flat
Flat - None
For Use With
Terminal Strip
Series
89-300
Tab Size
(Inches)
.187 x .020
Qty
10 pcs.
Flat - None
Cat. No.
89-314
Flat - Flat
Cat. No.
89-317
89-200 & 89-400 .250 x .031
10 pcs.
89-414
89-417
Jumpers
■ Provides easy connection of
multiple circuits
Flat Slip-on
Over Barrier
Slip-on
Flat 12-Circuit
For Use With
Terminal Strip
Series
Center Spacing
(Inches)
89-200
.562
89-300
.375
89-400
.437
89-500
.625
1-800-435-0705 for Customer Service
Qty.
10 pcs.
100 pcs.
Flat
Slip-on
Cat. No.
89-229
89-230
Over Barrier
Slip-on
Cat. No.
89-224
—
Flat
12-Circuit
Cat. No.
—
—
10 pcs.
100 pcs.
89-323
89-330
89-324
—
—
—
10 pcs.
89-423
89-424
—
100 pcs.
89-430
—
—
2 pcs.
—
—
89-525
www.idealindustries.com
A-25
Wire Connectors
Wire Termination
1-800-435-0705 for Customer Service
www.idealindustries.com
1
Barrier Strips
Terminal Strips
■
Recessed screws and tubular contacts provide
added safety and help prevent short circuits
■
Tubular contacts connect stripped, un-terminated
solid or stranded wire directly to each contact
■
Integrated wire protectors prevent twisting and
breakage of stranded wire during connection
■
Modular 12-circuit design can be cut into smaller
sections, or stacked end-to-end
■
Rugged nylon 66 housing, UL 94V2
■
Operating temperature rated at 221°F (105°C)
Barrier Strips
Electrical
Ratings
20A/600V UL
10A/400V CSA
30A/600V UL
20A/400V CSA
Wire
Range
(AWG)
22 - 12
20 - 18
22 - 10
18 - 14
35A/600V UL/CUL
50A/600V UL/CUL
No. of
Circuits
Model
No.
A
Dimensions
(Inches)
B
C
D
E
F*
A
Dimensions
(mm)
B
C
D
E
F**
Cat. No.
12
PA8DS 3.787
0.669
0.570
0.315
0.114
0.110
96.2
17.0
14.5
8.0
2.9
2.8
89-608
12
PA10DS 4.626
0.795
0.670
0.394
0.142
0.134 117.0
20.2
17.0
10.0
3.6
3.4
89-610
22 - 10
12
PA12DS 5.540
0.937
0.748
0.472
0.154
0.154 140.7
23.8
19.0
12.0
3.9
3.9
89-612
20 - 8
12
PA14DS 6.220
1.008
0.992
0.531
0.173
0.189 158.0
25.6
25.2
13.5
4.4
4.8
89-614
*Plus or minus .004 in.
**Plus or minus 0.1mm
A-26
www.idealindustries.com
1-800-435-0705 for Customer Service
Crimp Connectors
Wrap-Cap® Insulators
■ Designed for making fast, permanent, pressure-type connections
■ Provide high dielectric and physical protection for UL Listed,
non-insulated pressure-type wire connectors
■ Long, zinc-plated steel sleeves maximize contact area
with conductors
■ Cap and loop design eliminates need for tape
■ Solid copper sleeves require less crimping pressure and resist
corrosion in harsh environments
■ Unique design completely covers splice — insulates both
around and between wires
■ Will not vibrate loose when securely crimped
■ Reusable and easy to install
■ Steel crimp connectors are UL 486C Listed and CSA 22.2 #188
Certified; comply with Federal Specification W-S-610E. Copper
crimp connector is UL 486C Listed only
■ UL Listed and CSA Certified for 600V maximum building wiring
(1,000V maximum for fixtures and signs); temperature rated at
75°C (167°F) maximum
Steel Crimp Connectors
Model
Wire Combination
Range
410
600V
No. 18 thru 10 AWG
Min. 1 No. 14 & 1 No. 18
Max. 2 No. 10 & 2 No. 14
411
600V
No. 18 thru 8 AWG
Min. 3 No. 12
Max. 4 No. 10
412
600V
No. 18 thru 4 AWG
Min. 1 No. 14 & 1 No. 16
Max. 2 No. 8 & 1 No. 6
Model
Description
Quantity
Box of 100
Cat. No.
30-410
Carton of 1,000
30-510
Keg of 10,000
30-610
Box of 40
30-401
Box of 50
30-411
Carton of 1,000
30-511
Box of 20
30-402
Box of 50
30-412
Model
Carton of 1,000
30-512
415
417
415
Insulator for Model 408
& 410 sleeves
417
Insulator for Model 411
& 412 sleeves
Quantity
Cat. No.
Box of 20
Box of 100
Carton of 1,000
Keg of 10,000
Box of 10
Box of 50
Carton of 1,000
30-405
30-415
30-515
30-615
30-407
30-417
30-517
Dimensions (Inches)
A
B
C
D
1/2
5/8
23/32
1-13/64
11/16
3/4
3/4
1-25/32
Dimensions (Inches)
Model
A
B
410 Steel
3/8
13/64
411 Steel
5/8
1/4
412 Steel
51/64
19/64
IDEAL hand tools U.L. listed for Model 410, 411, 412.
Crimps: 30-420, 30-425, 30-429, 30-430.
1-800-435-0705 for Customer Service
www.idealindustries.com
A-27
Wire Connectors
Wire Termination
Pre-Insulated
Crimp Connectors
Buchanan Construction Products
Splice Cap Insulators
■ Three models cover a wide
range of wire combinations
from 22 AWG stranded
through 8 AWG stranded
■ Convenient, safe and fast installation
■ Snap-on nylon construction
■ Rated at 105°C (221°F) —
600V (1,000V for
fixtures and signs)
■ Compact design fits easily
into tight locations
Wire Connectors
■ Flared skirt protects against
turned–back strands
■ Beveled opening eases wire entry
Model
Wire Combination Range
Quantity
48
600V*
Min. 2 No. 22
Max. 1 No. 14 w/2 No. 18
Cat. No.
For Connector Model
1,000
30-146
2006S & 2008S
10,000
30-646
600V*
2 #22
Max. 1 No. 12 & 2 No. 18
1,000
30-147
49
10,000
30-647
600V*
Min. 4 No. 16
Max. 1 No. 12 w/4 No. 14
1,000
30-148
NC-8
5,000
30-648
2011S
Quantity
Box of 100
Bag of 1,000
Box of 50
Bag 500
Cat. No.
2007
2007B
2014
2014B
*1,000V maximum in fixtures and signs
Buchanan Construction Products
Splice Cap Crimp Connectors
Buchanan Construction Products
Four-Way Crimp Tool
■ Designed for making fast,
permanent, pressure-type
connections
■ Patented design ensures
even compression and
reliable connections
■ Solid copper sleeves
require less
crimping pressure
■ Spring-loaded,
cam-actuated plungers
■ Fingertip adjustment for
different connector sizes
■ Resist corrosion in
harsh environments
■ Tin-plated steel sleeves
also available
■ UL 486C Listed and CSA 22.2 #188 Certified;
comply with Federal Specification W-S-61D
Wire Combination
Range
Model
Copper Crimp
Connector
600V*
No.18 thru 10 AWG
Min. 2 No. 18
Max. 4 No. 12
Copper Crimp
Connector
600V*
No. 14 thru 4 AWG
Min. 2 No. 10
Max. 2 No. 6
Steel Crimp
Connector
600V*
No. 18 thru 10 AWG
Min. 2 No. 18
Max. 4 No. 12
Description
Quantity
Cat. No.
Box of 100
2006S
Bag of 1,000
2006SB
Box of 50
2011S
Bag of 500
2011SB
Box of 100
Bag of 1,000
Four-Way Crimp Tool
Cat. No.
C-24
2008S
2008SB
*1,000V maximum in fixtures and signs
A-28
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Set-Screw Wire Connectors
Set-Screw Holder
■ Convenient tool for holding and
tightening set-screw connectors
■ Eliminates need for restripping wire each time connection is disturbed
For Connector Models
Cat. No.
11 & 22
K-2422
Noalox® Anti-Oxidant
■ Solid brass sleeves in three sizes handle 18 through 12 AWG wires
■ Set-screw easily and securely applies maximum compression to
conductors to ensure a vibration-resistant splice
■ Permits fast visual inspection of splice
■ Tough, flame-retardant shell rated at 150°C (302°F)
■ UL 486C Listed and CSA 22.2 #188 certified; comply with Federal
Specification W-S-610E
Model
10
11
22
Wire Combination
Range
300V
No. 22 thru 16 AWG
Min. 1 No. 20 w/1 No. 22
Max. 2 No. 14 w/1 No. 16
600V
No. 22 thru 14 AWG
Min. 1 No. 14 w/1 No. 20
Max. 3 No. 14 w/2 No. 18
600V
No. 20 thru 10 AWG
Min. 1 No. 16 w/3 No. 18
Max. 2 No. 10 w/1 No. 12
Quantity
Cat. No.
Box of 100
30-210
Carton of 1,000
30-310
Box of 100
30-211
Carton of 1,000
30-311
Box of 100
30-222
Carton of 1,000
30-322
■ Anti-oxidant and anti-seizing compound improves efficiency
and service life of aluminum electrical applications
■ Suspended zinc particles penetrate and cut aluminum oxide
■ Provides additional inner-strand and inner-conductor current
paths for improved conductivity and cooler connections
■ Carrier material excludes air to prevent further oxidation
Dimensions (Inches)
Insert
Model
A
Shell
B
C
D
E
10
1/8
5/16
1/2
19/64
45/64
11
3/16
3/8
33/64
13/32
63/64
22
1/4
1/2
11/16
13/32
1-1/64
1-800-435-0705 for Customer Service
■ For use with all types of pressure-type wire connectors
including screw-on, tap, service entrance and split-bolt
■ Reduces galling and seizing on aluminum conduit joints —
promotes good ground continuity
Description
Cat. No.
1/2-oz. Tube
30-024
4-oz. Squeeze bottle
30-026
8-oz. Squeeze bottle
30-030
8-oz. Brush cap
30-031
1-gal. Bucket
30-032
5-gal. Bucket
30-040
www.idealindustries.com
A-29
Wire Connectors
■ Accepts IDEAL
Models 11 and 22
set-screw connectors
Powr-Connect™ Mechanical Lugs
■ Chamfered entry for faster, more reliable connections
■ Can be used through 8,000V if installed in
accordance with National Electric Code Section
310-6 (UL Green Book)
■ Uniform plating resists corrosion, reduces contact
resistance and provides maximum conductivity
■ UL 486B Listed for dual-rated connectors —
UL 486A Listed for copper connectors
■ UL Listed at 600V — acceptable for use through 2,000V
Mechanical Lugs
■ Meets ANSI C119.4 requirements
Dual-Rated (Al/Cu) Single-Barrel Connectors
■ Electro tin-plated, high-strength aluminum alloy construction
■ UL 486B Listed AL9CU
Wire range and
stud size
identification
Tang and
mounting hole
Chamfered
wire entry
Slotted screw
Functional wire stop
Tang and
mounting hole
Hex socket
screw
Wire range
and stud size
identification
Chamfered
wire entry
Hex socket screw
Ecliptical barrel
shape permits
selected range
of two
conductors
under one
screw
Tang and
mounting
hole
Wire
range and
stud size
identification
Stud
Size (In.)
Cat.
No.
1-1/16
3/8
1/2
1/4
87-002
LA-2
LA-1/0
2 – 14 AWG
1/0 – 14 AWG
1-5/32
1-15/32
1/2
5/8
9/16
25/32
1/4
1/4
87-005
87-007
LA-1/0*
LA-2/0
LA-2/0*
1/0 – 14 AWG
2/0 – 14 AWG
2/0 – 14 AWG
1-15/32
1-15/32
1-15/32
5/8
5/8
5/8
25/32
25/32
23/32
3/8
1/4
3/5
87-008
87-009
87-010
LA-250
LA-250*
LA-300
250 KCMIL – 6 AWG
250 KCMIL – 6 AWG
300 KCMIL – 6 AWG
2
2
2
1
1
1
1-1/8
1-1/8
1-1/8
5/16
3/8
5/16
87-011
87-012
87-013
LA-300*
LA-350
LA-350*
300 KCMIL – 6 AWG
350 KCMIL – 6 AWG
350 KCMIL – 6 AWG
2
2-1/4
2-1/4
1
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
3/8
3/8
1/2
87-014
87-015
87-016
LA-500
LA-500*
LA-600
500 KCMIL – 4 AWG
500 KCMIL – 4 AWG
600 KCMIL – 2 AWG
2-13/16
2-13/16
3-3/16
1-1/4
1-1/2
1-1/2
1-9/16
1-9/16
1-9/16
3/8
1/2
3/8
87-017
87-018
87-019
LA-800
LA-1000
800 – 300 KCMIL
1,000 – 350 KCMIL
3-1/2
3-1/2
1-3/4
1-3/4
1-15/16
1-15/16
5/8
5/8
87-021
87-023
LA-630
600 KCMIL – 4 AWG (1)
250 KCMIL – 1/0 AWG (2)
2-13/16
1-3/8
1-13/16
3/8
87-025
600 KCMIL – 2 AWG
800 – 00 KCMIL
1,000 – 500 KCMIL
5-5/16
6-3/16
6-3/16
1-1/2
1-3/4
1-3/4
1-1/2
1-7/8
1-7/8
1/2
1/2
1/2
87-027
87-029
87-031
L1D2-600
L1D2-800
L1D2-1000
*Larger mounting hole
Tang and
mounting
holes
Wire range and
stud size
identification
A-30
1-3/4 in.
Dimensions (Inches)
L
W
H
LA-50-1
6 – 14 AWG
Narrow type – special mounting requirements
Chamfered
wire entry
Hex
socket
screws
Wire
Range
Model
Chamfered
wire entry
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Dual-Rated (Al/Cu) Panel-Board Connectors
■ Electro tin-plated, high-strength aluminum alloy construction
■ UL 486B Listed AL9CU
Flat
bottom ensures
good mounting
contact
Dimensions (Inches)
L
W
H
Model
Wire
Range
Stud
Size (In.)
Cat.
No.
PV2-600
600 KCMIL – 2 AWG
4-29/32
1-1/2
3
3/8
87-126
PV2-750
750 KCMIL – 1/0 AWG
4-29/32
1-9/16
3
3/8
87-129
PV3-600
600 KCMIL – 2 AWG
4-29/32
2-1/2
3
3/8
87-132
PV3-750
750 KCMIL – 1/0 AWG
4-29/32 2-27/32
3
3/8
87-135
PV4-600
600 KCMIL – 2 AWG
4-29/32
3
3/8
87-138
PV4-750
750 KCMIL – 3/0 AWG
3
3/8
87-141
Chamfered
wire entry
Hex socket
screws
Wire
stop
Wire range
and stud size
identification
2-1/2
4-29/32 2-27/32
Dual-Rated (Al/Cu) Splicer Reducers
■ Electro tin-plated, high-strength aluminum alloy construction
■ UL 486B Listed AL9CU
Slotted screws
Chamfered
wire entry
Solid center
barrier
Rounded bottom
facilitates tapping
Hex socket screws
Chamfered
wire entry
Solid center
barrier
Dimensions (Inches)
L
W
H
Model
Wire
Range
Stud
Size (In.)
Cat.
No.
SR-2*
SR-1/0*
2 – 14 AWG
1/0 – 14 AWG
1-3/8
1-29/32
1/2
3/4
9/16
3/4
5/8
7/8
87-143
87-144
SR-250
SR-350
SR-500
250 KCMIL – 6 AWG
350 KCMIL – 6 AWG
500 KCMIL – 3/0 AWG
3-15/16
4-3/16
5
1
1-1/8
1-3/8
1-1/8
1-3/16
1-1/2
1-15/16
2-1/16
2-7/16
87-145
87-146
87-147
SR-750
750 – 250 KCMIL
6-1/4
1-5/8
1-3/4
3-1/16
87-148
*Slotted screws
Rounded bottom
facilitates tapping
1-800-435-0705 for Customer Service
www.idealindustries.com
A-31
Mechanical Lugs
Tang and two
mounting holes
Dual-Rated (Al/Cu) Two-Barrel Connectors
■ Electro tin-plated, high-strength aluminum alloy construction
■ UL 486B Listed AL9CU
Mechanical Lugs
Wire range
and stud size
identification
Two hex
socket screws
Tang
and mounting
hole
Chamfered
wire entry
Wire stops
Hex socket
screws
Dimensions (Inches)
L
W
H
Model
Wire
Range
Stud
Size (In.)
Cat.
No.
L2A1-1/0
L2A1-2/0
L2A1-250
1/0 – 14 AWG (2)
2/0 – 14 AWG (2)
250 KCMIL – 6 AWG (2)
1-15/32
1-15/32
2-9/16
1-1/8
1-1/4
1-5/8
25/32
25/32
1-3/16
1/4
1/4
3/8
87-040
87-042
87-044
L2A1-350
L2A1-600
350 KCMIL – 6 AWG (2)
600 KCMIL – 2 AWG (2)
2-7/8
3-3/16
1-15/16
2-13/32
1-1/4
1-9/16
1/2
1/2
87-046
87-048
L2D2-350
L2D2-600
350 KCMIL – 6 AWG (2)
600 KCMIL – 2 AWG (2)
4-1/4
5-5/16
2-5/16
2-3/4
1-3/8
1-1/2
1/2
1/2
87-055
87-060
Stud
Size (In.)
Cat.
No.
1-3/4 in.
Tang and two
mounting holes
NEMA standard
bolt holes
Chamfered
wire entry
Dual-Rated (Al/Cu) Switch-Gear Connectors
■ Electro tin-plated, high-strength aluminum alloy construction
■ UL 486B Listed AL9CU
Hex socket
screw
Mounting
holes
1-1/2 in.
Chamfered
wire entry
1-1/2 in.
Dimensions (Inches)
L
W
H
Model
Wire
Range
SG-350
350 KCMIL – 4 AWG
4-11/16
1-1/4
1-9/16
1/2
87-102
SG-500
500 KCMIL – 400 KCMIL
4-11/16
1-1/4
1-9/16
1/2
87-105
SG-800
800 – 300 KCMIL
6-3/16
1-1/2
1-7/8
1/2
87-110
SG-1000
1,000 – 350 KCMIL
6-3/16
1-5/8
1-7/8
1/2
87-115
Hex socket
screws
Mounting
holes
Chamfered
wire entry
A-32
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Dual-Rated (Al/Cu) Connectors with Multiple Stud Holes Per NEMA for
Spade-Type Transformers and Bus Bars
■ Clear-coated, high-strength aluminum alloy construction
■ Chamfered wire entry
FIG. 1
FIG. 2
FIG. 3
FIG. 4
FIG. 5
FIG. 6
L
W
H
Tang
Thickness
(In.)
4
5-5/16
3
1-1/2
3/8
88-032
3
4
5-5/16
3
1-1/2
3/8
88-033
250 KCMIL – 6 AWG
6
8
5-5/16
6-5/32
1-1/2
3/8
88-035
250 KCMIL – 6 AWG
8
8
5-5/16
8-1/4
1-1/2
3/8
88-036
1
350 KCMIL – 6 AWG
1
2
5-5/16
1-1/4
1-1/2
3/8
88-037
L3D4-350
3
350 KCMIL – 6 AWG
3
4
5-5/16
3-1/2
1-1/2
3/8
88-039
L4D6-350
4
350 KCMIL – 6 AWG
4
6
5-5/16
4-23/32
1-1/2
3/8
88-040
L6D8-350
5
350 KCMIL – 6 AWG
6
8
5-5/16
7-1/8
1-1/2
3/8
88-041
L8D8-350
6
350 KCMIL – 6 AWG
8
8
5-5/16
9-9/16
1-1/2
3/8
88-042
L1D2-500
1
500 KCMIL – 6 AWG
1
2
5-5/16
1-1/4
1-1/2
3/8
88-043
L2D4-500
2
500 KCMIL – 6 AWG
2
4
5-5/16
3
1-1/2
3/8
88-044
L3D4-500
3
500 KCMIL – 6 AWG
3
4
5-5/16
3-7/8
1-1/2
3/8
88-045
L4D6-500
4
500 KCMIL – 6 AWG
4
6
5-5/16
5-1/4
1-1/2
3/8
88-046
L6D10-500
—
500 KCMIL – 6 AWG
6
10
5-5/16
7-29/32
1-1/2
3/8
88-047
L8D12-500
7
500 KCMIL – 6 AWG
8
12
5-5/16
10-19/32
1-1/2
3/8
88-048
L2D4-750
2
750 KCMIL – 1/0 AWG
2
4
6-3/16
3-1/4
1-7/8
9/16
88-050
L3D4-750
3
750 KCMIL – 1/0 AWG
3
4
6-3/16
5
1-7/8
9/16
88-051
L6D12-750
8
750 KCMIL – 1/0 AWG
6
12
6-3/16
10
1-7/8
9/16
88-053
L8D12-750
7
750 KCMIL – 1/0 AWG
8
12
6-3/16
13-3/8
1-7/8
9/16
88-054
Model
Fig.
No.
Wire
Range
No. of
No. of
Wires Mtg. Holes
L2D4-250
2
250 KCMIL – 6 AWG
2
L3D4-250
3
250 KCMIL – 6 AWG
L6D8-250
5
L8D8-250
6
L1D2-350
Dimensions (Inches)
Cat.
No.
FIG. 7
FIG. 8
1-800-435-0705 for Customer Service
www.idealindustries.com
A-33
Mechnical Lugs
■ Hex socket, pressure-pad screws
Powr-Connect™ Tap Connectors
Dual-Rated (Al/Cu) Parallel-Tap Connectors with Covers
■ Electro tin-plated, high-strength aluminum alloy construction
■ UL 486B Listed AL9CU — 105°C, 600V max.
Insulating cover reduces
installation cost
Wire Range
Mechanical Lugs
Flexible
hinge
Dimensions (Inches)
L
W
H
Main
Tap
Strip
Length (In.)
GP-2C
GP-1/0C
2 – 12 AWG
1/0 – 2 AWG
4 – 14 AWG
1/0 – 14 AWG
5/8
3/4
2-7/32
2-5/8
1-29/32
2-5/32
1-7/64
1-1/4
87-180
87-182
GP-250C
GP-350C
GP-500C
250 KCMIL – 1/0 AWG
350 KCMIL – 4/0 AWG
500 – 350 KCMIL
250 KCMIL – 6 AWG
350 KCMIL – 6 AWG
500 KCMIL – 2 AWG
1-1/16
1-1/4
1-3/8
3-7/16
3-3/4
4-3/8
2-7/8
3-3/16
3-5/16
1-5/8
1-3/4
2-3/32
87-186
87-190
87-194
Model
Cat.
No.
Self-locking
design
Dual-Rated (Al/Cu) Parallel-Tap Connectors without Covers
■ Electro tin-plated, high-strength aluminum alloy construction
■ UL 486B Listed AL9CU
Slotted
screws
Serrated barrel
bottom for positive
terminations
Wire Range
Dimensions (Inches)
L
W
H
Main
Tap
Strip
Length (In.)
GP-2
GP-1/0
2 – 12 AWG
1/0 – 2 AWG
4 – 14 AWG
1/0 – 14 AWG
5/8
3/4
1-25/64
1-3/4
5/8
3/4
7/8
1
87-150
87-152
GP-250
GP-350
GP-500
250 KCMIL – 1/0 AWG
350 KCMIL – 4/0 AWG
500 – 350 KCMIL
250 KCMIL – 6 AWG
250 KCMIL – 6 AWG
500 KCMIL – 2 AWG
1-1/16
1-1/4
1-3/8
2-9/32
2-9/16
3-1/8
1-1/16
1-1/4
1-3/8
1-5/16
1-7/16
1-3/4
87-156
87-160
87-164
Model
Cat.
No.
Dual-Rated (Al/Cu) Tee-Tap Connectors with Covers
■ Electro tin-plated, high-strength aluminum alloy construction
■ UL 486B Listed AL9CU — 105°C, 600V max.
Wire Range
Insulating cover reduces
installation cost
Flexible
hinge
A-34
Dimensions (Inches)
W
H
Model
Main
Tap
Strip
Length (In.)
L
Cat.
No.
GT-1/0C
GT-250-0C
1/0 – 2 AWG
250 KCMIL – 1/0 AWG
1/0 – 14 AWG
1/0 – 14 AWG
3/4
1-1/16
2-5/8
3-7/16
2-5/32
2-7/8
1-1/4
1-5/8
87-242
87-244
GT-350C
350 KCMIL – 4/0 AWG
350 KCMIL – 6 AWG
1-1/4
3-3/4
3-3/16
1-3/4
87-250
Self-locking
design
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Termination
Insulating Covers for GP and GT Connectors
■ 600V maximum
■ 105°C maximum temperature
Self-locking
design
Model
GIC-2
Thermoplastic
elastomer material
Cover For
Model
Color
L
Dimensions (Inches)
W
H
Cat.
No.
GP-2 & GT-2
Yellow
2-7/32
1-29/32
1-7/64
87-370
GIC-1/0
GP-1/0 & GT-1/0
Gray
2-5/8
2-5/32
1-1/4
87-372
GIC-250
GP & GT-250
GP & GT 250-0
Red
3-7/16
2-7/8
1-5/8
87-374
GIC-350
GP & GT-350
Yellow
3-3/4
3-3/16
1-3/4
87-376
GIC-500
GP & GT-500
Blue
4-3/8
3-5/16
2-3/32
87-380
Model
Wire
Range
L
W
H
Cat.
No.
CA-60**
2 – 14 AWG
9/16
15/32
15/32
87-583
CA-110*
1/0 – 14 AWG
19/32
17/32
5/8
87-585
Dual-Rated (AI/Cu) Collar Connectors
Slotted wire
screw
10-32 tapped mounting hole
with 0.229 in. square boss
for bottom mounting to
electrical devices or bus bars
Dimensions (Inches)
*Successfully tested to AL9CU
**Successfully tested to AL7CU
Powr-Connect™ Grounding Connectors
■ Designed to maintain proper contact and alignment between ground and wire rod
■ Brass or plated screws for corrosion resistance
■ High-strength copper alloy construction
High-Strength Ground Clamps
Heavy-Duty Clamps
Dimensions (Inches)
H
W
L
Model
Rod
Dia. (In.)
Wire
Range
Cat.
No.
WB58
5/8
1/0 – 8
2-1/8
7/8
1
87-958
WB34
3/4
1/0 – 8
2-1/4
1-1/16
1
87-934
Dimensions (Inches)
H
W
L
Pipe
Size (In.)
Wire
Range
J
1/2 – 1
2 – 10
2-3/4
J2
1-1/4 – 2
2 – 10
J2124
2-1/2 – 4
4 – 10
Model
Cat.
No.
2-3/8
3/4
87-563
3-3/4
3-5/8
7/8
87-564
6
6-5/16
1
87-565
Standard-Duty Clamps
Dimensions (Inches)
H
W
L
Model
Rod
Dia. (In.)
Wire
Range
G-4
1/2
2 – 10
1-7/8
13/16
11/16
87-812
G-5
5/8
2 – 10
2
7/8
5/8
87-858
1-800-435-0705 for Customer Service
Cat.
No.
www.idealindustries.com
A-35
Mechanical Lugs
Range
identification
with color code
Flexible hinge
Type K Split Bolts for
Copper Connections
Dual-Rated (Al/Cu) Type AS Split Bolts
■ UL 486B Listed AL9CU
Aluminum, tin-plated
to inhibit oxide formation
■ High-strength copper alloy construction (nut, bolt and body)
Spacer provides serration
to retard corrosion
■ UL 486A Listed
Wire range
Anti-galling
threaded components
"Tooth" configuration
provides low contact
resistance
Mechanical Lugs
Wire Range
Bottom pad attached
to nut and guide
assembly
Run
Model
Tap
Min.
10 sol.
Max.
6 str.
Min.
10 sol.
Cat. No.
AS-6
Max.
6 str.
AS-4
4 str.
8 sol.
4 str.
10 sol.
87-682
AS-2
2 str.
6 sol.
2 str.
8 str.
87-683
87-681
Model
Range for
Equal Run
& Tap
Min. Tap
with Max.
Run
Cat. No.
AS-1/0
1/0 str.
2 compact
1/0 str.
8 sol.
87-685
K-10*
10 str. – 12 str.
16 str.
87-650
AS-2/0
2/0 str.
2 compact
2/0 str.
8 str.
87-686
K-8
8 str. – 10 str.
14 str.
87-651
AS-4/0
4/0 str.
2 compact
4/0 str.
6 str.
87-687
K-6
6 sol. – 8 str.
14 str.
87-652
AS-350
350 KCMIL 1/0 compact
350 KCMIL
4 str.
87-689
K-4
4 sol. – 8 str.
14 str.
87-653
AS-500
500 KCMIL 400 compact
500 KCMIL 2 compact
K-3
2 sol. – 6 str.
14 str
87-654
K-2
2 str. – 6 str.
14 str.
87-655
K-1/0
1/0 str. – 4 str.
14 str.
87-656
K-2/0
2/0 str. – 2 str.
14 str.
87-657
K-3/0
3/0 str. – 1 str.
8 sol.
87-658
K-250
250 KCMIL –1 str.
8 str.
87-660
K-350
350 KCMIL – 1/0 str.
1/0 str.
87-661
K-500
500 KCMIL – 2/0 str
2/0 str.
87-662
K-750
750 KCMIL – 4/0 str.
4/0 str.
87-663
Hex Wrenches
Model
Hex.
Length (Inches)
Cat. No.
5/16
9
87-396
WR-38
3/8
10
87-397
A-36
Dual-Rated (Al/Cu) Street-Light
Connector Kit with Cover
■ UL 486A Listed (Lug only)
Flexible plastisol
insulating cover
Chamfered
wire entry
WR-516
www.idealindustries.com
87-691
Aluminum screws
Model
Wire
Range
No. of
Cond.
SLK-1/0
1/0 – 14 AWG
3
Dimensions (Inches)
L
W
H
2
1-3/16
Cat.
No.
2-3/16 88-100
1-800-435-0705 for Customer Service
Wire Termination
Powr-ConnectTM Mechanical Solderless Lugs
Single-Hole Solderless Lugs for Copper Conductors (Offset)
■ Electrolytic copper construction
Slotted
screw
Wire range
and stud size
identification
Hex head
bolt
Dimensions (Inches)
L
W
H
Model
Wire
Range
Stud
Size (In.)
Cat.
No.
CF-25*
CF-35
CF-70
CF-90
10 – 14 AWG
6 – 14 AWG
4 – 14 AWG
2 – 8 AWG
#8
3/16
1/4
1/4
1
1-3/32
1-5/16
1-15/32
5/16
3/8
1/2
1/2
3/8
3/4
13/16
1
87-700
87-701
87-702
87-703
CF-125
CF-175
CF-225
1/0 – 2 AWG
3/0 – 2 AWG
4/0 – 2 AWG
1/4
3/8
5/16
1-13/16
2-3/64
2-5/8
5/8
3/4
1
1-11/32
1-9/16
1-13/16
87-704
87-705
87-706
*Not CSA Certified
Floating
offset tang
Barrel collar
ensures positive contact
Single-Hole Solderless Lugs for Copper Conductors (Straight)
■ Electrolytic copper construction
■ UL 486A Listed
Slotted
screw
Wire range
and stud size
identification
Hex head
bolt
Dimensions (Inches)
L
W
H
Model
Wire
Range
Stud
Size (In.)
Cat.
No.
CFS-35
CFS-70
CFS-90
6 – 14 AWG
4 – 14 AWG
2 – 8 AWG
3/16
1/4
1/4
1-9/64
1-1/4
1-15/32
3/8
1/2
1/2
11/16
27/32
31/32
87-721
87-722
87-723
CFS-125
CFS-175
CFS-225
1/0 – 2 AWG
3/0 – 2 AWG
4/0 – 2 AWG
1/4
3/8
5/16
1-15/16
2-1/4
2-3/8
5/8
3/4
1
1-1/4
1-9/16
1-21/32
87-724
87-725
87-726
Floating
straight tang
and mounting
hole
Wires between arched
pressure bar and bottom
ensure positive contact
Single-Hole Solderless Lugs for Copper Conductors
■ Electrolytic copper construction
■ UL 486A Listed
Slotted
screw
Tang
staked to
collar
Dimensions (Inches)
L
W
H
Model
Wire
Range
Stud
Size (In.)
Cat.
No.
FT-65
6 – 14 AWG
3/16
1
3/8
3/4
87-736
FT-90
1/0 – 14 AWG
1/4
1-17/64
5/8
1
87-738
Hex
socket
screw
1-800-435-0705 for Customer Service
www.idealindustries.com
A-37
Mechanical Lugs
■ UL 486A listed
Dual-Rated (Al/Cu) Above-Ground Transformer Connectors
■ Clear-coated, high-strength aluminum alloy construction
Clear-coated
aluminum
body
Hex socket
pressure pad
screws
Mechanical Lugs
Chamfered
wire entry
Hex socket
pressure pad
screws
Dimensions (Inches)
L
W
H
Model
Wire
Range
No.of
Wires
Cat.
No.
NA250-4
NA250-6
250 KCMIL – 6 AWG
250 KCMIL – 6 AWG
4
6
3-5/8
5-3/8
7/8
7/8
1-1/8
1-1/8
88-103
88-104
NA350-4
NA350-6
NA350-8
350 KCMIL – 6 AWG
350 KCMIL – 6 AWG
350 KCMIL – 6 AWG
4
6
8
3-27/32
5-21/32
7-15/32
1
1
1
1-3/8
1-3/8
1-3/8
88-106
88-107
88-108
NA500-4
NA500-6
NA500-8
500 KCMIL – 2 AWG
500 KCMIL – 2 AWG
500 KCMIL – 2 AWG
4
6
8
4-27/32
7-7/32
9-19/32
1
1
1
1-5/8
1-5/8
1-5/8
88-109
88-110
88-111
ND750-4
750 KCMIL – 2 AWG
4
6-5/8
2
2-1/2
88-113
Chamfered
wire entry
Clear-coated
aluminum
body
Insulating Covers for Above-Ground Transformer Connectors
■ Clear-coated, high-strength aluminum alloy construction
■ Sizes to fit all connectors
Flexible plastisol
insulating cover
Model
L
Dimensions (Inches)
W
H
Cat.
No.
NC4-250
NC6-250
NC8-250
3-7/8
5-23/32
7-17/32
1-19/32
1-19/32
1-19/32
3-3/8
3-3/8
3-3/8
88-136
88-137
88-138
NC4-350
NC6-350
4-1/8
6
1-27/32
1-27/32
3-3/8
3-3/8
88-139
88-140
NC4-500
NC6-500
NC8-500
5-5/32
7-5/8
10-3/32
2-3/16
2-3/16
2-3/16
3-3/8
3-3/8
3-3/8
88-152
88-153
88-154
No cover available for ND-750 models
A-38
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Installation
B
Fish Tape Material Selection Guide
What Are Your Needs?
Pushing Power
Selection Guide
For every day use in longer
runs with few bends
• Unique blued
finish is nonoily & resists
rust
• Multiple
options in
width, length
& termination
for ease of use
• Stiffer for
long runs
• Won’t rust or
corrode in
damp locations
or humid
environments
• Super clean
finish prevents
marks on walls
or carpets
Blued Steel
Stainless
Steel
Fishes Easily Around
Bends
Non-Conductive
Materials
Best in shorter runs and smaller
conduit diameters
When working around live
circuits is unavoidable
• 19 strand
stainless steel
will not rust
• Ultrahard
nylon jacket
adds
slipperiness,
protects
cables & the
user’s hands
• Brass-plated
coiled steel
resists rust
• No “memory”hangs straight
after being
coiled for long
periods
• Kink proof
• Strong
fiberglass core
for longer life
and greater
pushing power
• Smooth nylon
jacket
provides great
handling
around bends
• Durable monofilament
material will
not splinter or
fray
• Value
conscious
option, great
for occasionl
use
Gold-Fish®
S-Class™
Nylon
Zoom™
WARNING
Always use approved safety glasses when using this product.
Do not use near energized equipment. Electrical shock may occur. Make sure all power is off.
Do not use pliers or other tools that may kink, damage, or weaken any round fish tapes such
as S-Class®, Nylon or Zoom™. Use only a fish tape puller designed for this purpose.
While fish tapes made of fiberglass, nylon or other composite materials are non-conductive,
they may have a metal eyelet that is conductive and could be grounded against conduit. Do
not use on live electrical circuits.
Do not attempt to use fish tape that is fractured or has multiple ends.
Keep the fish tape wound in the reel to prevent damage to the tape.
Use this product in a safe work position to prevent loss of balance.
Never remove the screws from case while fish tape is coiled inside the reel.
Failure to follow instructions may result in severe bodily harm or damage to property.
2
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Installation
Tape Selection Guide
1-800-435-0705 for Customer Service
Tape-Pak®
w/footage
counter
Rapid-Pak®
X
X
X
X
31-082
X
31-126
X
X
X
31-127
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
31-081
X
X
X
31-098
X
X
X
X
X
X
X
X
X
X
X
X
X
X
31-012
X
31-010
X
X
X
X
X
X
X
X
X
X
31-004
X
X
X
X
X
X
31-073
31-074
X
X
X
X
X
X
X
X
X
X
X
X
X
31-187
31-190
31-186
31-189
X
X
31-207
31-208
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
None
31-150
31-160
31-152
31-162
31-191
31-205
31-155
31-165
31-2138
31-400
31-3370
X
X
X
X
X
X
X
X
X
31-550
31-552
31-554
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
31-140
31-141
31-132
Use 31-133
31-133
31-142
31-134
X
X
X
X
X
X
X
X
X
31-091
31-093
31-097
ThumbWinder™
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Replacement
Tapes
X
31-904
X
31-079
31-039
31-035
31-040
31-040
31-040
31-036
31-041
31-041
31-041
31-038
31-3380
31-050
31-051
31-052
31-2127
31-2128
31-2980
31-3379
31-2139
31-3384
31-2982
www.idealindustries.com
Fish Tapes
Width &
Case
End
Tuff-Grip™
Thickness
Length Diameter
Type
Pro
Tuff-Grip™ Tape-Pak®
Blued Steel
1/8 in. x .045 in.
25
7 in.
Formed hook
X
X
X
1/8 in. x .045 in.
40
For 12 in.
Formed hook
X
X
X
1/8 in. x .045 in.
50
7 in.
Formed hook
X
X
X
1/X8 in. x .045 in.
100
For 12 in.
Formed hook
X
X
X
1/8 in. x .060 in.
50
12 in.
Formed hook
X
X
X
1/8 in. x .060 in.
60
12 in.
Formed hook
31-055
X
X
1/8 in. x .060 in.
100
12 in.
Formed hook
X
X
X
1/8 in. x .060 in.
100
12 in.
Swivel ball end
31-224
X
X
1/8 in. x .060 in.
100
12 in.
Gold fish leader end
31-124
X
X
1/8 in. x .060 in.
120
12 in.
Formed hook
31-056
X
X
1/8 in. x .060 in.
200
12 in.
Formed hook
X
X
1/8 in. x .060 in.
200
12 in.
Swivel ball end
31-225
X
X
1/8 in. x .060 in.
200
12 in.
Gold fish leader end
31-125
X
X
1/8 in. x .060 in.
240
12 in.
Formed hook
31-057
X
X
1/8 in. x .060 in.
500
12 in.
Formed hook
X
X
X
1/8 in. x .060 in.
50
12 in.
Formed hook
31-059
X
X
1/8 in. x .060 in.
100
None
Formed hook
31-058
X
X
1/8 in. x .060 in.
200
None
Formed hook
X
X
X
1/8 in. x .060 in.
300
None
Formed hook
X
X
X
1/8 in. x .060 in.
400
None
Formed hook
X
X
X
1/8 in. x .060 in.
600
None
Formed hook
X
X
X
1/8 in. x .060 in.
700
None
Formed hook
X
X
X
1/8 in. x .060 in.
750
None
Formed hook
X
X
X
1/8 in. x .060 in.
1,000
None
Formed hook
X
X
X
1/8 in. x .060 in. 10,000
None
Formed hook
X
X
X
Black Steel
1/8 in. x .060 in.
50
8-1/2 in.
Formed hook
X
X
31-033
1/8 in. x .060 in.
100
12 in.
Formed hook
31-024
X
X
1/8 in. x .060 in.
200
12 in.
Formed hook
31-025
X
X
Stainless Steel
1/8 in. x .060 in.
120
12 in.
Formed hook
31-066
X
X
1/8 in. x .060 in.
240
12 in.
Formed hook
31-067
X
X
S-Class® Nylon Jacketed Fiberglass
3/16 in. diameter
25
8-1/2 in.
Eyelet
X
X
31-157
3/16 in. diameter
50
12 in.
Leader
31-060
X
X
3/16 in. diameter
50
12 in.
Eyelet
31-062
X
X
3/16 in. diameter
100
12 in.
Leader
31-061
X
X
3/16 in. diameter
100
12 in.
Eyelet
31-063
X
X
3/16 in. diameter
125
For 12 in.
Leader
X
X
X
3/16 in. diameter
125
For 12 in.
Eyelet
X
X
X
3/16 in. diameter
200
16 in.
Leader
X
31-064
X
3/16 in. diameter
200
16 in.
Eyelet
X
31-065
X
3/16 in. diameter
300
None
Eyelet
X
X
X
3/16 in. diameter
400
None
Eyelet
X
X
X
3/16 in. diameter
500
None
Eyelet
X
X
X
Nylon Monofilament
3/16 in. diameter
25
8-1/2 in.
Eyelet
X
X
31-540
3/16 in. diameter
50
12 in.
Eyelet
31-542
X
X
3/16 in. diameter
100
12 in.
Eyelet
31-544
X
X
Gold-Fish Brass Plated Steel Coil
3/16 in. diameter
25
8-1/2 in.
Eyelet
X
X
31-143
3/16 in. diameter
50
12 in.
Eyelet
31-144
X
X
3/16 in. diameter
50
For 12 in.
Small Eyelet
X
X
X
3/16 in. diameter
75
12 in.
Eyelet
31-145
X
X
3/16 in. diameter
75
For 12 in.
Small Eyelet
X
X
X
3/16 in. diameter
100
—
Eyelet
X
X
X
3/16 in. diameter
100
—
Small Eyelet
X
X
X
Zoom™ Nylon Jacketed Stainless Steel
3/16 in. diameter
50
12 in.
Eyelet
31-090
X
X
3/16 in. diameter
100
12 in.
Eyelet
31-092
X
X
3/16 in. diameter
200
12 in.
Eyelet
X
31-096
X
3
Tuff-Grip™ Pro
■ Patented Tuff-Cuff™ tape retaining feature keeps tape properly
positioned in the opening
■ Patented full-circle handle band helps keep dirt and moisture
out, prolonging life
■ Easier to install replacement tapes
■ Superior pull out and rewind characteristics
■ Exceptionally durable case and handle
■ Clean contemporary styling
Fish Tapes
■ Large, comfortable ergonomically-designed handle, grasp from
the top or side. Allows for use with gloves
Cat. No.
Material
Width & Thickness
(in.)
31-055
Blued Steel
31-224*
Blued Steel
End Type
Replacement
Tape
Cat. No.
Length
Case Diameter
1/8 x .060
60
12 in.
Formed hook
31-035
1/8 x .060
100
12 in.
Swivel ball end
31-040 plus 31-085
31-040 plus 31-148
31-124*
Blued Steel
1/8 x .060
100
12 in.
Gold fish leader end
31-056
Blued Steel
1/8 x .060
120
12 in.
Formed hook
31-036
31-225*
Blued Steel
1/8 x .060
200
12 in.
Swivel ball end
31-041 plus 31-085
31-125*
Blued Steel
1/8 x .060
200
12 in.
Gold fish leader end
31-041 plus 31-148
31-057
Blued Steel
1/8 x .060
240
12 in.
Formed hook
31-038
31-059*
Blued Steel
1/4 x .060
50
12 in.
Formed hook
31-050
31-058*
Blued Steel
1/4 x .060
100
12 in.
Formed hook
31-051
31-024*
Black Steel
1/8 x .060
100
12 in.
Formed hook
31-036
31-025*
Black Steel
1/8 x .060
200
12 in.
Formed hook
31-038
31-066
Stainless Steel
1/8 x .060
120
12 in.
Formed hook
31-073
31-067
Stainless Steel
1/8 x .060
240
12 in.
Formed hook
31-074
31-060*
S-Class Nylon Jacketed Fiberglass
3/16 in. diameter
50
12 in.
Leader
31-150
31-062*
S-Class® Nylon Jacketed Fiberglass
3/16 in. diameter
50
12 in.
Eyelet
31-160
31-061*
S-Class® Nylon Jacketed Fiberglass
3/16 in. diameter
100
12 in.
Leader
31-152
31-063*
®
S-Class Nylon Jacketed Fiberglass
3/16 in. diameter
100
12 in.
Eyelet
31-162
31-542*
Nylon Monofilament
3/16 in. diameter
50
12 in.
Eyelet
31-552
31-554
®
31-544*
Nylon Monofilament
3/16 in. diameter
100
12 in.
Eyelet
31-144*
Gold-Fish® Brass Plated Steel Coil
3/16 in. diameter
50
12 in.
Eyelet
31-141
31-145*
Gold-Fish® Brass Plated Steel Coil
3/16 in. diameter
75
12 in.
Eyelet
Use 31-133
31-090*
Zoom™ Nylon Jacketed Stainless Steel
3/16 in. diameter
50
12 in.
Eyelet
31-091
31-092*
Zoom™ Nylon Jacketed Stainless Steel
3/16 in. diameter
100
12 in.
Eyelet
31-093
*Available in Tuff-Grip™ Pro case Mid-2004.
4
www.idealindustries.com
1-800-435-0705 for Customer Service
Thumb Winder™
Fish Tapes
Tape-Pak® Fish Tapes
with Footage Counters
■ Convenient 7 in. size can
be stored in tool bag
■ Easy-to-read counter with
magnified numbers
■ Durable, impact-resistant
ABS case
■ Saves time and effort when
working with long, concealed
conduit runs
■ Easy-to-use thumboperated rewind
Description
Cat. No.
Description
Cat. No.
Replacement
Tape
Cat. No.
Steel Tape – 25 ft.
31-012
Steel tape – 100 ft. x 1/8 in. x .060 in.
31-126
31-036
Steel Tape – 50 ft.
31-010
Steel tape – 200 ft. x 1/8 in. x .060 in.
31-127
31-038
Description
Cat. No.
Replacement
Tape
Cat. No.
S-Class® with Leader – 200 ft.
31-064
31-155
S-Class® with Eyelet – 200 ft.
31-065
31-165
Zoom™ – 200 ft.
31-096
31-097
Description
Cat. No.
Replacement
Tape
Cat. No.
Blued Steel tape – 50 ft. x 1/8 in. x .060 in.
31-082
31-039
Blued Steel tape – 100 ft. x 1/8 in. x .060 in.
31-081
31-040
Blued Steel tape – 200 ft. x 1/8 in. x .060 in.
31-098
31-041
Fiberglass tape w/leader – 50 ft.
31-187
31-150
Fiberglass tape w/leader – 100 ft.
31-186
31-152
Fiberglass tape w/leader – 200 ft.
31-207
31-155
Fiberglass tape w/eyelet – 50 ft.
31-190
31-160
Fiberglass tape w/eyelet – 100 ft.
31-189
31-162
Fiberglass tape w/eyelet – 200 ft.
31-208
31-165
Replacement crank assembly (winder knob)
31-220
—
Tape-Pak® Fish Tapes
Tuff-Grip™ Fish Tapes
■ Compact 8-1/2 in. case size saves space
■ Large 16 in. case
accommodates long tape
lengths
■ Convenient, durable impact-resistant case
Description
Cat. No.
Replacement
Tape
Cat. No.
Steel tape – 50 ft.
31-033
31-004
S-Class – 25 ft.
31-157
—
Gold-Fish® – 25 ft.
31-143
31-140
Nylon – 25 ft.
31-540
31-550
®
■ Large, comfortable, durable
handle provides secure grip
and ease of use
■ Durable impact-resistant case
Rapid-Pak® Fish Tapes
■ Inner rotating reel with
winding knob retrieves
tape faster than
traditional fish tapes for
increased labor savings
■ Funneled tape opening
reduces kinking and
tape breakage
■ Reversible, hinged knob
for right- or left-handed
rewinds
■ Stationary handle for extra durability
■ Textured case surface provides positive grip
■ Impact-resistant plastic case
1-800-435-0705 for Customer Service
www.idealindustries.com
5
Fish Tapes
Wire Installation
Wire Installation
Tapes without Cases
Width & Thickness
(in.)
Material
Case Diameter
End Type
Cat. No.
Fish Tapes
Blued Steel
1/8 x .045
40
For 12 in.
Formed hook
31-904
Blued Steel
1/8 x .045
100
For 12 in.
Formed hook
31-079
Blued Steel
1/8 x .060
25
For 8-1/2 in.
Formed hook
31-003
Blued Steel
1/8 x .060
50
12 in.
Formed hook
31-039
Blued Steel
1/8 x .060
60
12 in.
Formed hook
31-035
Blued Steel
1/8 x .060
100
12 in.
Formed hook
31-040
Blued Steel
1/8 x .060
120
12 in.
Formed hook
31-036
Blued Steel
1/8 x .060
200
12 in.
Formed hook
31-041
Blued Steel
1/8 x .060
240
12 in.
Formed hook
31-038
Blued Steel
1/8 x .060
500
None
Formed hook
31-3380
Black Steel
1/4 x .060
50
12 in.
Formed hook
31-050
Black Steel
1/4 x .060
100
12 in.
Formed hook
31-051
Blued Steel
1/4 x .060
200
None
Formed hook
31-052
Blued Steel
1/4 x .060
300
None
Formed hook
31-2127
Blued Steel
1/4 x .060
400
None
Formed hook
31-2128
Blued Steel
1/4 x .060
600
None
Formed hook
31-2980
Blued Steel
1/4 x .060
700
None
Formed hook
31-3379
Blued Steel
1/4 x .060
750
None
Formed hook
31-2139
Blued Steel
1/4 x .060
1,000
None
Formed hook
31-3384
Black Steel
1/8 x .060
50
8-1/2 in.
Formed hook
31-004
Stainless Steel
1/8 x .060
120
12 in.
Formed hook
31-073
Stainless Steel
1/8 x .060
240
12 in.
Formed hook
31-074
S-Class Nylon Jacketed Fiberglass
3/16 in. diameter
50
12 in.
Leader
31-150
S-Class® Nylon Jacketed Fiberglass
3/16 in. diameter
50
12 in.
Eyelet
31-160
S-Class® Nylon Jacketed Fiberglass
3/16 in. diameter
100
12 in.
Leader
31-152
®
S-Class Nylon Jacketed Fiberglass
3/16 in. diameter
100
12 in.
Eyelet
31-162
S-Class® Nylon Jacketed Fiberglass
3/16 in. diameter
125
For 12 in.
Leader
31-191
S-Class® Nylon Jacketed Fiberglass
3/16 in. diameter
125
For 12 in.
Eyelet
31-205
S-Class Nylon Jacketed Fiberglass
3/16 in. diameter
200
16 in.
Leader
31-155
S-Class® Nylon Jacketed Fiberglass
3/16 in. diameter
200
16 in.
Eyelet
31-165
S-Class® Nylon Jacketed Fiberglass
3/16 in. diameter
300
None
Eyelet
31-2138
S-Class® Nylon Jacketed Fiberglass
3/16 in. diameter
400
None
Eyelet
31-400
S-Class® Nylon Jacketed Fiberglass
3/16 in. diameter
500
None
Eyelet
31-3370
Nylon Monofilament
3/16 in. diameter
25
8-1/2 in.
Eyelet
31-550
Nylon Monofilament
3/16 in. diameter
50
12 in.
Eyelet
31-552
Nylon Monofilament
3/16 in. diameter
100
12 in.
Eyelet
31-554
Gold-Fish® Brass Plated Steel Coil
3/16 in. diameter
25
8-1/2 in.
Eyelet
31-140
®
®
Gold-Fish® Brass Plated Steel Coil
3/16 in. diameter
50
12 in.
Eyelet
31-141
Gold-Fish® Brass Plated Steel Coil
3/16 in. diameter
50
For 12 in.
Small Eyelet
31-132
Gold-Fish® Brass Plated Steel Coil
3/16 in. diameter
75
For 12 in.
Small Eyelet
31-133
Gold-Fish Brass Plated Steel Coil
3/16 in. diameter
100
—
Eyelet
31-142
Gold-Fish® Brass Plated Steel Coil
3/16 in. diameter
100
—
Small Eyelet
31-134
Zoom™ Nylon Jacketed Stainless Steel
3/16 in. diameter
50
12 in.
Eyelet
31-091
Zoom™ Nylon Jacketed Stainless Steel
3/16 in. diameter
100
12 in.
Eyelet
31-093
Zoom™ Nylon Jacketed Stainless Steel
3/16 in. diameter
200
16 in.
Eyelet
31-097
®
6
Length
(Ft.)
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Installation
Fish Tape Leaders
S-Class® Fiberglass and Zoom™ Fish Tape
Field Application Kits
■ Crimps on new eyelet or leader
in minutes
■ Guides fish tape around bends in conduit
■ Dies can be used with
Crimpmaster™ Crimp Tool
■ Handles up to six 10 AWG bare wires
Description
Cat. No.
Fish Tape Leader for steel or stainless steel tapes
31-148
Fish Tape Leader for S-Class® Fiberglass
31-159
Fish Tape Swivel Ball
Description
Cat. No.
Field Application Kit includes:
Crimpmaster™ Crimp Tool frame, die set, S-Class® eyelets (2),
S-Class® leaders (2), Zoom™ eyelets (2) & instant adhesive
31-156
Die Set Kit* includes: eyelets (2), leaders (2)
& instant adhesive
31-164
Replacement eyelets (4) for S-Class®
31-158
■ Designed for use on 1/8 in. steel or
stainless steel tape
Replacement eyelets (2) for Zoom™
31-094
Replacement leaders (4) for S-Class®
31-159
■ Eyelet holds up to four 10 AWG
bare wires
*For those who already have a Crimpmaster™ Crimp Tool
■ Swivels to prevent wires from twisting
during pull
Description
Cat. No.
Fish Tape Swivel Ball
31-085
Fish Tape Accessories
■ Connection guaranteed
to withstand 500 lbs.
■ Pulls up to 500 lbs.
Puller for S-Class® Fiberglass Fish Tapes
and Tuff-Rod™ Fishing Poles
■ Non-slip material securely grips
fiberglass without damaging
material
■ Fits into standard 12 in.
fish tape case opening
when not in use
Description
Cat. No.
Fish Tape Puller
31-170
Multi-Wire Pulling Leaders
■ Pulls multiple wires at
one time
■ Staggered connection
points prevent bunching
or hang-ups in tight bends
■ 500 lb. working strength at
main eyelet and up to 150 lbs.
with each individual eyelet
WARNING
Description
Cat. No.
Multi-Wire Pulling Leader – 6-loop
31-146
Multi-Wire Pulling Leader – 4-loop
31-147
1-800-435-0705 for Customer Service
Always use approved safety glasses when using this product.
Do not use near energized equipment. Electricalshock may occur. Make sure all power is off.
Do not use pliers or other tools that may kink, damage, or weaken any round fish tapes such
as S-Class®, Nylon or Zoom™. Use only a fish tape puller designed for this purpose.
While fish tapes made of fiberglass, nylon or other composite materials are non-conductive,
they may have a metal eyelet that is conductive and could be grounded against conduit. Do
not use on live electrical circuits.
Do not attempt to use fish tape that is fractured or has multiple ends.
Keep the fish tape wound in the reel to prevent damage to the tape.
Use this product in a safe work position to prevent loss of balance.
Never remove the screws from case while fish tape is coiled inside the reel.
Failure to follow instructions may result in severe bodily harm or damage to property.
www.idealindustries.com
7
Wire Installation
Tuff-Rod™ Fishing Poles
w
Ne
■ Strong, lightweight, flexible extendable fiberglass rod kits
■ Use to reach and pull wires over suspended ceilings, in cable trays or through interior walls
■ Packaged in clear tubes for protection and long term storage
Fishting Poles
Tuff-Rod™ Regular Flex
Tuff-Rod™ Extra Flex
Tuff-Rod™ Extra Flex Glow
■ 1/4 in. white fiberglass
■ 3/16 in. blue fiberglass
■ Extra stiffness for added control when
maneuvering wires
■ Extra flexibility for ease of use in tight
spaces inside walls
■ 3/16 in. pale green luminescent
fiberglass
Description
■ Glow in the dark material for easy use in
attics, basements and other dim lit areas
Cat. No.
Description
Cat. No.
Description
Cat. No.
12 ft. kit with fixed bullet nose and
threaded J hook
31-611
12 ft. kit with fixed bullet nose and
threaded J hook
31-621
12 ft. kit with fixed bullet nose and
threaded J hook
31-631
24 ft. kit with fixed bullet nose and
threaded bullet nose
31-612
30 ft. kit with fixed bullet nose and
threaded bullet nose
31-623
30 ft. kit with fixed bullet nose and
threaded bullet nose
31-633
Two 4 ft. replacement rods
31-616
Two 4 ft. replacement rods
31-626
Two 4 ft. replacement rods
31-636
Two 6 ft. replacement rods
31-617
Two 6 ft. replacement rods
31-627
Two 6 ft. replacement rods
31-637
Accessory Kits
Repair Kits
■ Includes replacement heads,
one threaded bullet nose, one
threaded J hook and one
threaded wisp
■ Includes one male
threaded end, one female
threaded end, one fixed
bullet nose, three glue
packs and free glue
applicator
Description
Cat. No.
Description
Cat. No.
3/16 in. Accessory kit
31-651
3/16 in. Repair kit
31-641
1/4 in. Accessory kit
31-652
1/4 in. Repair kit
31-642
8
www.idealindustries.com
1-800-435-0705 for Customer Service
Make every pull fast and easy
Excellent Lubrication
Advanced Cable Protection
Great for
indoor
and retrofit
The Industry
Standard
since1959
The Industry
Standard plus
hot
temperature
and all cable
compatibility
Yellow 77®
Yellow 77®
Plus
Lubricants
Fast, Easy Clean-up
Great for big
jobs
Clear, clean, no
mess gel for
unsurpassed
convenience
Thick gel for
hand
application
Thin gel for
pouring or
pumping
Cold
temperature
compatibility
ClearGlide™
Aqua-Gel® II
Aqua-Gel® IIP
Aqua-Gel® CW
Wire Pulling Lubricant Selection Guide
Application
Yellow 77® Plus
Wire Pulling
Lubricant
Yellow 77®
Wire Pulling
Lubricant
ClearGlide™
Wire Pulling
Lubricant
Aqua-Gel® ll
Cable Pulling
Lubricant
Aqua-Gel® llP
Cable Pulling
Lubricant
Aqua-Gel® CW
Cable Pulling
Lubricant
Utility –
Construction
& Maintenance
General
Purpose –
Construction &
Maintenance
General Purpose –
Construction,
Maintenance &
Telecommunications
Utility –
Construction &
Maintenance
Utility –
Construction,
Maintenance &
Telecommunications
Cold Weather –
Construction &
Maintenance
Polymer
Base
Wax
Wax
Polymer
Polymer
Polymer
Average Coefficient of Friction
0.034
0.07
0.032
0.052
0.050
0.055
30°F – 190°F
(-1°C – 88°C)
32°F – 130°F
(0°C – 54°C)
30°F – 180°F
(-1°C – 82°C)
28°F – 180°F
(-2°C – 82°C)
28°F – 180°F
(-2°C – 82°C)
-28°F – 180°F
(-33°C – 82°C)
Rubber
•
•
•
•
•
•
Neoprene
•
•
•
•
•
•
Nylon
•
•
•
•
•
•
PVC
•
•
•
•
•
•
High-density or cross-linked polyethylene
•
•
Low-density polyethylene
•
Semiconducting jacket
•
Hypalon
•
Temperature Range
COMPATIBILITY (Cable Types):
1-800-435-0705 for Customer Service
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
www.idealindustries.com
9
Wire Installation
Yellow 77® Plus Wire Pulling Lubricant
■ DuPont™ TEFLON® additive provides greater lubricity than other
wax-based lubricants — great for tough pulls
■ Safe to use with all cable types
■ Clings to cable throughout long runs, even where moisture is
present
■ Remains stable in high temperatures — usable from 30°F to
190°F (-1°C to 88°C)
■ Dries slowly to a thin, non-conductive film that won’t harden
in conduit
Lubricants
■ Easy to apply by hand or by brush
■ Creamy texture applies easily and uniformly
■ Homogeneous blend requires no mixing
■ Won't dry out – surface coat forms to control evaporation
■ Environmentally safe – non-toxic, non-flammable and non-corrosive
Description
Cat. No.
1-qt. Squeeze bottle
31-398
1-gal. Bucket
31-391
5-gal. Bucket
31-395
DuPont™ and TEFLON are trademarks or registered trademarks of E.J. du Pont de Nemours and Company.
®
Yellow 77® Wire Pulling Lubricant
■ The #1 brand of wire pulling lubricant since 1959 — the perfect
general purpose lube
■ Wax-based formula provides superior lubricity
■ Safe to use with most cable types except low-density polyethylene
and semi-conducting jackets
■ Clings to cable throughout long pulls, even where moisture is
present
■ Won’t breakdown or separate after repeated exposure to
freezing temperatures
■ Dries to a thin, non-conductive film
■ Easy to apply by hand or by brush
■ Creamy texture applies easily and uniformly
■ Homogeneous blend requires no mixing
■ Won’t dry out — surface coat forms to control evaporation
■ Environmentally safe — non-toxic, non-flammable and non-corrosive
Description
Cat. No.
1-qt. Squeeze bottle
31-358
1-qt. Tub
31-350
1-gal. Bucket
31-351
5-gal. Bucket
31-355
55-gal. Drum
31-365
10
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Installation
ClearGlide™ Wire Pulling Lubricant
■ Clear and colorless for quick and easy clean-up — great for indoor
and retrofit pulls
■ Exceptional lubricity for super-fast pulls
■ Polymer-based formula is perfect for all electrical and
datacomm applications
■ Safe to use with all cable types
■ Controlled evaporation rate is ideal for shorter runs
Lubricants
■ Remains stable over wide temperature range — usable from
30°F to 180°F (-1°C to 82°C)
■ Dries to a semi-fluid film that won't clog conduit
■ Easy to apply by hand, brush or pump
■ Environmentally safe — non-toxic, non-flammable and non-corrosive
Description
Cat. No.
1-qt. Squeeze bottle
31-388
1-gal. Bucket
31-381
5-gal. Bucket
31-385
4 oz. Squeeze bottle in saleable 6-pack
31-389
Aqua-Gel® II Cable Pulling Lubricant
■ Polymer-based formula provides maximum tension reduction in
high-stress electrical and communications cable-pulling operations
■ Compatible with all cable types
■ Cleans up easily with soap and water
■ Clings to cable throughout long pulls
■ Remains stable over wide temperature range — usable from
28°F to 180°F (-2°C to 82°C)
■ Dries to a semi-fluid film that won’t clog conduit
■ Easy to apply by hand, brush or pump
■ Environmentally safe – non-toxic, non-flammable and non-corrosive
Description
Cat. No.
1-qt. Squeeze bottle
31-378
1-gal. Bucket
31-371
1-qt. Bag (12 bags per bucket)
31-376
1/2-gal. Bag (6 bags per bucket)
31-377
5-gal. Bucket
31-375
55-gal. Drum
31-3855
1-800-435-0705 for Customer Service
www.idealindustries.com
11
Wire Installation
Aqua-Gel® IIP Cable Pulling Lubricant
■ Features the same excellent qualities as Aqua-Gel® II Cable
Pulling Lubricant with a lower viscosity for easy pouring
and pumping
■ Pourable formula clings to cable – eliminates hand application
for a cleaner and safer job
■ Compatible with all cable types
■ Cleans up easily with soap and water
Lubricants
■ Environmentally safe – non-toxic, non-flammable and
non-corrosive
Description
Cat. No.
1-gal. Jug
31-421
5-gal. Bucket
31-425
55-gal. Drum
31-435
Aqua-Gel® CW Cable Pulling Lubricant
■ Features the same excellent qualities as Aqua-Gel® II Cable
Pulling Lubricant with a lower temperature range for use in
cold weather
■ Polymer-based, cold-weather formula remains stable
to -28°F (-33°C)
■ Safe to use on all cable types
■ Cleans up easily with soap and water
■ Clings to cable throughout long pulls
■ Can be diluted with water to customize viscosity for any job
situation
■ Well-suited for hand, pouring or pumping application
■ Environmentally safe — non-toxic, non-flammable and
non-corrosive
Description
Cat. No.
1-qt. Squeeze bottle
31-298
1-gal. Jug
31-291
5-gal. Bucket
31-295
12
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Installation
Cable Gripping Gloves
PVC Heating Blankets
■ Rubber coating provides positive grip
on lubricated cable
■ Comfortable fit
■ Use to heat PVC conduit when making bends
Cat. No.
31-417
Duct Seal
■ Thermostat control provides even heating for uniform bending
■ Narrow internal wire spacing heats PVC conduit faster than
other heating blankets
Conduit Type and Size
1/2 in. to 1-1/2 in. PVC conduit
2 in. to 4 in. PVC conduit
Volts
120
120
Amps
3.2
12
Watts/
Blanket
380
1,435
Cat. No.
74-067
74-068
Noalox® Anti-Oxidant
■ Seals around junction boxes, flashings and service entrances
■ Permanently soft, non-toxic compound can be painted
immediately after application
■ Won’t adversely affect other plastic materials or corrode metals
Description
Cat. No.
1 lb. Block (10 per carton)
31-601
5 lb. Block (10 per carton)
31-605
■ Anti-oxidant and anti-seizing compound improves efficiency
and service life of aluminum-to-aluminum and aluminum-tocopper electrical connections
■ Suspended zinc particles penetrate and cut aluminum oxide
■ Provides additional inter-strand and inter-conductor current
paths for improved conductivity and cooler connections
■ Carrier material excludes air to prevent further oxidation
■ For use with all types of pressure-type wire connectors including
screw-on, tap, service entrance and split-bolt
■ Reduces galling and seizing and promotes good ground
continuity on aluminum conduit joints
Description
1/2-oz. Tube
4-oz. Squeeze bottle
8-oz. Squeeze bottle
8-oz. Brush cap
1-gal. Bucket
5-gal. Bucket
1-800-435-0705 for Customer Service
Cat. No.
30-024
30-026
30-030
30-031
30-032
30-040
www.idealindustries.com
13
Accessories
Description
Rubber-Coated Gloves
Wire Installation
Bender Heads
Bender Putter
■ Exceptional, durable, heat treated materials for extra strength
■ Steel shaft with rubber grip and
conduit bender-shaped head
■ Reinforced at stress points for longer life
■ Markings are raised and cast into the bender body on both sides
for easy visibility
■ Deeply serrated step helps prevent slippage when applying force
■ Grooved internal hook surface helps prevent conduit from slipping
■ Flat hook surface provides stable starting point
■ Includes velour
pouch to protect
head
Description
Cat. No.
Bender Putter
74-999
Conduit Benders
■ Desirable Benfield bending system
Ductile Iron
Pocket Bender Guide
■ Withstands a lifetime of heavy use
■ Convenient pocket-sized reference guide
■ Ductile iron material is stronger than malleable iron
■ Includes simple, concise bending
techniques for precision stubs,
back-to-back, offset and saddle bends
■ Lifetime guarantee
■ Request free booklet #P-100
Handles for Benders and Hickeys
■ Rugged, steel construction
for long-term durability
Conduit
Type and Size
Bender Only
Cat. No.
Bender & Handle
Cat. No.
Handle Only
Cat. No.
1/2 in. EMT
74-001
74-026
74-019
3/4 in. EMT, 1/2 in.
Rigid & 1/2 in. IMC
74-002
74-027
74-019
1 in. EMT, 3/4 in.
Rigid & 3/4 in. IMC
74-003
74-028
74-020
1-1/4 in. EMT, 1 in.
Rigid & 1 in. IMC
74-006
74-034
74-021
■ Baked-on blue enamel finish
resists corrosion and
enhances visibility
■ Convenient bending
guide for offset bends
For Use With
Ductile
Iron Bender
Cat. No.
Ductile
Aluminum
Iron Hickey
Bender
Cat. No.
Cat. No.
Handle Size
Handle
Cat. No.
Aluminum
3/4 in. x 38 in.
74-019
74-001
74-002
74-010
74-011
74-031
74-032
■ Lightweight aluminum for easy handling
1 in. x 44 in.
74-020
74-003
74-012
74-033
1-1/4 in. x 54 in.
74-021
74-006
74-013
74-036
■ Strong enough for every day use
Ductile Iron Hickeys
■ High-strength ductile iron construction
Conduit
Type and Size
Bender Only
Cat. No.
Bender & Handle
Cat. No.
Handle Only
Cat. No.
1/2 in. EMT
74-031
74-046
74-019
3/4 in. EMT, 1/2 in.
Rigid & 1/2 in. IMC
74-032
74-047
74-019
1 in. EMT, 3/4 in.
Rigid & 3/4 in. IMC
74-033
74-048
74-020
1-1/4 in. EMT, 1 in.
Rigid & 1 in. IMC
14
74-036
www.idealindustries.com
74-035
74-021
■ Grooved internal hook helps prevent conduit from slipping
■ Lifetime replacement guarantee
Hickey Only
Cat. No.
Handle Only
Cat. No.
1/2 in. EMT
74-010
74-019
3/4 in. EMT, 1/2 in. Rigid & 1/2 in. IMC
74-011
74-019
1 in. EMT, 3/4 in. Rigid & 3/4 in. IMC
74-012
74-020
1-1/4 in. EMT, 1 in. Rigid & 1 in. IMC
74-013
74-021
Conduit Type and Size
1-800-435-0705 for Customer Service
Wire Installation
Conduit Measuring
Tape
Powr-Fish®
Pull-Line
■ Provides quick and accurate
measurement of conduit runs
■ Continuous-fiber
polyline can be blown
directly into conduit
■ Easy-to-read markings in
sequential one-foot
increments
■ Will not rot or
mildew
■ Pulls rope through raceways
without stretching
■ Dispenser features built-in cutter, handle, non-skid base and
adjustable reel tension
■ Color-coded for
easy location in
conduit
■ Will not rot or mildew
■ Convenient packaging features pre-punched top for easy access
Description
Cat. No.
■ *Knotless to prevent snags in conduit
Conduit Measuring Tape – 3,000 ft.
31-347
Dispenser
31-349
Description
Tensile Strength
Cat. No.
Powr-Fish® Pull-Line – 6,500 ft. (bucket)*
210 lb. min.
31-340
Powr-Fish® Pull-Line – 3,250 ft. (box)*
210 lb. min.
31-341
Powr-Fish® Pull-Line – 10,000 ft. (box)*
210 lb. min.
31-342
Powr-Fish® Pull-Line – 6,500 ft. (box)
210 lb. min.
31-343
Powr-Fish® Pull-Line – 2,200 ft. (bucket)*
500 lb. min.
31-344
Valu-Line™ Pull-Line – 6,500 ft. (bucket)
190 lb. avg.
31-338
Valu-Line™ Pull-Line – 13,000 ft. (bucket)
180 lb. avg.
31-339
Pro-Pull™ Rope
■ Low-friction
polypropylene rope
slides easily through
conduit
■ Non-sliver surface can
be handled without gloves
■ Will not rot or mildew
Hea
Dut vy
500 y
#
Description
Powr-Fish Pull-Line – 2,200 ft. (bucket)*
®
■ Rugged, lightweight construction
Tensile Strength
Cat. No.
500 lb. min.
31-344
Rope Size
Tensile
Strength*
Working
Load**
Cat. No.
1/4 in. x 250 ft. Reel
1/4 in. x 600 ft. Reel
1/4 in. x 1,000 ft. Reel
1,250 lbs.
1,250 lbs.
1,250 Ibs.
125 lbs.
125 lbs.
125 Ibs.
31-839
31-840
31-841
3/8 in. x 250 ft. Reel†
3/8 in. x 600 ft. Reel†
3/8 in. x 1,200 ft. Reel†
2,700 lbs.
2,700 lbs.
2,700 lbs.
300 lbs.
300 lbs.
300 lbs.
31-844
31-845
31-846
1/2 in. x 250 ft. Reel†
1/2 in. x 600 ft. Reel†
1/2 in. x 1,200 ft. Reel†
4,200 lbs.
4,200 lbs.
4,200 Ibs.
466 lbs.
466 lbs.
466 Ibs.
31-849
31-850
31-851
5/8 in. x 600 ft. Reel†
5/8 in. x 1,200 ft. Reel†
6,200 Ibs.
6,200 Ibs.
775 Ibs.
775 Ibs.
31-853
31-854
3/4 in. x 300 ft. Reel†
3/4 in. x 600 ft. Reel†
3/4 in. x 1,200 ft. Reel†
8,500 lbs.
8,500 lbs.
8,500 lbs.
1,214 lbs.
1,214 lbs.
1,214 Ibs.
31-855
31-856
31-857
*Tensile strength indicates the point at which the rope breaks. New rope tensile strengths are based
on tests of new and unused rope of standard construction in accordance with Cordage Institute
Standard Test Methods Specification, August 1978.
**Working load indicates the point at which the rope begins to stretch. Working loads are for rope
in good condition with appropriate splices, in non-critical applications, and under normal service
conditions. Working loads should be exceeded only with expert knowledge of conditions and
professional estimates of risk. Working loads should be reduced where life, limb or valuable
property are involved, or for exceptional service conditions such as shock loads, sustained loads, etc.
†Eye splice on working end.
1-800-435-0705 for Customer Service
www.idealindustries.com
15
Pulling Supplies
■ 160 lb. tensile strength
■ Can be left in
conduit for
future use
Wire Installation
Pulling Supplies
Foam Carriers
Line Packages
■ Attach to a suitable line to serve as a piston – clears out
water or debris as they travel through conduit
■ One-piece pull line and foam tip unwind as they move
through conduit
■ Durable foam construction for repeated use and long life
■ One-piece construction for faster, easier use with no knots
or foam carriers to retrieve
■ For use with any type of blower or vacuum system
■ Line tensile strength of 17 lbs.
■ Available individually or in multi-pack bags
■ For use with any type of blower or vacuum system
Conduit Size (Inches)
Cat. No.
Conduit Size (Inches)
Cat. No.
1/2
31-316
2-1/2
31-322
3/4
31-317
3
31-323
1
31-318
3-1/2
31-324
■ Available individually or in multi-pack bags
Conduit Size (Inches)
Color
Length (Feet)
Cat. No.
1/2
Red
75
31-328
1/2
Red
150
31-329
3/4
Yellow
75
31-330
3/4
Yellow
200
31-331
3/4
Yellow
300
31-332
Cat. No.
3/4
Yellow
450
31-333
31-466
1
White
75
31-334
3/4 in. Foam Carrier, 5-pack bag
31-467
1
White
200
31-335
1 in. Foam Carrier, 5-pack bag
31-468
1
White
300
31-336
1-1/4 in. Foam Carrier, 3-pack bag
31-469
1
White
450
31-337
1-1/2 in. Foam Carrier, 2-pack bag
31-470
2 in. Foam Carrier, 1-pack bag
31-471
1-1/4
31-319
4
31-325
1-1/2
31-320
5
31-326
2
31-321
Description
1/2 in. Foam Carrier, 5-pack bag
16
www.idealindustries.com
6
31-327
Description
Cat. No.
Line Package, 1/2 in. x 75 ft., 10-pack bag
31-472
Line Package, 1/2 in. x 150 ft., 10-pack bag
31-473
Line Package, 3/4 in. x 200 ft., 5-pack bag
31-475
Line Package, 3/4 in. x 300 ft., 5-pack bag
31-476
Line Package, 3/4 in. x 450 ft., 5-pack bag
31-477
Line Package, 1 in. x 200 ft., 5-pack bag
31-479
Line Package, 1 in. x 300 ft., 5-pack bag
31-480
Line Package, 1 in. x 450 ft., 5-pack bag
31-481
1-800-435-0705 for Customer Service
Tools and Totes
C
Engineered to strip every wire right
Kinetic™ Reflex® T ®-Stripper
The newest model from IDEAL. Ergonomic handles and
Santoprene® lined Thumb-Valley™ make this the
premier wire stripper in the market.
Kinetic Super™ Wire Stripper
The ergonomic design and patented Santoprene® grip
wicks away perspiration and reduces muscle fatigue.
The Thumb-Valley™ guide and precision stripping holes
promote the highest accuracy in the industry.
Reflex™ Super T ®-Stripper
Reduce wrist fatigue with our ergonomically designed
Reflex Super T-Stripper with curved handles. These
strippers feature 6/32 and 8/32 self-chasing, bolt-cutting
holes and a locking pawl for safe storage.
Reflex™ Premium T ®-Stripper
Designed for total-comfort, total-control wire stripping.
Ergonomic handles, designed to fit an electrician’s
natural grip, reduce repetitive motion fatigue. Textured,
no-slip sleeves cushion thumb and finger.
Super T ®-Stripper
Traditional T-Stripper features with the added
convenience of bolt-cutting holes. Curved comfort-grip
handles accommodate high-volume wire stripping. A
locking pawl makes for easy storage and transport.
Premium T ®-Stripper
The great benefits of the T-Stripper with added convenience
and comfort. Unique contoured grips provide more comfortable
wire stripping and reduce operator fatigue. Perfect for a wide
variety of applications.
T ®-Stripper
The industry standard for almost 50 years. Compact,
lightweight and easy to use. Features precision-ground,
knife-type blades, built-in looping holes, wire cutters
and a convenient plier nose.
T ®-Stripper Selection Guide
Solid Wire – Yellow Handles
Stranded Wire – Red Handles
NM Cable
8–16
10–18
22–30
Kinetic Reflex™
—
45-915
—
—
45-918
—
—
—
—
—
—
—
Kinetic Super™
45-715
—
—
—
45-718
—
—
—
—
—
—
—
45-621**
T®-Stripper
8–16
16–26
Static Diss.
16–26
Metric
Static Diss.
22–30
.5–4mm
.75–6mm
14/2
12/2
12 & 14
2-Hole
Super Reflex™
45-615
—
—
45-617
45-618
—
45-616
—
—
—
—
Super
45-315
—
—
45-317*
45-318
—
45-316*
45-310-341
45-315-341
—
—
—
Reflex™
—
45-415
45-417
—
45-418
45-416
—
45-425-341
—
45-448
45-449
—
Premium
—
45-215
45-217
—
45-218
45-216
—
—
—
45-248
45-249
45-247
Standard
—
45-120
45-125
—
45-124
45-121
—
45-125-341
45-120-341
—
—
45-246
*Black handles
**Dual 12-2 and 14-2 NM Cable
C-2
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Kinetic™ Super
Wire Stripper
Kinetic™ Reflex® T®-Stripper
Wire Stripper
■ Non-slip Santoprene™ textured grips
■ Plier nose for holding and twisting wires
■ Non-slip Santoprene™ textured grips
■ Slide lock for safety and storage
■ New ergonomic design for maximum control
■ Thumb and finger valley makes stripping easier and more
accurate
■ Strips 6-14 AWG solid & 8-16 AWG stranded wire
■ “Shear-Cut” bolt cutters
Description
Wire Range
Cat. No.
Description
Reflex™ Premium T®-Stripper
10-18 AWG Solid
45-415
Kinetic™ Reflex™ T®-Stripper Wire Stripper
45-915
Kinetic Super™ Wire Stripper
10-18 AWG Solid
45-715
Kinetic™ Reflex™ T -Stripper Wire Stripper
45-918
Kinetic Super™ Wire Stripper
16-26 AWG Stranded
45-716
Kinetic Super™ Wire Stripper
22-30 AWG Solid
45-717
Kinetic Super™ Wire Stripper
8-16 AWG Stranded
45-718
Reflex™ Premium T®-Stripper
Wire Strippers
Cat. No.
®
Reflex™ Super T ®-Stripper
Wire Strippers
■ Ergonomic design for maximum comfort
■ Curved handles to reduce wrist fatigue
■ 6/32 and 8/32 self-chasing screw-cutting holes
■ Sleeves that extend to stripping head to cushion thumb and fingers
■ Locking pawl for safe storage
■ Textured, no-slip sleeves for a sure, easy grip
■ Ergonomic design for maximum comfort
Description
Wire Range
Cat. No.
Reflex™ Premium T®-Stripper
10-18 AWG solid
45-415
Reflex™ Premium T -Stripper
(10 pc. clip strip)
10-18 AWG solid
45-415CS
Reflex™ Premium T®-Stripper
16-26 AWG stranded
45-416
®
■ Curved handles to reduce wrist fatigue
■ Sleeves that extend to stripping head to cushion thumb and fingers
■ Textured sleeves with extra cushioning for added comfort
Wire Range
Cat. No.
45-417
Reflex™ Super T®-Stripper
8-16 AWG solid
45-615
8-16 AWG stranded
45-418
16-26 AWG stranded
45-616
0.5mm2-4.0mm2
45-425-341
Reflex™ Super T®-Stripper
w/static dissipative grips
Reflex™ Premium 14/2 NM Cable T®-Stripper
—
45-448
Reflex™ Super T®-Stripper
w/static dissipative grips
22-30 AWG solid
45-617
Reflex™ Premium 12/2 NM Cable T®-Stripper
—
45-449
Reflex™ Super T -Stripper
8-16 AWG stranded
45-618
Reflex™ Premium T®-Cutter
—
45-423
Reflex™ Super 12/2 & 14/2
NM Cable T®-Stripper
12-2 and 14-2 solid
45-621
Reflex™ Premium T -Stripper
®
Reflex™ Premium T -Stripper
®
Reflex™ Premium T®-Stripper – Metric
1-800-435-0705 for Customer Service
22-30 AWG solid
Description
®
www.idealindustries.com
C-3
Wire Strippers
■ New ergonomic design for maximum control
Wire Preparation
Super T ®-Stripper Wire Strippers—
Static Dissipative
Super T ®-Stripper
Wire Strippers
Wire Strippers
■ Static dissipative grips for dispersing static charge buildup
through the operator to the ground (operator must be
grounded via wrist strap or other grounding device)
Description
Wire Range
Cat. No.
Super T -6 T -Stripper
w/static dissipative grips
16-26 AWG stranded
45-316
Super T®-7 T®-Stripper
w/static dissipative grips
22-30 AWG solid
45-317
®
■ 6-32 and 8-32 self-chasing screw-cutting holes
(not available on metric stripper)
®
■ Curved, cushion-grip handles for ergonomic comfort
■ Locking pawl to keep stripper in closed position
Description
Data T®-Cutter
Wire Range
Cat. No.
Super T®-5 T®-Stripper
8-16 AWG solid
45-315
Super T®-8 T®-Stripper
8-16 AWG stranded
45-318
Super T -Stripper – Metric
0.5-4mm
45-310-341
Super T®-Stripper – Metric
0.75-6mm2
45-315-341
Super T®-Stripper – Metric
0.5-4mm2
45-317-341
®
2
NM Cable T ®-Stripper
Wire Strippers
■ Cuts round communication cable and maintains cable geometry
for better cable performance
■ Easy, one-step stripping of outer jacket of NM cable —
no slitting required
■ Versatility to strip, cut and loop conductor wires with
precision and ease
C-4
www.idealindustries.com
■ Suitable for soft cables (not ACSR)
■ Steel reinforced center conductors can be trimmed with bolt
cutting holes
■ Stripping holes for 12 or 14 AWG solid wire
Description
14/2 NM Cable T®-Stripper
14/2 NM Cable T®-Stripper (10 pc. clip strip)
12/2 NM Cable T®-Stripper
12/2 NM Cable T®-Stripper (10 pc. clip strip)
Reflex™ Premium 14/2 NM Cable T®-Stripper
Reflex™ Premium 12/2 NM Cable T®-Stripper
Reflex™ Super 12/2 & 14/2 NM Cable T®-Stripper
■ Cuts multi-pair cable up to .500 in. (12.7mm) and coaxial cable
up to RG-9/U
■ Cushioned comfort grip handles
Cat. No.
45-248
45-248CS
45-249
45-249CS
45-448
45-449
45-621
■ Locking latch keeps tool closed in pouch
■ Data T®-Cutter II designed for RG-58 and RG-6 coaxial cable
Description
Cat. No.
Data T®-Cutter
45-074
Data T -Cutter II
45-075
®
1-800-435-0705 for Customer Service
Tools and Totes
■ Stripping holes for stripping two 12 AWG or two 14 AWG
wires simultaneously
■ Ability to strip both conductor wires of NM cable at one time
■ Contoured, comfort grip handles on Premium model
■ Contoured, comfort-grip handles to reduce operator fatigue
Description
Premium T -14 T -Stripper
®
®
Cat. No.
Premium T -5 T -Stripper
10-18 AWG solid
45-215
Cat. No.
Premium T®-6 T®-Stripper
16-26 AWG stranded
45-216
12 or 14 AWG solid
45-246
Premium T®-7 T®-Stripper
22-30 AWG solid
45-217
45-247
Premium T -8 T -Stripper
8-16 AWG stranded
45-218
Description
T®-12 T®-Stripper
Wire Range
Wire Range
®
12 or 14 AWG solid
T ®-Stripper
Wire Strippers
®
®
®
T ®-Cutter Wire Cutters
■ Form-ground, knife-type blades for accurate, easy stripping
without nicking insulation
■ Hardened steel, sheer-type blades
■ Built-in wire cutter and looping holes
■ Spring-loaded automatic opening
■ Convenient plier nose for extra gripping strength
■ Convenient plier nose for extra gripping strength
■ Laser-etched wire gauge for easy-to-read visibility
■ Corrosion-resistant, black oxide finish
■ Spring-loaded automatic opening
■ Tough steel construction
■ Corrosion-resistant, black oxide finish
■ Locking tab keeps spring in place
■ Tough steel construction
■ Locking tabs keep spring in place
Description
Wire Range
Cat. No.
T®-5 T®-Stripper
10-18 AWG solid
45-120
T -6 T -Stripper
16-26 AWG stranded
45-121
T®-7 T®-Stripper
22-30 AWG solid
45-125
T®-8 T®-Stripper
8-16 AWG stranded
45-124
T -Stripper – Metric
0.75-6mm
45-120-341
T®-Stripper – Metric
0.5-4mm2
45-125-341
T®-6T®-Stripper (10 pc. clip strip)
10-18 AWG solid
45-120CS
T®-5T®-Stripper (10 pc. clip strip)
16-26 AWG stranded
45-121CS
®
®
®
2
1-800-435-0705 for Customer Service
■ Premium model features comfort-grip handles; Super model
features curved cushion-grip handles; Reflex™ Premium model
features ergonomic design with textured cushion-grip handles
Description
Wire Range
Cat. No.
T®-Cutter
Up to 1/2 in. O.D. fine-stranded wire
and 10 AWG solid wire
45-123
Premium T®-Cutter
Up to 1/2 in. O.D. fine-stranded wire
and 10 AWG solid wire
45-223
Super T®-Cutter
w/static dissipative grips
Up to 1/2 in. O.D. fine-stranded wire
and 10 AWG solid wire
45-323
Reflex™ Premium
T®-Cutter
Up to 1/2 in. O.D. fine-stranded wire
and 10 AWG solid wire
45-423
www.idealindustries.com
C-5
Wire Strippers
Premium T ®-Stripper
Wire Strippers
NM Cable Dual-Hole T ®-Stripper
Wire Strippers
Wire Preparation
Seven-In-One Stripper
Combo Tool
Wire Strippers
■ Convenient, four-function tool features precision-ground
stripping holes and knife-to-anvil cutting blades
■ Crimps bare and insulated terminals
■ Versatile, seven-function tool features precision-ground stripping
blades, cushioned grips and plier nose
■ Strips 8 to 16 AWG solid and 10 to 18 AWG stranded wire
■ Strips 8 to 20 AWG solid and 10 to 22 AWG stranded wire
■ Crimps bare and insulated terminals for 10 to 22 AWG wire, RG-59
coax connectors and 7 to 8mm auto ignition connectors
■ Cuts unhardened bolts (4-40, 6-32, 8-32, 10-24 and 10-32)
and reforms threads
■ Cuts unhardened wire, bolts and screws (4-40, 6-32, 8-32, 10-24
and 10-32) and reforms threads
■ Cushioned, comfort-grip handles
■ Cuts stranded, solid, Romex® and U.F. wire to 8 AWG
■ Reams and de-burrs conduit
Description
Cat. No.
■ Gauges and loops wire
Combo Tool
30-428
■ Cushioned, comfort-grip handles
V-Notch Stripper
Description
Cat. No.
Seven-In-One Stripper
45-777
Coax Strip and Crimp Tool
■ Cuts copper or aluminum wire, solid or stranded
■ Rotating cam wheel adjusts to strip 10-24 AWG wire
■ Looping holes for solid wire
■ Locking hasp
Description
Cat. No.
V-Notch Stripper
45-101
■ Precision, form-ground stripping holes remove outer jacket and
insulation from RG-59 and RG-6 coaxial cable
■ Durable blades cut copper-coated steel conductors
Multi-Crimp Strip Tool
■ Three crimping nests for crimping F-connectors and ring terminals
■ Cushioned, comfort-grip handles
■ Cuts wire
Description
Cat. No.
Coax Strip & Crimp Tool
30-433
Coax Strip & Crimp Tool w/F-Connectors
30-433F
■ Crimps insulated and non-insulated wires
■ Cuts bolts
■ Strips 10 - 22 AWG wire
Description
Cat. No.
Multi-Crimp Strip Tool
45-778
C-6
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Cable Rippers
Grip-N-Strip™
End Stripper
■ Self-adjusting stripping blades
automatically select proper position
45-118
■ Slits cable sheathing before stripping wires
■ Strips 12 AWG solid to 20 AWG
stranded PVC insulated wire
■ Quick, clean and easy end or mid-run removal of jacket
■ Dual strip-length gauge marks at
3/16 in. and 5/16 in.
■ Convenient built-in wire gauge
■ Cuts up to 12 AWG solid wire
Description
Cat. No.
Standard Cable Ripper
45-018
Side Entry Cable Ripper
45-118
■ Lightweight, ergonomic design
reduces user fatigue
■ Reinforced fiberglass construction
■ Hardened steel blades for extra strength and longer life
Handi-Grip™ Wire Skinner
Description
Cat. No.
■ Cuts and strips insulation
Grip-N-Strip™ End Stripper
45-227
■ Scrapes wire and straightens
kinks and sharp bends
Replacement blade set
LB-1501
Maxim Wire Stripper
■ Strips enamel, Formvar and Formex
Description
Cat. No.
Handi-Grip™ Wire Skinner
45-021
Replacement blade set
L-554
Swivel-Blade®
Cable Stripper
■ Uses 33 blades within each
jaw to self-adjust and conform
to the profile of different
wire sizes and insulation
densities
■ Self-adjusting blades
strip 10 to 26 AWG solid or stranded wire
■ Built-in wire cutter
■ For end or center
stripping of coaxial
and power cables from
3/4 in. to 1-1/2 in. O.D.
■ Strip length adjusts from 1/8 in. to 3/4 in.
■ Reinforced fiberglass construction
■ Strips insulation to 5/32 in. including PVC, rubber, Neoprene,
TEFLON®,polyethylene, Nylon, Kapton, fiberglass and fabric
Description
Maxim Wire Stripper
45-327
■ Spare blade in handle
Replacement blade set
LA-2524
Description
Cat. No.
Cable Stripper for 3/4 in. to 1-1/2 in. O.D.
45-129
Cable Stripper for 1/4 in. to 3/4 in. O.D.
45-128
Underground Feeder
(UF) Cable Stripper
Rotary BX/MC Cutter
■ Self-adjusting stripping blades
automatically select
proper position
■ Handles all common BX,
MC and Flex cables
■ Strips 12 AWG solid to
14 AWG Underground
Feeder (UF) Cable
■ Blue sapphire blade cuts armor without
damage to internal conductors
Cat. No.
■ Strips Twin and Earth
cable
■ Splices cleanly through
casings with only a
few turns
■ Open-throat construction allows unlimited strip length
■ Thumbscrew holds cable securely in place
■ Neatly removes outer cable sheath and then inner wire
sheathing to desired lengths
■ Epoxy-coated to resist corrosion
■ Lightweight, ergonomic design reduces user fatigue
■ Handle knob stores up to six replacement blades
■ Replaceable blades
Description
Cat. No.
Description
Cat. No.
Rotary BX/MC Cutter
35-780
Underground Feeder Cable Stripper
45-235
Replacement blades (5 per pack)
35-781
Replacement blade set
45-234
1-800-435-0705 for Customer Service
www.idealindustries.com
C-7
Wire Strippers
45-018
Custom Stripmaster® and Custom Stripmaster® Lite Wire Strippers
■ Strips 30 through 10 AWG solid or stranded wire
■ Mil-spec die-type blades allow precision stripping
Custom
Stripmaster®
■ Inner cutting hole sized to conductor and counter-bored holes sized to insulation
■ Replaceable Grippers
■ Optional short stop latch and transparent wire stop
■ Cushioned, comfort grip handles
Wire Strippers
Custom
Stripmaster®
Lite
■ Custom Stripmaster® Lite is 3/4’s the size of Custom Stripmaster® Wire Stripper
and strips 16 through 30 AWG solid or stranded wire
■ Custom Stripmaster® Lite requires one-third less hand pressure for each strip
actuation
■ Engineering Service and made-to-order blades available.
Contact factory for complete product and blade number listing
Gripper pads hold the wire securely in
a centerline relationship with the blade.
Die-type blades incorporate a counter-bored hole sized to the
insulation and an inner cutting hole sized to the conductor.
This varies depending on insulation type and thickness.
Custom Stripmaster® Wire Strippers and Die-Type Blades
Cutting Hole Diameter
(Inches)
Counterbore Diameter
Wire Size AWG
22
20
18
16
Specifications —
30
28
26
24
14
12
10
Stripper
Cat. No.
Blade Only
Cat. No.
.076
.0935
.096
.113
.119
.136
45-176
L-5559
45-177
L-5560
45-178
L-5561
45-173
L-5562
45-174
L-5563
45-175
L-5564
45-170
L-5210
45-171
L-5211
45-172
L-5436
Three identical holes
45-179
L-7625
Solid Wires
45-169
L-9300
®
For Type E Teflon (600V)
.023
.039
.016
.019
.023
.032
.035
.039
For Type EE Teflon® (1000V)
.028
.043
.034
.052
.042
.0595
.052
.070
.061
.081
.076
.104
.023
.0465
.016
.019
.023
.042
.043
.0465
For Other Misc. Insulations
.028
.055
.034
.0595
.042
.067
.052
.0785
.035
.0635
.042
.073
Tolerances: Cutter Dia.: ± .001; Counter-bore Dia.: ± .002
The 45-170 Series is a Custom Stripmaster® Wire Stripper frame without the short
stop latch and wire stop.
C-8
www.idealindustries.com
.052
.086
.119
.144
.061
.089
.076
.113
.022
.0292
.052
.0595
.016
.020
.024
.037
.040
.043
For Wire Wrap & Other Thin Insulated Wire
.012
.020
.012
.014
.018
.024
.019
.023
.025
.033
.096
.125
.0937
.138
.062
.096
.116
.154
45-169 through 45-188 include grit-type pads (standard).
45-369 through 45-388 include file-type pads.
45-469 through 45-488 include parallel-type pads.
1-800-435-0705 for Customer Service
Tools and Totes
30
Cutting Hole Diameter
Specifications — Counterbore Diameter (Inches)
Wire Size AWG
26
24
22
20
28
18
16
Stripper
Cat. No.
Blade Only
Cat. No.
.052
.070
.061
.081
45-638
LB-918
45-639
LB-919
45-640
LB-920
45-635
LB-915
45-636
LB-916
45-637
LB-917
45-632
LB-912
45-633
LB-913
45-634
LB-914
45-641
LB-921
45-631
LB-911
MIL-W-16878 Type E 600V Teflon® Wire
.023
.039
.016
.019
.023
.032
.035
.039
MIL-W-16878 Type EE 1000V Teflon® Wire
.023
.0465
.023
.0465
.016
.019
.042
.043
General Purpose
.034
.052
.034
.052
.028
.043
.028
.043
.028
.055
.028
.055
.042
.0595
.042
.0595
.034
.0595
.034
.0595
.042
.067
.042
.067
.035
.0635
.035
.0635
.052
.0785
.042
.073
.042
.073
.061
.089
.052
.086
.062
.096
.022
.0292
.052
.0595
.016
.020
.024
.0292
.037
.040
.043
.0595
Wire Wrapping (Thin Insulation Solid Wire)
.012
Four holes, same size
.020
.012
.014
.018
.024
Solid Wires
.019
.023
.025
.033
Tolerances: Cutter Dia.: ± .001; Counterbore Dia.: ± .002. Teflon® is a registered trademark of E.I. du Pont de Nemours and Company.
Custom Stripmaster® Wire Strippers and Die-Type Blades
0.05
0.08
0.13
Cutting Hole Diameter
Specifications — Counterbore Diameter (Millimeters)
mm2 Nom
0.2
0.22
0.5
1.0
1.5
2.5
4.0
6.0
Stripper
Cat. No.
Blade Only
Cat. No.
1.93
2.37
2.44
2.87
3.02
3.45
45-176
L-5559
45-177
L-5560
45-178
L-5561
45-173
L-5562
45-174
L-5563
45-175
L-5564
45-170
L-5210
45-171
L-5211
45-172
L-5436
45-179
L-7625
45-169
L-9300
®
For Type E Teflon (600V)
.584
.99
.406
.482
.584
.813
.889
.99
For Type EE Teflon® (1000V)
.711
1.09
.863
1.32
1.07
1.5
1.33
1.78
1.55
2.06
1.93
2.64
.584
1.17
.406
.482
.584
1.07
1.09
1.17
For Other Misc. Insulations
.711
1.39
.863
1.5
1.07
1.70
1.33
1.99
1-800-435-0705 for Customer Service
1.07
1.85
1.33
2.18
3.02
3.6
1.55
2.49
1.93
2.87
.560
.736
.889
1.33
1.5
1.61
.406
.508
.609
.940
1.01
1.09
For Wire Wrap & Other Thin Insulated Wire
.305
.508
.305
.356
.457
.609
.482
.584
.635
.838
Tolerances: Cutter Dia.: ± .025mm; Counterbore Dia.: ± .051mm
2.44
3.17
2.38
3.45
1.57
2.44
Three identical holes
2.94
3.91
www.idealindustries.com
C-9
Wire Strippers
Custom Stripmaster® Lite Wire Strippers and Die-type Blades
Custom Stripmaster® Lite Wire Strippers and Die-type Blades
1,5
1,0
Cutting Hole Diameter
Specifications — Counterbore Diameter (Millimeters)
Wire Size AWG
0,5
0,22
0,2
0,13
MIL-W-16878 Type E 600V Teflon® Wire
1,55
1,32
1,07
2,06
1,99
1,51
1,07
1,51
Wire Strippers
MIL-W-16878 Type EE 1000V Teflon Wire
1,55
1,32
1,07
2,26
1,99
1,70
1,07
1,70
0,86
1,32
0,86
1,32
0,71
1,09
0,71
1,09
0,58
,099
0,58
0,99
0,08
0,48
0,89
0,05
0,41
0,82
Stripper
Cat. No.
Blade Only
Cat. No.
45-638
LB-918
45-639
LB-919
45-640
LB-920
45-635
LB-915
45-636
LB-916
45-637
LB-917
45-632
LB-912
45-633
LB-913
45-634
LB-914
45-641
LB-921
45-631
LB-911
®
General Purpose
1,57
1,32
2,44
2,18
1,07
1,85
1,07
1,85
0,86
1,51
0,86
1,51
0,89
1,61
0,89
1,61
0,71
1,40
0,71
1,40
0,74
1,51
0,74
1,51
0,58
1,18
0,58
1,18
0,56
1,32
0,61
1,09
0,48
1,09
0,51
1,02
0,41
1,07
0,41
0,86
Wire Wrapping (Thin Insulation Solid Wire)
0,30
0,76
0,61
0,46
0,36
0,30
Solid Wires
0,84
0,64
0,58
0,48
Tolerances: Cutter Dia.: ± .001; Counterbore Dia.: ± .002. Teflon® is a registered trademark of E.I. du Pont de Nemours and Company.
Four holes, same size
C-10
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Stationary Gripper for Red
Handle Units
For 10, 12 & 14 AWG Wire
L-5215
.129
For 16 thru 30 AWG wire.
Short-stop Latch protects wire strands by
limiting the stripping stroke to 5/32 in. and
retains the slug until the wire is ready
for terminating.
Gripper Pads are available in your choice of
either parallel, file or grit-type. File-type pads
may be used on hard-to-grip insulations such as
Kapton® and some Teflon®.
Transparent wire stop provides
uniform stripping length.
Replacement Gripper Pads
L-5217
.156
Replacement Frame Assemblies
For Custom Stripmaster® and Custom Steel Stripmaster® Wire Strippers
For Custom Stripmaster Wire Strippers
Cat. No.
Surface
Type
Frame only, 10-14 AWG
L-5616
Frame only, 16-30 AWG
L-5617
Frame only, 10-14 AWG, Wire Stop and Latch
L-5618
Frame only, 16-30 AWG, Wire Stop and Latch
L-5619
Frame only, 10-14 AWG, internal spring (see note)
L-9039
Frame only, 16-30 AWG, internal spring (see note)
L-9038
®
Gripper Set*
Cat. No.
Movable Gripper
Cat No.
Stationary Gripper
(Thickness)
Grit**
LB-197
L-5212
L-5215 (.129 in.)
Grit**
LB-198†
L-5212
L-5217 (.156 in.)
File
LB-721
LB-718
LB-719 (.129 in.)
File
LB-722‡
LB-718
LB-720 (.156 in.)
Parallel
LB-730
LB-727
LB-728 (.129 in.)
Parallel
LB-731
LB-727
LB-729 (.156 in.)
Note: Frames with internal springs allow additional blade penetration pressure for
difficult, and multi-layered insulation types.
For Custom Stripmaster® Lite Wire Strippers
Surface
Type
Gripper Set*
Cat No.
Movable Gripper
Cat. No.
Stationary Gripper
(Thickness)
Grit*
LB-1188
LB-882
LB-883 (.109 in.)
File
LB-1189
LB-1184
LB-1185 (.109 in.)
Parallel
LB-1190
LB-1186
LB-1187 (1.09 in.)
* Gripper Set includes one movable gripper, one stationary gripper.
** Grit pads are standard for most Custom Stripmaster® and Custom Stripmaster® Lite
products.
† Formerly L-7954
‡ Formerly L-8928. These are for use on hard-to-grip surfaces such as Kapton® and Teflon®.
Gripper pad selection depends on insulation type and user preference.
Note: For wire gauge 10-14, use .129 in. stationary gripper. For 16-30 AWG, use .156 in.
gripper.
For Custom Stripmaster® Lite Wire Strippers
Cat. No.
Frame only
LB-895
Frame only, Wire Stop and Latch
LB-896
For Custom Steel Stripmaster® Wire Strippers
Cat. No.
Frame only, 10-14 AWG
LB-1091
Frame only, 16-30 AWG
LB-1092
Frame only, 10-14 AWG, internal spring (see note)
LB-1090
Frame only, 16-30 AWG, internal spring (see note)
LB-1089
Note: Frames with internal springs allow additional blade penetration pressure for
difficult, and multi-layered insulation types.
Optional Accessories
Short Stop Latch
Cat. No.
Transparent Adjustable Wire Stop Assembly
Cat. No.
For Custom & Custom Steel Stripmaster® Wire Strippers
L-5269
For Custom & Custom Steel Stripmaster® Wire Strippers
L-5270
For Custom Stripmaster® Lite Wire Strippers
LB-1194
For Custom Stripmaster Lite Wire Strippers
LB-1195
®
Custom Steel Stripmaster® Wire Strippers and Special Flat-Blades for Ribbon and Multi-Conductor Cable
Description
Blade Gap ("x") vertical height
Blade Only Cat. No.
Frame & Blade Cat. No.
NA
NA
LB-1091
Flat blade for 26 AWG (.40mm dia.) multi-conductor
.022 in.
LB-1151
45-890
Flat blade for 24 AWG (.00mm dia.) multi-conductor
.030 in.
LB-1152
45-891
Flat blade for 22 AWG (.64mm dia.) multi-conductor
.038 in.
LB-1153
45-892
Flat blade for 20 AWG (.00mm dia.) multi-conductor
.050 in.
LB-1154
45-893
Flat blade for 18 AWG (1.02mm dia.) multi-conductor
.060 in.
LB-1155
45-894
Flat blade for 16 AWG (1.29mm dia.) multi-conductor
.075 in.
LB-1156
45-895
Custom Steel frame only
Teflon® and Kapton® are registered trademarks of E. I. du Pont de Nemours and Company.
1-800-435-0705 for Customer Service
www.idealindustries.com
C-11
Wire Strippers
Stationary Gripper for Black
Handle Units
Wire Preparation
Stripmaster® and Stripmaster® Lite Wire Strippers
■ One-step stripping enhances productivity
Stripmaster®
■ Spring-action motion increases leverage and reduces operator fatigue
■ Precision-ground, knife-type blades provide clean, accurate stripping
Stripmaster®
Lite
■ Sturdy die cast frame provides long-term durability
■ Wire gripper holds wire securely in position
■ Stripmaster® Lite designed for smaller hands — 3/4 the size
of the standard Stripmaster®
Wire Strippers
Stripmaster® Wire Strippers and Knife-Type Blades
Specifications — Stripping Hole Diameter (Inches)
Wire Size AWG
14
16
18
20
22
24
8
10
12
.159
.141
.106
.144
.105
.085
.073
.073
.144
.113
.090
.072
.061
.048
.048
.090
.072
.061
.039
.039
.072
.061
.048
.039
.032
.026
.048
.039
.032
.026
.062
.055
.198
*Boxed
.167
26
28
30
.021
Replacement
Blades (Pair)
Cat. No.
Cat. No.
45-090 or 45-290
L-4419
45-091
L-4420
45-092* or 45-292**
L-4421
45-093
L-4422
45-097
L-4994
.016
45-098
L-5361
45-099
L-8763
**Blister Card
Tolerances A.001 -.005
Stripmaster Lite Wire Strippers and Knife-Type Blades
®
12
14
16
18
.072
.061
Specifications — Stripping Hole Diameter (Inches)
Wire Size AWG
20
22
24
26
28
30
.048
.090
.072
.096
.085
.073
20/22
Cutting Edge
Cat. No.
.039
.032
.113
16/18
.026
.021
.016
.061 (All stranded wire)
.061 (12 & 14 Solid wire, 16 & 18 Stranded wire)
.072
.048
.250 Wide
Replacement
Blades (Pair)
Cat. No.
45-671
LB-1001
45-672
LB-1002
45-673
LB-1003
45-674
LB-1004
45-675
LB-1005
Tolerances A.001 -.005
Stripmaster® Wire Strippers with
Rectangular Holes
Coax Stripmaster® Wire Strippers and Blades
Description
Coax Cable
Type (RGU)
Repl. Blade
Cat. No.
Cat. No.
RG-6
LB-740
45-262
Description
For Flat Telephone Cable
(.60 in. or 1.52mm)
Coax Stripmaster® for RG-6
Coax Stripmaster for RG-58
RG-58
LB-742
45-264
Coax Stripmaster® for RG-59
RG-59
LB-743
45-265
Coax Stripmaster® for RG-62
RG-62
LB-744
45-266
RG-6
QuadShield
LA-3953
45-282
®
Coax Stripmaster® for RG-6 QuadShield
Coaxial Cables: two-step strip for
termination, jacket and dielectric.
Cat. No.
Replacement
Blades (Pair)
Cat. No.
N/A
LB-1155
For European Flat Lamp Cord
45-089
L-8762
For SP-SPT Lamp Cord
45-095*
L-4452
*Also strips 2- and 3-conductor low-voltage wire used in G.E. and Touchplate remote control
wiring system
Optional Accessories
Cat. No.
Transparent Adjustable Wire Stop (for Stripmaster® Wire Strippers)
L-5270
Transparent Adjustable Wire Stop (for Stripmaster Lite Wire Strippers)
LB-1195
Replacement Movemable Gripper
L-1953
®
C-12
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
8
4
5
10
12
Specifications — Stripping Hole Diameter (mm)
Wire Size AWG
14
16
18
20
22
24
26
3.6
2.7
3.6
2.7
2.2
1.8
3.6
2.9
2.3
1.8
1.5
1.2
2.3
1.8
1.5
1.2
1
1.8
1.5
1.2
1
0.8
0.7
1.2
1
0.8
0.7
4.2
1.6
28
30
0.5
0.4
1.4
Replacement
Blades (Pair)
Cat. No.
Replacement
Frame
Cat. No.
45-090 or
45-290
L-4419
L-5620
45-091
L-4420
L-5620
45-092 or
45-292-241
L-4421
L-5620
45-093
L-4422
L-5620
Cat. No.
45-097
L-4994
L-5620
45-098
L-5361
L-5620
45-099
L-8763
L-5620
Cat. No.
Replacement
Blades (Pair)
Cat. No.
Replacement
Frame
Cat. No.
45-671
LB-1001
LB-1421
Stripmaster® Lite Wire Strippers and Knife-Type Blades
12
14
16
1.8
Specifications — Stripping Hole Diameter (mm)
Wire Size AWG
18
20
22
24
26
28
30
1.5
1.2
1
0.8
0.7
0.5
16/18
20/22
Cutting Edge
45-672
LB-1002
LB-1421
2.9
2.3
1.8
1.5 (All stranded wire)
0.4
45-673
LB-1003
LB-1421
2.4
2.2
1.9
1.5 (12 & 14 Solid wire, 16 & 18 Stranded wire)
45-674
LB-1004
LB-1421
45-675
LB-1005
LB-1421
10
Cat. No.
Replacement
Blades (Pair)
Cat. No.
Replacement
Frame
Cat. No.
5
45-090-341 or
45-290-341
L-4419M
LA-2358
45-092-341 or
45-292-341
L-4421M
LA-2358
45-098-341 or
45-298-341
L-5361M
LA-2358
Replacement
Frame
Cat. No.
1.8
1.2
6.4 wide
Stripmaster® Wire Strippers and Knife-Type Blades for Metric Wire
0.05
0.1
0.15
Specifications—Stripping Hole Diameter (mm)
Wire Size (mm2)
0.22 0.34
0.5
0.75
1
1.5
2.5
4
6
8
4.3
1.3
0.6
0.7
0.8
0.9
1
1.6
1.9
2.4
3
3.6
1.1
Stripmaster® Lite Wire Strippers and Knife-Type Blades for Metric Wire
0.05
0.6
0.1
0.7
Specifications—Stripping Hole Diameter (mm)
Wire Size (mm2)
0.15
0.22
0.34
0.5
0.75
1
1.5
Cat. No.
Replacement
Blades (Pair)
Cat. No.
1
1.6
1.9
45-671-341
LB-1001M
H-2909
45-672-341
LB-1002M
H-2909
0.8
1.1
1.3
0.9
Free Application Engineering Service and made-to-order Custom Stripmaster® and Stripmaster® Wire Strippers are available.
Contact IDEAL INDUSTRIES, INC. for complete information at 1-800-435-0705.
1-800-435-0705 for Customer Service
www.idealindustries.com
C-13
Wire Strippers
Stripmaster® Wire Strippers and Knife-Type Blades
Wire Preparation
IDEAL Grips
Premium Electrician’s
Side-Cutting Pliers
Dipped Grips
Smart-Grip™
G
Honreat
Awaors
rd
1000V Insulated
Grips
All of the features of the Side-Cutting Pliers plus:
Pliers
Dipped Grips — The industry standard for decades, our vinyl-coated
handles provide a secure, comfortable grip. This classic design offers
traditional functionality professionals have grown familiar with. Our
standard catalog part numbers come with dipped grips.
Smart-Grip™ — Our new Smart-Grip™ pliers provide the latest
innovation in material, design, durability and comfort. The underlying
material is extra tough, providing durability and long life. The softer,
comfort oldermold improves tool control while giving a slip-proof
ergonomic alternative to our dipped handles. Our special Santoprene™
material is resistant to perspiration, water, oil and chemicals and provides
a sure grip even when wet. Our grips are color-coded on the ends, so
each tool can be quickly and easily identified when in a tool pouch or
pocket. In addition, identification markers on the insides of the handles
make it easy to find the right tool even by touch. Smart-Grip™ pliers are
listed in a separate chart and have a prefix of “3” in the catalog number.
■ Mirror-polished finish to resist rust and maintain
premium appearance
■ Double-dipped grips for extra cushioning comfort
■ Lifetime guarantee
Description
Cat. No.
9-1/4 in. New England high-leverage
w/fish tape puller and crimping die
30-435
Tongue and Groove Pliers
Side-Cutting Pliers
■ Patented undercut tongue and groove design
ensures solid grip
■ Patented reinforced flange protects against
breakage
■ Laser-hardened teeth remain sharp longer
■ Drop-forged, high-carbon steel construction
30-420
30-430
35-013
35-012
■ Drop-forged, high-carbon steel construction withstands
toughest applications
■ Cuts hardened wire, bolts and ACSR
■ Induction-hardened blades and serrated jaws for long-term durability
■ High-leverage design provides 40% more cutting power
■ Unique reverse rivet protects smooth action of plier movement
■ Models with crimping die crimp bare and insulated terminals
■ Vinyl-coated, comfort-grip handles for a secure grip
■ Vinyl-coated, comfort-grip handles for a secure grip
■ Lifetime guarantee
Description
6-1/2 in. Tongue & Groove Pliers
9-1/2 in. Tongue & Groove Pliers
10 in. Tongue & Groove Pliers
12 in. Tongue & Groove Pliers
16 in. Tongue & Groove Pliers
Jaw Opening
(Inches)
Cat. No.
7/8
1-1/2
2
2-1/4
4-1/4
35-426
35-420
35-430
35-440
35-460
Smart-Grip™
■ Lifetime guarantee
Jaw Opening
(Inches)
Cat. No.
1-1/2
2
35-3420
35-3430
Description
Cat. No.
8-1/2 in. New England nose high-leverage w/crimping die
30-420
9-1/4 in. New England nose high-leverage w/fish tape puller
35-012
9-1/4 in. New England nose high-leverage w/crimping die
30-430
9-1/4 in. New England nose high-leverage w/box joint
35-013
CAUTION: Never use pliers or cutters on live electrical circuits.
Description
Cat. No.
WARNING: The cushion grips on handles are for comfort, NOT protection against
electrical shock and should not be used on live circuits.
9-1/4 in. New England nose high-leverage w/fish tape puller
35-3012
9-1/4 in. New England nose high-leverage w/crimping die
30-3430
Smart-Grip™
C-14
www.idealindustries.com
Description
9-1/2 in. Tongue & Groove Pliers w/heavy-duty grips
10 in. Tongue & Groove Pliers w/heavy-duty grips
WARNING: Plastic-dipped or slip-on handles NOT for protection against electrical
shock.
1-800-435-0705 for Customer Service
Tools and Totes
Long-Nose Pliers
Diagonal-Cutting
Pliers
■ Narrow profile head designed for working in tight areas
■ Drop-forged, high-carbon steel construction
Angled Head
35-029/35-3029
■ Knife-to-anvil blades never need resharpening
■ Induction-hardened blades cut hardened wire, bolts and ASCR
■ Vinyl-coated, comfort-grip handles for a secure grip
■ Drop-forged, high-carbon steel construction withstands
toughest applications
■ Lifetime guarantee
■ Knife-to-anvil blades never need resharpening
Description
Cat. No.
■ Induction-hardened blades cut hardened wire, bolts and ASCR
6 in.
35-036
■ Vinyl-coated, comfort-grip handles for a secure grip
7-3/4 in.
35-037
■ High-leverage design provides 40% more cutting power
8-1/2 in.
35-038
8-1/2 in. w/Cutter & stripping holes for 12 & 14 AWG wire
35-039
■ Models 35-029 and 35-029HD feature a convenient angled
head for hard-to-reach areas and rocking out nails
■ Lifetime guarantee
Smart-Grip™
Description
Cat. No.
Description
Cat. No.
7-3/4 in.
35-3037
6 in.
35-026
8-1/2 in.
35-3038
7 in.
35-027
8 in. High-leverage
35-028
8 in. High-leverage w/angled head
35-029
Multi-Crimp Tool
Smart-Grip™
■ Crimps bare or insulated terminals and splices
on 10 to 22 AWG wire
Description
Cat. No.
8 in. High-leverage
35-3028
8 in. High-leverage w/angled head
35-3029
Cable Cutter
■ Knife-to-anvil blades never need resharpening
■ Excellent leverage for easy crimping and cutting
■ Drop-forged, high-carbon steel construction
■ Vinyl-coated handles provide a solid, comfortable grip
■ Lifetime guarantee
Description
Cat. No.
9-3/4 in. Multi-Crimp Tool
30-429
Smart-Grip™
■ Drop-forged, high-carbon steel construction
Description
Cat. No.
■ Precision-ground, hardened cutting edges provide accurate cuts
without cable distortion
9-3/4 in. Multi-Crimp Tool
30-3429
■ Designed for maximum leverage with minimum effort
■ Cuts 2/0 aluminum and copper
Tenite Grips
■ Vinyl-coated, comfort-grip handles
■ Lifetime guarantee
Description
Cat. No.
35-052
Description
Cat. No.
9-1/2 in. Cable Cutter
Replacement grips for 6 in. pliers
35-006
Smart-Grip™
Replacement grips for 7 in. pliers
35-007
Description
Cat. No.
Replacement grips for 8 in. or 9 in. pliers
35-008
9-1/2 in. Cable Cutter w/heavy-duty grips
35-3052
1-800-435-0705 for Customer Service
www.idealindustries.com
C-15
Pliers, Cable Cutters
■ Serrated jaws provide secure gripping surface
Wire Preparation
Crimp Tools
Crimp Tool
Heavy-Duty Crimp Tool
■ Crimps all IDEAL crimp sleeves
■ Crimp nests for 2, 4, 6 or 8 AWG and 8-38 mm2 uninsulated
terminals
■ Excellent leverage for right-angle, double-indent crimps
■ Rotating crimp nests eliminate costly die changes
■ Cuts and twists wire
■ Decimal and metric wire sizes clearly marked on each crimp nest
■ Vinyl-coated handles provide a solid, comfortable grip
■ Comfort-grip handles for a secure grip
■ Lifetime guarantee
Description
Cat. No.
Description
Cat. No.
Crimp Tool - 10-1/4 in.
30-425
Heavy-Duty Crimp Tool
83-005
Mechanical Indentor
Ratchet Crimp Tool
■ Use with aluminum (6 AWG to 4/0) and copper (8 AWG to 250
KCMIL) wires
■ Adjustable crimping nests with clearly marked gauges
■ Crimps insulated or bare terminals and splices on 10 to 22
AWG wire
■ Ratchet action prevents release prior to crimp connection — helps
ensure uniform crimps
■ Lightweight and easy to operate
■ Rugged cast steel construction for long-term durability
■ Vinyl-coated handles provide a solid, comfortable grip
Description
Cat. No.
Description
Cat. No.
Mechanical Indentor
88-843
Ratchet Crimp Tool
83-001
CAUTION: Never use pliers or cutters on live electrical circuits.
WARNING: The cushion grips on handles are for comfort, NOT
protection against electrical shock and should not be used on live
circuits.
WARNING: Plastic-dipped or slip-on handles NOT for protection
against electrical shock.
C-16
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Battery Powered Cable Cutter
Ratcheting Cable Cutters
■ Cuts up to 750 KCMIL hard-drawn copper
and up to 1,000 KCMIL copper and aluminum
■ Hardened steel blades
ensure consistent cuts
and long-term durability
■ Hardened steel blades ensure consistent
cuts and long-term durability
■ Blade brush keeps debris out of blade area
■ Tough plastic housing withstands rugged use
■ Quick release mechanism
simplifies blade back-out
■ Three-way switch allows for partial cuts,
adjustments and backing off cable
■ Locking mechanism keeps
handles closed for easy storage
■ 12V battery rated for 1,000 charges
■ High-leverage foot provides stability and leverage
when making multiple cuts
■ Wrist loop provides added security
when cutting overhead cable
■ Ergonomic, non-slip handles provide excellent grip and comfort
Description
Cat. No.
Battery Powered Cable Cutter Kit
(Includes cutter, battery, 120V charger, carrying case)
35-064
Battery Powered Cable Cutter
35-067
Battery only
35-065
120V Battery charger
35-068
Replacement moving blade
35-071
Carrying case
35-073
Not for use on ASCR cable
■ 750 KCMIL Ratcheting Cable Cutter is designed to cut 750 KCMIL
(MCM) and smaller hard-drawn copper and aluminum cables
Description
Cat. No.
750 KCMIL (MCM) Ratcheting Cable Cutter
35-053
Replacement blade
35-057
Not for cutting steel or ASCR
CAUTION: Comfort-grip handles are not designed for protection
against electrical shock. Do not use on live circuits.
Telco Ratcheting
Cable Cutters
Ratcheting Cable Cutter
■ Cuts hand drawn copper up to
400 KCMIL (MCM) and
soft copper, aluminum
and multiple
conductor cable
up to 600 KCMIL (MCM)
■ Hardened steel blades
ensure consistent cuts
and long-term durability
■ Hardened steel blades ensure
consistent cuts and long-term
durability
■ Quick release mechanism
simplifies blade back-out
■ Rounded blade design minimizes
cable distortion during cutting
■ Rounded blade design minimizes
cable distortion during cutting
■ Locking mechanism keeps
handles closed for easy
storage
■ Quick release mechanism simplifies
blade back-out
■ High-leverage foot provides stability and leverage when
making multiple cuts
■ Locking mechanism keeps handles closed for easy storage
■ Ergonomic, non-slip handles provide excellent grip and comfort
■ Ergonomic, non-slip handles provide excellent grip and comfort
■ Telco Ratcheting Cable Cutter jaw cuts up to 2,700 pair
telephone cable and Stalpath® type communications cable
Description
Cat. No.
400 KCMIL (MCM) Ratcheting Cable Cutter
35-056
Replacement blade
35-085
Not for cutting steel or ASCR
CAUTION: Comfort-grip handles are not designed for protection
against electrical shock. Do not use on live circuits.
Description
Cat. No.
Telco Ratcheting Cable Cutter
35-055
Replacement blade
35-054
Not for cutting steel or ASCR
CAUTION: Comfort-grip handles are not designed for protection
against electrical shock. Do not use on live circuits.
1-800-435-0705 for Customer Service
www.idealindustries.com
C-17
Cable Cutters
■ Rounded blade design minimizes
cable distortion during cutting
Heavy-Duty Slotted
Keystone Tip
Slotted Keystone Tip
■ Vapor-blasted tip prevents plate chipping
Screwdrivers
■ Identification mark on ends
■ Larger shank for heavy-duty applications
■ Precision ground tip provides secure fit in screw slot
■ Identification mark on ends
■ Nickel-chrome plating for corrosion resistance
■ Vapor-blasted tip prevents plate chipping
■ Tough, chrome vanadium steel shank
■ Precision ground tip provides secure fit in screw slot
■ Cushioned rubber grips
■ Square-shank models offer wrench-assisted turning
■ Lifetime guarantee
■ Tough, chrome vanadium steel shank
Blade Length
Total Length
Cat. No.
■ Cushioned rubber grips
1/4 in. Shank and tip
3 in.
7-3/8 in.
35-173
■ Lifetime guarantee
1/4 in. Shank and tip
6 in.
10-3/8 in.
35-176
1/4 in. Shank and tip
8 in.
12-3/8 in.
35-178
1/4 in. Shank and tip
10 in.
14-3/8 in.
35-180
Description
Square Shank
Blade Length
Total Length
Cat. No.
1/4 in. Shank and tip
4 in.
8-3/8 in.
35-154
5/16 in. Shank and tip
6 in.
11 in.
35-156
3/8 in. Shank and tip
8 in.
13 in.
35-158
Blade Length
Total Length
Cat. No.
1/4 in. Shank and tip
1 in.
3-3/8 in.
35-161
1/4 in. Shank and tip
4 in.
8-3/8 in.
35-164
5/16 in. Shank and tip
6 in.
11 in.
35-166
3/8 in. Shank and tip
8 in.
13 in.
35-168
Round Shank
Electrician’s Cabinet Tip
Heavy-Duty Electrician’s
Cabinet Tip
■ Vapor-blasted tip prevents plate chipping
■ Identification mark on ends
■ Precision ground tip provides secure fit in screw slot
■ Nickel-chrome plating for corrosion resistance
■ Tough, chrome vanadium steel shank
■ Cushioned rubber grip
■ Large diameter shank for tough applications
■ Lifetime guarantee
■ Identification marks on ends
■ Vapor-blasted tip prevents plate chipping
Description
Blade Length
Total Length
Cat. No.
3/16 in. Shank and tip
3 in.
6-3/4 in.
35-183
3/16 in. Shank and tip
4 in.
7-3/4 in.
35-184
3/16 in. Shank and tip
6 in.
9-3/4 in.
35-186
3/16 in. Shank and tip
8 in.
11-3/4 in.
35-188
3/16 in. Shank and tip
10 in.
13-3/4 in.
35-190
■ Precision ground tip provides secure fit in screw slot
■ Nickel-chrome plating for corrosion resistance
■ Tough, chrome vanadium steel shanks
■ Cushioned rubber grip
■ Lifetime guarantee
Description
C-18
www.idealindustries.com
Blade Length
Total Length
Cat. No.
1/4 in. Shank and tip
4 in.
8-3/8 in.
35-150
1/4 in. Shank and tip
6 in.
10-3/8 in.
35-151
1/4 in. Shank and tip
8 in.
12-3/8 in.
35-152
1/4 in. Shank and tip
10 in.
14-3/8 in.
35-153
1-800-435-0705 for Customer Service
Tools and Totes
Phillips Head
5-Piece
Screwdriver Set
Includes:
■ 1/4 in. x 6 in. HD Cabinet
■ 1/4 in. x 4 in. Square
Shank HD Keystone
■ 5/16 in. x 6 in. Keystone
■ Phillips #2 x 4 in.
■ Identification mark on ends
■ Heavy Duty Vinyl Pouch
■ Nickel-chrome plating for corrosion resistance
■ Tough, chrome vanadium steel shank
■ Cushioned rubber grip
■ Lifetime guarantee
Description
Blade Length
Total Length
Cat. No.
#1 Tip and 1/4 in. Shank
1 in.
3-3/8 in.
35-191
#2 Tip and 3/16 in. Shank
3 in.
6-3/4 in.
35-193
#2 Tip and 1/4 in. Shank
4 in.
8-3/8 in.
35-194
#2 Tip and 1/4 in. Shank
6 in.
10-3/8 in.
35-195
#3 Tip and 5/16 in. Shank
6 in.
11 in.
35-196
Description
Cat. No.
5-Piece Screwdriver Set
35-297
8-Piece
Screwdriver
Set
Square-Recess Tip
Includes:
■ 1/4 in. x 6 in.
HD Cabinet
■ 1/4 in. x 4 in. Square
Shank HD Keystone
■ 1/4 in. x 4 in. HD Keystone
■ 5/16 in. x 6 in. Keystone
■ 3/16 in. x 3 in. Cabinet
■ Precise tip for square-recess screws
■ 3/16 in. x 6 in. Cabinet
■ Color-coded handle for easy identification
■ Phillips #1 x 3 in.
■ Nickel-chrome plating for corrosion resistance
■ Phillips #2 x 4 in.
■ Tough, chrome vanadium steel shank
■ Heavy Duty Vinyl Pouch
■ Cushioned rubber grip
■ Lifetime guarantee
Description
Color Code
For Screw Sizes
Cat. No.
#0 x 4 in.
Yellow
3, 4
35-690
#1 x 4 in.
Green
5, 6, 7
35-691
#1 x 8 in.
Green
5, 6, 7
35-692
#2 x 4 in.
Red
8, 9, 10
35-693
#2 x 8 in.
Red
8, 9, 10
35-694
#3 x 4 in.
Black
12, 14
35-695
#3 x 8 in.
Black
12, 14
35-696
1-800-435-0705 for Customer Service
Description
Cat. No.
8-Piece Screwdriver Set
35-298
www.idealindustries.com
C-19
Screwdrivers
■ 3/16 in. x 6 in. Cabinet
■ Vapor-blasted tip prevents plate chipping
Screwdrivers/Nutdrivers
7-in-1 Twist-a-Nut™
Screwdriver/Nutdriver
5-in-1 Screwdriver/Nutdriver
■ Includes universal Wire-Nut® wrench in
handle to help install twist-on wire
connectors
■ Contains: 5/16 in. nutdriver, #1
Phillips, #2 Phillips, 9/32 in. slotted
and 3/16 in. slotted
■ Accepts connectors from every major
manufacturer in addition to IDEAL
■ Cushion grip for performance and
comfort
■ Includes #1 & #2 Phillips, 1/4 in. & 3/16 in. slotted, 1/4 in. &
5/16 in. Nutdriver
■ #35-909 includes #1 & #2 Square Recess in place of #1 & #2
Phillips
■ Twist-a-Nut™ handle is interchangeable with new conduit deburrer head (#35-096) and 6-in-1 Tap (#35-922)
Description
Cat. No.
7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver
35-908
7-in-1 Twist-a-Nut™ Screwdriver/Nutdriver with square
35-909
Replacement Bits
Cat. No.
5-in-1 Screwdriver/Nutdriver
35-905
Replacement Bits
Description
Cat. No.
#1 Phillips – 3/16 in. slotted
LA-4123
#2 Phillips – 9/32 in. slotted
LA-4124
Slim Electronics
Description
Cat. No.
1/4 in. slotted – #2 Phillips
35-911
3/16 in. slotted – #1 Phillips
35-912
1/4 in. slotted – #2 Square Recess
35-913
3/16 in. slotted – #1 Square Recess
35-914
#15 & #10 Torx
35-915
®
Description
Torx® is a trademark of Camcar division of Textron, Inc.
■ Designed for maximum handling comfort
when working in tight areas
10-in-1 Screwdriver/
Nutdriver
■ Ball-ended handle with guiding point
■ Vapor-blasted tip prevents plate chipping
■ Nickel-chrome plating for corrosion resistance
■ Tough, chrome vanadium steel shank
■ Includes 1/4 in. slotted, #2
Phillips, 3/16 in. slotted, #1
Phillips, #1 & #2 square recess,
#15 and #10 Torx® and 5/16 in. &
1/4 in. Nutdriver
■ Lifetime guarantee
■ Cushion grip for comfort and performance
Description
Cat. No.
Screwdriver/Nutdriver
35-910
Replacement Bits
Description
Cat. No.
1/4 in. slotted – #2 Phillips
35-940
3/16 in. slotted – #1 Phillips
35-941
#1 & #2 Square Recess
35-942
#15 & #10 Torx®
35-943
Description
Cat. No.
3/32 in. x 2-1/2 in. Cabinet tip
36-240
3/32 in. x 3 in. Cabinet tip
36-241
1/8 in. x 4 in. Cabinet tip
36-242
1/8 in. x 6 in. Cabinet tip
36-243
5/32 in. x 4 in. Cabinet tip
36-244
5/32 in. x 6 in. Cabinet tip
36-245
#0 – 1/8 in. x 2-1/2 in. Phillips head
36-246
#1 – 3/16 in. x 3-1/4 in. Phillips head
36-247
7-Piece Set includes one each of 36-240 thru 36-246
36-248
4-Piece Set includes one each of 36-240, -241, -242 & -246
36-249
Torx® is a trademark of Camcar division of Textron, Inc.
C-20
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Connector Wrench
■ Convenient wrench socket in end of handle for
installing Wire-Nut® Wire Connectors 74B® and 76B®
■ Vapor-blasted tip prevents plate chipping
■ Ideal for threading screws in switches, fixtures and anchors
■ Precision ground tip provides secure fit in screw slot
■ Identification mark on ends
■ Nickel-chrome plating for corrosion resistance
■ One-handed crank action for quick and easy use
■ Tough, chrome vanadium steel shank
■ Vapor-blasted tip prevents plate chipping
■ Cushioned rubber grip
■ Precision ground tip provides secure fit in screw slot
■ Lifetime guarantee
■ Nickel-chrome plating for corrosion resistance
Description
Cat. No.
■ Tough, chrome vanadium steel shank
1/4 in. x 4 in. – Mechanic’s style
30-331
■ Cushioned rubber grip
3/16 in. x 6 in. – Electrician’s style
30-333
■ Lifetime guarantee
Description
Screw-Holding
Total Length
Cat. No.
3/16 in. Shank and tip
8-3/4 in.
35-200
#2 Tip and 1/4 in. shank
9-3/4 in.
35-203
Twist-a-Nut™ Conduit Deburring Tool
■ Split blade wedges into screw slot when collar is extended
■ Holds screw in place when installing in hard to reach locations
■ Tough, chrome vanadium steel shank
■ Lifetime guarantee
Description
Cat. No.
3/16 in. x 4 in.
35-404
3/16 in. x 6 in.
35-406
3/16 in. x 8 in.
35-408
■ Deburrs inside and outside edges of 1/2 in., 3/4 in. and 1 in.
thin wall conduit
■ Hooded tip tightens EMT fitting set screws without slipping
■ Head removes and is interchangeable with
IDEAL 7-in-1 Twist-a-Nut™ Screwdriver
shaft (#35-908)
Awl
■ Head can be used in drill or cordless
screwdriver
■ Universal Wire-Nut® wrench in handle end
eases installation of twist-on connectors
■ Heavy-duty construction for piercing, punching and scribing
■ Lifetime guarantee (excludes blades)
■ Identification mark on end
■ Cushioned rubber grip
Description
Cat. No.
■ Lifetime guarantee
Conduit Deburring Tool
35-083
Description
Cat. No.
Conduit Deburring Tool - head only
35-096
Awl
35-202
Replacement Blades (2/pack)
35-097
1-800-435-0705 for Customer Service
www.idealindustries.com
C-21
Hand Tools
Quick-Rotating
Nutmaster® Nutdriver
Six-in-One Twist-a-Nut™ Tapping Tool
Screwdrovers/Nutdrivers
■ Long, hollow shank handles longer bolts
■ Identification and color coding on ends
■ Nickel/chrome plated to resist rust
and corrosion
■ Forms new threads, re-forms burred threads and cleans out
obstructions
■ Cushioned rubber grips
■ Reversible, high-carbon tap with three clearly marked
thread sizes on each end
■ Models 35-292 and 35-295 fit
Twister® Wire Connectors
■ Handle is interchangeable with 7-in-1 Screwdriver (35-908)
and Conduit Deburrer (35-083)
■ Lifetime guarantee
Description
Color
Cat. No.
3/16 in. x 3-1/4 in.
Black
35-290
1/4 in. x 3-1/4 in.
Red
35-291
5/16 in. x 3-1/4 in.
Yellow
35-292
11/32 in. x 3-1/4 in.
Green
35-293
3/8 in. x 3-1/4 in.
Blue
35-294
7/16 in. x 4 in.
Brown
35-295
1/2 in. x 4 in.
Red
35-296
Description
Cat. No.
6-32, 8-32 & 10-32 on one tapping side,
10-24, 12-24 & 1/4-20 on the other
35-922
Six-in-One Tapping Tool
■ Forms new threads, re-forms burred threads and cleans out
obstructions
■ Reversible, high-carbon tap with three clearly marked thread
sizes on each end
7-Piece
Nutdriver Set
Includes:
■ 3/16 in. x 3-1/4 in.
Description
Cat. No.
6-32, 8-32 & 10-32 on one tapping side,
10-24, 12-24 & 1/4-20 on the other
35-413
■ 1/4 in. x 3-1/4 in.
Triple-Tap Tools
■ 5/16 in. x 3-1/4 in.
■ 11/32 in. x 3-1/4 in.
■ 3/8 in. x 3-1/4 in.
■ 7/16 in. x 4 in.
■ 1/2 in. x 4 in.
■ Cleans and chases burred threads
Description
Cat. No.
7-Piece Nutdriver Set
35-299
CAUTION: Never use pliers or cutters on live electrical circuits.
WARNING: The cushion grips on handles are for comfort, NOT protection against electrical shock and should not be used on live circuits.
WARNING: Plastic-dipped or slip-on handles NOT for protection
against electrical shock.
C-22
www.idealindustries.com
■ Taps three hole sizes
Color Code
Thread Sizes
Cat. No.
Blue
10/24, 8/32, & 6/32
35-411
Orange
10/32, 8/32, & 6/32
35-412
Replacement Taps
Replacement Tap
Cat. No.
Thread Sizes
10/24, 8/32, & 6/32
35-421
10/32, 8/32, & 6/32
35-422
10/24, 12/24 & 1/4-20
35-423
Twist-a-Nut™ Shaft assembly includes: Collar, 35-422 & 35-423
35-923
1-800-435-0705 for Customer Service
Tools and Totes
Automatic Blade Lock Measuring Tape
Utility Knife
■ Blade automatically stays out
when extended
■ Quick-change
retractable blade
system — no
disassembly
required
■ Push button for smooth blade
retraction
■ Comfortable, shock-resistant
rubber grip
■ Built in pull-line cutter
Description
Cat. No.
■ Slide out blade storage compartment
Auto-Lock™ Tape Measure - 25 ft.
35-242
■ Includes three blades
Magentic Measuring Tape
■ Strong magnetic tip for one
person measurement
Description
Cat. No.
Utility Knife
35-300
Replacement blade – Universal
35-301
Electrician’s Knife
■ Durable nylon coated blade
■ 2-1/4 in. spearpoint
blade and screwdriver blade
that locks in position
■ Full rubber jacket protects
case
Description
Cat. No.
Mag-Tape™ Tape Measure - 25 ft.
35-238
■ High carbon stainless steel
blade construction for extra
strength and durability
■ Notched blade for skinning wires
■ Durable Buyrate® non-slip handle
■ Brass liners
Cable Splicing Knife
■ High carbon steel blade remains sharp
and cuts easily through many
insulation types
■ Comfortable, full size, no slip handle
Description
Cat. No.
Electrician’s Knife
35-285
Hawkbill Knife
35-091
for easy use
Description
Cat. No.
Cable Splicing Knife and Leather Holder
Leather Knife Holder Only
35-091
35-092
■ 2-1/4 in. curved, high-carbon
stainless steel blade locks
in position
■ Durable Buyrate® non-slip
handle
■ Brass liners
Hex-Key Sets
■ 8650 steel construction
■ One-piece, chrome-plated
handle
Description
Cat. No.
Hawkbill Knife
35-286
Lineman’s Jack Knife
■ Internal tension spring
and belt loop
Description
Cat. No.
■ 2-1/4 in.High-carbon steel,
stainless steel sheepfoot
blade locks in position
3 in. handle w/eight 2-in. keys (.050 in., 1/16 in., 5/64 in.,
3/32 in., 7/64 in., 1/8 in., 9/64 in. & 5/32 in.)
35-145
■ Durable Buyrate® nonslip handle
4 in. handle w/nine 3-in. keys (5/64 in., 3/32 in., 7/64 in., 1/8 in.,
9/64 in., 5/32 in., 3/16 in., 7/32 in. & 1/4 in.)
35-146
5-1/4 in. handle w/five 5-in. keys (3/16 in., 7/32 in., 1/4 in.,
5/16 in. & 3/8 in.)
35-147
■ Lifetime guarantee
1-800-435-0705 for Customer Service
■ Brass liners
Description
Cat. No.
Lineman’s Jack Knife
35-287
www.idealindustries.com
C-23
Hand Tools
■ Non-slip soft comfort grip
Torpedo Level
Extension Rule
■ 9 in. aluminum frame
with magnetic and
V-grooved edges
■ Opens to 6 ft. with graduated 6 in. brass extension
■ White windows provide
easy reading of plumb
level and 45° mitre in dim lighting
■ Markings at 1/16 in. increments with stud markings every 16 in.
■ Embedded and sealed markings resist abrasion
Description
Cat. No.
■ Hardwood slat construction with brass strike plates
9 in. Torpedo Level
35-205
■ Positive-locking, spring-actuated folding joints
Hand Tools
■ Lifetime guarantee
Fiberglass-Handled Hammers
Description
Cat. No.
Extension Rule w/inside read
35-220
Extension Rule w/outside read
35-221
Rotary BX/MC Cutter
■ Handles all common BX,
MC and Flex cables
■ Drop-forged, tempered-steel polished head
■ Strong, shock-absorbent fiberglass handle
■ Long, straight claws simplify removal of electrical fixtures
■ Comfortable, perforated Neoprene grips
■ Blue sapphire blade cuts armor
without damage to internal
conductors
Description
Cat. No.
■ Splices cleanly through
casings with only a
few turns
18 oz. x 12-1/2 in. Fiberglass-handled Hammer
35-210
■ Thumbscrew holds cable securely in place
20 oz. x 12 in. Fiberglass-handled Hammer
35-212
■ Epoxy-coated to resist corrosion
■ Lifetime guarantee
■ Handle knob stores up to six replacement blades
Electric Engraving Tool
■ Low-cost, industrial-quality
marker quickly and easily
engraves metal, glass,
stone, ceramics,
plastics, hard
rubber, wood
and many other
hard materials
Description
Cat. No.
Rotary BX/MC Cutter
35-780
Replacement blades (5 per pack)
35-781
Jab Saw
■ Unique design reduces bouncing and provides smooth,
easy writing
■ Operates at 7,200 strokes per minute
■ Includes replaceable bi-metal wallboard
blade
■ Stroke adjusts to vary depth of mark
■ Includes carbide-tipped point for normal markings
■ Diamond point available for engraving extra-hard materials
(50 to 64 Rockwell, scale C)
Description
Cat. No.
Engraver w/carbide-tipped point — 120V, 60 Hz
11-111
Engraver w/carbide-tipped point & 3-conductor grounded
cord & plug — 120V, 60 Hz
11-113
Engraver w/carbide-tipped point — 220V, 50 Hz
11-115
Carbide-tipped replacement point
11-200
Diamond replacement point
C-24
www.idealindustries.com
11-201
■ Holds all reciprocating blades and hacksaw blades
■ Ergonomic grip
Description
Cat. No.
Jab Saw
35-275
Replacement blade
36-088
1-800-435-0705 for Customer Service
Tools and Totes
Insulated Tools
Pliers
Screwdrivers
■ First UL tested and listed insulated tools available
IDEAL insulated screwdrivers and nutdrivers are individually tested
and VDE certified to 1000V AC (1500V DC). Each one is designed
and tested to meet ASTM F1505-01, EN, DIN, and IEC 60 900 test
standards.
■ 1000 Volt certified (1000V AC, 1500V DC)
■ Meets ASTM F1505-01 and IEC 60 900 standards
■ Meets OSHA requirements for insulated tools (29 CFR 1910)
■ Ergonomic cushioned grips provide 40% more torque than
conventional handles, even when wearing gloves
Serrated jaws provide secure
gripping surface
Cutting jaws and edges
are induction hardened
for greater strength
and durability
Permanently bonded, double insulated handles for
added safety
■ Tempered blades finished with black oxide and super hardened
for maximum quality
■ Precision ground tips provide secure fit for less spin-out
■ Meets OSHA requirement (29 CFR 1910) for insulated tools
High carbon tool
steel for precision
durability
Non-slip guard
for added safety
High visibility ergonomic
handles for maximum comfort
and control
Textured Santoprene® handles
provide a sure grip and are resistant
to perspiration, water, oil and chemicals
Whenever possible, always de-energize lines and equipment
prior to working on or around them. 1000V insulated tools
are designed only to reduce the chance of injury where the tool may make
contact with an energized source. Work around energized circuits should only
be done when absolutely necessary and only by qualified technicians.
Property damage, personal injury or death may result if the following warnings are not heeded:
• Do not use any insulated tool if the insulation cracks, breaks or becomes
damaged in any way. Destroy all dual-layer tools if the inner yellow layer
shows through the orange outer layer.
• Do not touch the uninsulated portion of an insulated tool or any conductive
object when either might contact an energized source.
• Tools must be kept clean and dry for proper insulating properties.
• Always inspect insulated tools before use.
• Use additional protection by wearing protective clothing and approved eye
protection.
• Always use tools that are specifically designed for the task.
• These tools meet UL 22PP, ASTM F1505-01 and IEC 60900
standards for insulated tools.
• Always follow OSHA 1910 S and NFPA 70E safety requirements
when doing electrical work.
1-800-435-0705 for Customer Service
REGULATIONS
Testing:
• Every 1000V insulated tool we sell is individually tested to ensure no failure when
subjected to live current.
UL and VDE Certification:
• Listed below are some of the tests we perform in order to pass certification:
• Tools are immersed in water for 24 hours, then tested under current for 3
minutes to ensure no current leakage or sparkover occurs.
• After being stored for 168 hours at -40° C (-40° F), tools are dropped to
ensure no damage from impact.
• After being stored for 168 hours at +70° C (158° F), a tensile load is applied
to ensure the grip is firmly bonded to the tool.
• Tools are subjected to flame for 10 seconds to ensure no flammability of the
insulating material.
OSHA Regulations:
OSHA 1910.335(a)(2)(i) When working near exposed energized conductors or
circuit parts, each employee shall use insulated tools or handling equipment if the tools or handling equipment might make contact with such conductors
or parts.
OSHA 1910.335 (a)(1)(i) Employees working in areas where there are potential
electrical hazards shall be provided with, and shall use, electrical protective
equipment that is appropriate for the specific parts of the body to be protected and
for the work to be performed.
Make sure you are in compliance by providing and using IDEAL insulated
tools!
www.idealindustries.com
C-25
Insulated Tools
The IDEAL insulated tool line creates a perfect blend of safety, comfort and precision functionality. Each tool features
double insulated Santoprene® handles with a soft, easy-to-grip outer surface. In addition to the ergonomic qualities found
in our tools, the insulated coating process acts as an ‘at-a-glance’ safety check. If the orange outer coating reveals any of
the inner yellow surface, an electrician will know that this tool needs to be replaced.
25-Piece Journeyman Kit
9-Piece Basic Kit
Insulated Hand Tools & Kits
9-Piece Basic Insulated Kit – 35-9300
Includes:
Cat. No.
Reflex™ Super T -Stripper
45-9615
9-1/2 in. Side Cutting Linesman Pliers
30-9430
8 in. Diagonal Cutting Pliers w/angled head
35-9029
8-1/2 in. Long-Nose Pliers
35-9038
9-1/2 in. High-Leverage Cable Cutter
35-9052
3/16 in. x 5 in. Screwdriver
35-9321
1/4 in. x 6 in. Screwdriver
35-9323
#2 Phillips Tip Screwdriver
35-9311
®
25-Piece Journeyman Insulated Kit – 35-9302
Includes:
Cat. No.
Reflex™ Super T®-Stripper
45-9615
Wire Stripper Cutter
45-9120
9-1/2 in. Side Cutting Linesman Pliers
30-9430
8 in. Diagonal Cutting Pliers w/angled head
35-9029
8-1/2 in. Long-Nose Pliers
35-9038
10 in. Tongue and Groove Pliers
35-9430
Fuse Puller
34-002
Heavy-Duty Soft Tool Case
35-9350
9-1/2 in. High-Leverage Cable Cutter
35-9052
9-3/4 in. Multi-Crimp Tool
30-9429
1/8 in. x 3 in. Screwdriver
35-9320
3/16 in. x 5 in. Screwdriver
35-9321
1/4 in. x 6 in. Screwdriver
35-9323
5/16 in. x 6 in. Screwdriver
35-9324
3/8 in. x 8 in. Screwdriver
35-9325
#1 Phillips Tip Screwdriver
35-9310
#2 Phillips Tip Screwdriver
35-9311
#3 Phillips Tip Screwdriver
35-9312
3/16 in. Hex Nutdriver
35-9330
1/4 in. Hex Nutdriver
35-9331
5/16 in. Hex Nutdriver
35-9332
3/8 in. Hex Nutdriver
35-9333
Description
Cat. No.
7/16 in. Hex Nutdriver
35-9334
#1 x 3 in. Phillips Screwdriver
35-9310
1/2 in. Hex Nutdriver
35-9335
#2 x 4 in. Phillips Screwdriver
35-9311
Knife
35-9340
#3 x 6 in. Phillips Screwdriver
35-9312
VoltSensor™
61-063
1/8 in. x 4 in. Slotted Screwdriver
35-9320
Fuse Puller
34-002
3/16 in. x 5 in. Slotted Screwdriver
35-9321
Heavy-Duty Soft Tool Case
35-9352
7/32 in. x 7 in. Slotted Screwdriver
35-9322
1/4 in. x 6 in. Slotted Screwdriver
35-9323
5/16 in. x 7 in. Slotted Screwdriver
35-9324
3/8 in. x 8 in. Slotted Screwdriver
35-9325
Screwdriver Kit
Cat. No.
9-Piece Insulated Screwdriver Kit
(Includes all 9 screwdrivers listed above.)
35-9303
C-26
www.idealindustries.com
Insulated Screwdrivers
1-800-435-0705 for Customer Service
Tools and Totes
Insulated Pliers
17-Piece Standard Insulated Kit – 35-9301
Includes:
Cat. No.
Reflex™ Super T®-Stripper
45-9615
9-1/4 in. Side Cutting Linesman Pliers
30-9430
8 in. Diagonal Cutting Pliers w/angled head
35-9029
8-1/2 in. Long-Nose Pliers
35-9038
10 in. Tongue and Groove Pliers
35-9430
9-1/2 in. High-Leverage Cable Cutter
35-9052
1/8 in. x 3 in. Screwdriver
35-9320
3/16 in. x 5 in. Screwdriver
35-9321
1/4 in. x 6 in. Screwdriver
35-9323
5/16 in. x 6 in. Screwdriver
35-9324
3/8 in. x 8 in. Screwdriver
35-9325
#1 Phillips Tip Screwdriver
35-9310
#2 Phillips Tip Screwdriver
35-9311
#3 Phillips Tip Screwdriver
35-9312
VoltSensor™
61-063
Fuse Puller
34-002
Heavy-Duty Soft Tool Case
35-9351
Insulated Nutdrivers
Cat. No.
9-1/4 in. Side Cutting Linesman Pliers
30-9430
8 in. Diagonal Cutting Pliers w/angled head
35-9029
8-1/2 in. Long-Nose Pliers
35-9038
9-1/2 in. High-Leverage Cable Cutter
35-9052
9-3/4 in. Multi-Crimp Tool
35-9429
10 in. Tongue and Groove Pliers
35-9430
Premium T -Stripper
35-9120
Reflex™ Super T®-Stripper
35-9615
®
Insulated Knife
Description
Cat. No.
Insulated Electrician’s Knife
30-9340
Cases
Description
Cat. No.
3/16 in. Hex Nutdriver
35-9330
1/4 in. Hex Nutdriver
35-9331
5/16 in. Hex Nutdriver
35-9332
3/8 in. Hex Nutdriver
35-9333
7/16 in. Hex Nutdriver
35-9334
1/2 in. Hex Nutdriver
35-9335
9/16 in. Hex Nutdriver
35-9336
Nutdriver Kit
Cat. No.
7-Piece Insulated Nutdriver Kit
(Includes all 7 Nutdrivers listed above.)
35-9304
1-800-435-0705 for Customer Service
Description
Description
Cat. No.
Tool Roll Case for Basic Kit (35-9300)
35-9350
Tool Roll Case for Standard Kit (35-9301)
35-9351
Tool Roll Case for Journeyman Kit (35-9302)
35-9352
Hard Case for Screwdriver Kit (35-9303)
35-9353
Hard Case for Nutdriver Kit (35-9304)
35-9353
22PP
Our pliers are the first to have Insulated Tools
successfully passed UL certification!
Recognized as the undisputed leader in product safety and certification, UL has
developed rigorous safety standards for 1000V insulated tools. In order to carry the
UL listing mark, tools must be tested by UL to meet these standards.
Only tools that carry the UL Listed mark have passed this stringent certification
process. Why accept anything else?
www.idealindustries.com
C-27
Insulated Hand Tools & Kits
17-Piece Standard Kit
Safety Tools
5-in-1 Non-Conductive
Screwdriver/Nutdriver
Safe-T-Grip® Fuse Pullers
■ 1000V AC, 1500V DC rated per ASTM F 1505-94 and
EN 60900 (IEC900)
■ Maximum efficiency and convenience for removing or replacing cartridge-type fuses
■ Contains: 1/4 in. slotted, 3/16 in. slotted, #1 Phillips, #2 Phillips
and 1/4 in. nutdriver
■ Three sizes handle fuses ranging from 0 to 600A
■ Accommodates most standard 1/4 in. hex bits
■ Fully insulated, high-dielectric, glass-filled
polypropylene construction
■ Powerful magnet securely holds bits in place
■ Notched handles provide safe, no-slip grip
■ Handle will store up to 8 standard bits
■ Clearly marked amperage ranges
■ Exceed MIL specifications
Description
Cat. No.
5-in-1 Non-Conductive Screwdriver/Nutdriver
35-9905
1/4 in. Slotted Replacement Bit
LA-4125
3/16 in. Slotted Replacement Bit
LA-4126
#1 Phillips Replacement Bit
LA-4127
#2 Phillips Replacement Bit
LA-4128
Fuse Pullers
Description
Cat. No.
Small Puller for 250V, 9/32 in. to 1/2 in. dia. fuses; 5 in. long
34-001
Medium Puller for 0 to 100A/250V & 600V, 1/2 in. to 1 in. dia.
fuses; 7-1/2 in. long
34-002
Large Puller for 31 to 600A/250V & 31 to 400A/600V, 3/4 in. to
2-1/2 in. dia. fuses; 11-3/4 in. long
34-003
Fuse Puller and Test Light
■ Molded of tough,
high-impact nylon
for greater strength
■ No-slip gripping
surface and
protective
finger stops
for added
safety
Description
Cat. No.
■ Convenient pocket-sized tool safety
pulls cartridge fuses and checks
electrical connections
Small Puller for 0 to 30A/250V, 1/4 in. to 1/2 in. dia. fuses;
5 in. long
34-015
■ Test prods fit parallel and tandem slot
receptacles
Large Puller for 0 to 100A/250V & O to 60A/600V, 9/16 in. to
1 in. dia. fuses; 7-1/4 in. long
34-016
■ Built-in resistors limit current flow to eliminate false indication
■ For 9/16 in. to 1 in. fuses
■ For use on fuses to 100A/250V and 60A/600V
■ Test capacity from 100V to 600V AC/DC
C-28
www.idealindustries.com
Description
Cat. No.
Fuse Puller & Test Light only
34-012
30 in. Lead w/test prod
34-013
30 in. Lead w/insulated clip
34-014
1-800-435-0705 for Customer Service
Advanced Bi-Metal Hole Saws
Introducing the new line of hole saws from IDEAL. With
re-engineered bi-metal construction, IDEAL hole saws
now have a cutting longevity that rivals any in the industry.
The new cutting tooth geometry works faster and longer
on tough applications like stainless steel. Increased chip
removal enhances wood cutting performance by increasing
speed and reducing wear on the teeth. An extensive set
of sizes and kits are available to meet all your cutting
needs. When it comes to performance, IDEAL is your
source for hole saws.
Bi-metal construction
for stay-sharp, shockresistant teeth
Increased chip
clearance for
faster cutting
and longer life
Variable-pitched teeth
reduce cutting vibration
for smoother cuts and
minimal operator fatigue
1-1/2 in. cutting depth
allows cuts through
2" x 4"s on the first cut
Unique cutting edge
geometry for high
wear resistance and
long life
Hole Saws
■ 1-1/2 in. cutting depth cuts through 2 x 4’s on the first cut
■ Cut wood, plastic and machinable metal including:
nail-embedded wood, plywood, pipe and stainless steel
■ High speed steel teeth
■ Fit standard arbors and feature knock-out slots
for easy core removal
■ 4 to 6 teeth per inch variable pitch, positive rake,
M3 bi-metal tooth design
1-800-435-0705 for Customer Service
Pipe Tap
Saw Diameter
Size*
(Inches)
(Inches)
Use Arbor No. 35-391 or 35-392 or 35-393
9/16
—
5/8
—
11/16
—
3/4
—
13/16
—
7/8
3/4
15/16
—
1
—
1-1/16
—
1-1/8
1
1-3/16
—
Use Arbor No. 35-394
1-1/4
—
1-5/16
—
1-3/8
—
1-7/16
—
1-1/2
1-1/4
1-9/16
—
1-5/8
—
1-11/16
—
1-3/4
1-1/2
1-13/16
—
1-7/8
—
2
—
2-1/16
—
2-1/8
—
2-1/4
2
2-5/16
—
2-3/8
—
2-1/2
—
2-9/16
—
2-5/8
2-1/2
2-3/4
—
2-7/8
—
3
—
3-1/8
—
3-1/4
3
3-3/8
—
3-1/2
—
3-5/8
—
3-3/4
3-1/2
3-7/8
—
4
—
4-1/8
—
4-1/4
—
4-3/8
—
4-1/2
—
4-3/4
4-1/2
5
—
5-1/2
—
5-3/4
—
6
—
Pipe Entrance
Size**
(Inches)
Cat. No.
—
—
—
3/8
—
1/2
—
—
—
3/4
—
35-340
35-341
35-342
35-343
35-344
35-345
35-346
35-347
35-348
35-349
35-350
—
—
1
—
—
—
—
—
1-1/4
—
—
1-1/2
—
—
—
—
—
2
—
—
—
—
2-1/2
—
—
—
—
3
—
—
—
3-1/2
—
—
4
—
—
—
—
—
35-351
35-352
35-353
35-354
35-355
35-356
35-357
35-358
35-359
35-360
35-361
35-362
35-363
35-364
35-365
35-366
35-367
35-368
35-369
35-370
35-371
35-372
35-373
35-374
35-375
35-376
35-377
35-378
35-379
35-380
35-381
35-382
35-383
35-384
35-385
35-386
35-387
35-388
35-389
35-390
All pipe sizes listed in the Pipe Tap Size and Pipe Entrance Size columns are standard industry sizes. All
pipes are sized by the nominal inside diameter.
*The sizes listed provide the necessary information whenever a pipe is to be threaded into tanks, boilers, etc. To
ensure the best results, the hole should be reamed before tapping with a reamer having a taper of 3/4 in. per foot.
**The sizes listed provide the necessary information for any given pipe size to have sufficient clearance to
pass through beams, walls, bulkheads, etc.
www.idealindustries.com
C-29
Hole Saws
Tools and Totes
Hole Saw Kits
Hole Saw Arbors
Master Electrician’s
Hole Saw Kit
35-391
35-392
35-393
35-394
■ Electrical sizes for pipe and
conduit through 4 in.
35-395
■ 1/4 in. high-speed drill pilots with 118° split-point for fast,
accurate hole starting
■ 13-piece kit
Hole Saws
■ Metal case
■ Durable steel construction
Shank Size
Thread
Size
Chuck Size
Cat. No.
1/4 in. Round
1/2-20
1/4
35-391
Description
Cat. No.
Hole Saw sizes 7/8 in., 1-1/8 in., 1-3/8 in., 1-3/4 in., 2 in.,
2-1/2 in., 3 in., 3-5/8 in., 4-1/8 in., 4-1/2 in.
Also includes arbor models 35-391, 35-393 & 35-394
35-401
3/8 in. Hex
1/2-20
3/8
35-392
7/16 in. Hex
1/2-20
1/2
35-393
7/16 in. Hex
5/8-18
1/2
35-394
7/16 in. Hex
1/2-20
1/2
35-395*
Kit 35-401 Includes:
*Can be used for all hole saw sizes
Electrician’s Hole Saw Kit
■ Electrical sizes for pipe and conduit
through 2 in.
35-397
■ 8-piece kit
35-398
■ Durable plastic case
Replacement Pilot Drills for Hole Saw Arbors
Description
Cat. No.
4-1/2 in. x 1/4 in. – Fits 35-391, 35-393, 35-394 & 35-395 arbors
35-397
Description
Cat. No.
2-3/4 in. x 1/4 in. – Fits 35-392 arbor
35-398
Hole Saw sizes 7/8 in., 1-1/8 in., 1-3/8 in., 1-3/4 in., 2 in.
& 2-1/2 in. Also includes arbor models 35-393 & 35-394
35-400
Kit 35-400 Includes:
Hole Saw Arbor Extension
■ For use with 7/16 in. arbors
Maintenance
Hole Saw Kit
■ 12 in. length
■ Designed for electricians and
industrial and general-purpose
maintenance needs.
■ Plumbing and electrical sizes for pipe
and conduit through 2 in.
■ 13-piece kit
Shank Size
Cat. No.
12” Hole Saw Arbor Extension for 7/16 in. Arbors
35-396
C-30
www.idealindustries.com
■ Durable plastic case
Kit 35-399 Includes:
Description
Cat. No.
Hole Saw sizes 3/4 in., 7/8 in., 1-1/8 in., 1-3/8 in., 1-1/2 in.,
1-3/4 in., 2 in., 2-1/4 in. & 2-1/2 in.
Also includes arbor models 35-391, 35-393 & 35-394
and extension for 7/16 in. arbor shank
35-399
1-800-435-0705 for Customer Service
Tools and Totes
Tungsten Carbide Grit Hole Saws
Adjustable Can Light Hole Saw
■ Superior resistance to heat, wear and
abrasion
■ Adjustable from
2-1/2 in. to 7 in.
(63mm - 177mm)
■ Unique snag resistant tooth/gullet design
results in superior cutting performance
N EW
■ Self-sharpening carbide coated cutting
blade
■ 1-1/2 in. cutting depth
Description
Cat. No.
■ Includes 2 dust
shields to minimize
clean up
Drill not included.
Use Arbor No. 35-391, 35-392 or 35-393
3/4 in. Carbide Grit Hole Saw
35-343CG
Description
Cat. No.
7/8 in. Carbide Grit Hole Saw
35-345CG
Adjustable Can Light Holesaw
35-398
1-1/8 in. Carbide Grit Hole Saw
35-349CG
Recessed Lighting Hole Saws
Use Arbor No. 35-394
1-3/8 in. Carbide Grit Hole Saw
35-353CG
1-1/2 in. Carbide Grit Hole Saw
35-355CG
1-3/4 in. Carbide Grit Hole Saw
35-359CG
2 in. Carbide Grit Hole Saw
35-362CG
2-1/8 in. Carbide Grit Hole Saw
35-364CG
2-1/4 in. Carbide Grit Hole Saw
35-365CG
2-1/2 in. Carbide Grit Hole Saw
35-368CG
■ Cut abrasive materials
such as ceiling tile, lath
and plaster
2-5/8 in. Carbide Grit Hole Saw
35-370CG
■ Use with arbor 35-394
3 in. Carbide Grit Hole Saw
35-373CG
3-1/4 in. Carbide Grit Hole Saw
35-375CG
Description
3-5/8 in. Carbide Grit Hole Saw
35-378CG
4-3/8 in. Carbide Grit Hole Saw
35-384CG
6-3/8 in. Carbide Grit Hole Saw
35-601CG
6-5/8 in. Carbide Grit Hole Saw
35-602CG
6-7/8 in. Carbide Grit Hole Saw
35-603CG
Step Bits
N EW
■ Durable tungsten carbide
grit cutting edge
■ Quick and easy installation
of recessed lighting
Cat. No.
Electrician’s Step
Bit Kit
35-511
35-512 35-513
35-514
35-515
35-516
35-517
■ Self-starting point eliminates starter holes or punches, even on
curved surfaces (except 35-514)
■ Unique double-fluted design for balanced cuts and cooler
operation
■ Exceptional titanium coating stands up to wood, plastic and
metal – extends bit life compared to standard step bits
Bit Diameters
Sizes (Inches)
Step
Step
No. of
Increments Thickness Shank Dia.
Hole Sizes (Inches)
(Inches)
(Inches) Cat. No.
■ Durable blow-molded case
securely holds and protects
bits
■ Kit includes four step bits
(35-511, 35-513, 35-515
and 35-517)
■ Kit provides a solution for
every electrical hole size
between 1/8 in. and 1-3/8 in.
N EW
1/8 to 1/2
13
1/32
1/8
1/4
35-511
1/4 to 3/4
9
1/16
1/8
3/8
35-512
Description
Cat. No.
1/4 to 7/8
11
1/16
1/16
3/8
35-513
Electrician’s Step Bit Kit
35-520
1/2 to 1
8
1/16
1/8
3/8
35-514
1/4 to 1-1/8
16
1/16
1/16
3/8
35-515
3/16 to 1/2
6
1/16
3/8
1/4
35-516
1/4 to 1-3/8
10
1/32
1/16 to 1/4
3/8
35-517
1-800-435-0705 for Customer Service
www.idealindustries.com
C-31
Hole Saws / Step Bits
■ Cuts drywall and
ceiling tile
■ The choice for abrasive or thin material
including cast iron, drywall, plaster,
stucco, ceramics, fiberglass,
hardwood and composites
Nailbiter™ Ship Auger Bits
Installer Bits
■ Hole in fluted head for pulling wires through walls,
ceiling and floors
■ Flutes designed for quick chip removal — no clogging or binding
■ Premium quality, extra-hard 52-100 carbon bearing steel
■ Bites through nails, wood and other materials with an average
30% longer life on treated wood
Description
Length (Inches)
Cat. No.
■ Full-length, heat-treat and temper provide excellent cutting-area
hardness and longer shank durability
Installer Bit – 1/4 in.
18
35-870
Installer Bit – 3/8 in.
18
35-871
■ Precision designed and cut screw point to resist point breakage
Installer Bit – 1/2 in.
18
35-872
Drills
■ Sharpenable
Wood Boring Bits
Power Ship Augers
Bit Length 17 in. – 12 in. Twist
Description
Shank
Diameter
(Inches)
Cat. No.
Power Ship Auger – 1/2 in.
5/16
35-820
Power Ship Auger – 5/8 in.
7/16
35-821
Power Ship Auger – 11/16 in.
7/16
35-822
Power Ship Auger – 3/4 in.
7/16
35-823
Power Ship Auger – 13/16 in.
7/16
35-824
■ Spur point centering
Power Ship Auger – 7/8 in.
7/16
35-825
■ Resharpenable
Power Ship Auger – 15/16 in.
7/16
35-826
Power Ship Auger – 1 in.
7/16
35-827
Description
RPM in
Soft Wood
RPM in
Hard Wood
Cat. No.
7/16
35-828
7/8 in. Wood Boring Bit
650-1000
600-850
90-193
1-1/8 in. Wood Boring Bit
650-1000
600-850
90-196
Power Ship Auger – 1-1/8 in.
Power Ship Auger – 1-1/4 in.
7/16
35-829
Shank
Diameter
(Inches)
Cat. No.
5/16
35-810
Short Ship Auger – 11/16 in.
5/16
35-811
Short Ship Auger – 3/4 in.
5/16
35-812
Short Ship Auger – 13/16 in.
5/16
35-813
Short Ship Auger – 7/8 in.
5/16
35-814
Short Ship Auger – 1 in.
5/16
35-815
Short Ship Auger – 1-1/8 in.
7/16
Short Ship Augers
Bit Length 7-1/2 in. – 5 in. Twist
Description
Short Ship Auger – 5/8 in.
Short Ship Auger – 1-1/4 in.
7/16
■ Drills curved holes even in
tight corners, eliminating sharp
inside angles that hang wires
■ Precision sharpened tip for fast
and smooth boring
■ Hex shank eliminates slippage
Auger Bit Extensions
35-816
Auger Bit Extensions, 18 in.
Six flats to fit drill chuck – Allen wrench included
Description
Cat. No.
35-817
Auger Bit Extension – 5/16 in.
35-818
Auger Bit Extension – 7/16 in.
35-819
Mini™ Augers
N EW
■ Designed to fit between wall studs when used with common drills
■ Eliminates the need for expensive right angle drills
Description
Shank Diameter
Cat. No.
5/8 x 4-3/4 in.
5/16 in.
35-862
3/4 - 4-3/4 in.
5/16 in.
35-864
7/8 x 4-3/4 in.
5/16 in.
35-866
1 x 4-3/4 in.
5/16 in.
35-868
C-32
www.idealindustries.com
Fits between wall studs!
1-800-435-0705 for Customer Service
Tools and Totes
Masonry bits for tough applications
Rotary Hammer Bit
■ Vacuum heat-treated carbide tipped masonry bit for rotary
or hammer drilling
■ Tip is made of the hardest carbide to retain a sharp cutting
edge for drilling masonry materials
Rotary Drills
Use electric rotary drills, hand drills or bit braces for rotary-only drilling
applications in softer materials that require no hammering action. Rotary
drills should be used when drilling brittle materials, which could shatter
under the impact of hammer tools.
SDS Rotary Percussion Bit
Hammer Drills
Use the Rotary Hammer Bit with electric hammer drills for drilling harder
brick, limestone, marble materials or concrete with aggregates such as
bluestone, granite, and quartz pebble. A hammer drill enhances the fast
rotating action of the Rotary Hammer Bit with slight impact that helps
to break up material being drilled.
■ Double fast-spiral fluting for superior dust removal, faster
drill time and virtually no bind in the hole
■ Heat-treating process ensures extra long life even when
used on tough, extra hard and abrasive materials
■ Shank for use with SDS and SDS plus rotary hammers
SDS Rotary Hammers
The Rotary Percussion Bit is designed for use with SDS rotary hammers. These hammers drill with successive strong impacts
while rotating rapidly, bringing the tip into contact with new material
as it cuts, and carrying it out along engineered spirals. The hardest
of concretes and aggregates can be penetrated if an SDS rotary hammer of proper capacity is used with the appropriate Rotary Percussion
Bit.
Description
Cat. No.
3/16 in. x 6-5/8 in. SDS Masonry Bit
90-030
1/4 in. x 6-5/8 in. SDS Masonry Bit
90-031
5/16 in. x 6-5/8 in. SDS Masonry Bit
90-032
3/8 in. x 6-5/8 in. SDS Masonry Bit
90-033
1/2 in. x 6-3/4 in. SDS Masonry Bit
90-034
1-800-435-0705 for Customer Service
Description
3/16 in. x 4 in. Masonry Bit
3/16 in. x 6 in. Masonry Bit
1/4 in. x 4 in. Masonry Bit
1/4 in. x 6 in. Masonry Bit
5/16 in. x 4 in. Masonry Bit
5/16 in. x 6 in. Masonry Bit
3/8 in. x 4 in. Masonry Bit
3/8 in. x 6 in. Masonry Bit
1/2 in. x 6 in. Masonry Bit
Application
Bluestone
Brick (common)
Brick (hard)
Cement Block
Cinder Block
Concrete (soft)
Concrete (hard)
Concrete (very hard)
Fieldstone
Flagstone
Granite
Limestone
Marble (soft & medium)
Marble (hard)
Plaster
Rock
Sandstone (soft)
Sandstone (hard)
Slate
Terra Cotta Block
Terrazzo
Tile, Glazed Vitreous
Tile, Non-vitrified
Tile, Structural
Rotary
Hammers
Rotary
Percussion Bit
X
X
X
X
X
X
X
X
X
Shank
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
1/4”
3/8”
Cat. No.
90-003
90-001
90-004
90-002
90-005
90-006
90-008
90-009
90-011
Rotary
Drills
Rotary
Hammer Bit
Hammer
Drills
Rotary
Hammer Bit
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
www.idealindustries.com
C-33
Drills
IDEAL masonry drill bits are manufactured in the USA using
state of the art technology. All are heat-treated and brazed
in one of the most modern vacuum furnaces available,
insuring consistent through-hardening of the steel. Our
process demands the use of a premium high temperature,
free flowing copper paste for brazing the tip, eliminating
voids and producing the strongest bond available.
Flexible Drill Bits
Premium heat-treated spring steel
Extra durable
braze where
shank meets tip
Flexible Drills
Fish holes in tip and shank
for easy wire pulling
Professional drill bits drill and fish wire in one easy step.
Drill and pull wire through blind areas in ceilings, walls and
floors. Shanks are made from premium heat-treated spring
steel for maximum flexibility while practically eliminating
any retained shank bend. A three-flat non-slip grip on the
shank and fish holes in both the tip and shank insure
trouble-free wire pulling in either direction. Our tip design
provides superior tip/shank contact, increasing the strength
and durability of the braze and preventing separation
when striking nails or other obstructions. Multiple styles
are available for a variety of applications.
Screw Point
Flexible Bit, Type B
■ Ultra-sharp ground threads provide
increased pulling power through obstructions
Best for
WOOD
■ Designed for easy to tough wood drilling
C-34
Wire Installation
■ Multi-purpose versatile bit for
clean holes
Shank
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
3/16
1/4
1/4
1/4
Cat. No.
90-080
90-081
90-082
90-083
90-084
90-085
90-086
90-087
90-088
90-089
90-090
90-091
90-092
Best for
light WOOD
& light METAL
■ Designed for easy to medium
wood drilling and light metal
■ Pressure is needed for starting and
pulling the bit through the wood
Description
■ Fast and aggressive, self-starting bit
Description
3/8 in. x 24 in. Screw Point Flexible Bit
3/8 in. x 36 in. Screw Point Flexible Bit
3/8 in. x 54 in. Screw Point Flexible Bit
3/8 in. x 72 in. Screw Point Flexible Bit
1/2 in. x 36 in. Screw Point Flexible Bit
1/2 in. x 54 in. Screw Point Flexible Bit
1/2 in. x 72 in. Screw Point Flexible Bit
9/16 in. x 36 in. Screw Point Flexible Bit
9/16 in. x 54 in. Screw Point Flexible Bit
9/16 in. x 72 in. Screw Point Flexible Bit
3/4 in. x 36 in. Screw Point Flexible Bit
3/4 in. x 54 in. Screw Point Flexible Bit
3/4 in. x 72 in. Screw Point Flexible Bit
Serrated Combination
Flexible Bit, Type C
Shank
Cat. No.
1/4 in. x 24 in. Serrated Combination Flexible Bit
3/16
90-061
1/4 in. x 54 in. Serrated Combination Flexible Bit
3/16
90-063
3/8 in. x 24 in. Serrated Combination Flexible Bit
3/16
90-065
3/8 in. x 36 in. Serrated Combination Flexible Bit
3/16
90-066
3/8 in. x 54 in. Serrated Combination Flexible Bit
3/16
90-067
3/8 in. x 72 in. Serrated Combination Flexible Bit
3/16
90-068
1/2 in. x 54 in. Serrated Combination Flexible Bit
3/16
90-070
9/16 in. x 54 in. Serrated Combination Flexible Bit
3/16
90-073
Flexible Bit Extension
■ Heavy duty split point
high-speed steel drill bit
Best for
METAL
■ The best when encountering nailembedded wood, steel studs and steel plates
■ Three lengths available for 3/16 in.
and 1/4 in. shaft diameters
■ Connect to chuck end of shaft to
increase the length of the bit
Description
Shank
Cat. No.
3/16 in. x 36 in. Flexible Bit Extension
3/16
90-170
3/16 in. x 54 in. Flexible Bit Extension
3/16
90-171
90-155
1/4 in. x 36 in. Flexible Bit Extension
1/4
90-173
3/16
90-156
1/4 in. x 54 in. Flexible Bit Extension
1/4
90-174
3/8 in. x 72 in. High-speed Steel Flexible Bit
3/16
90-157
1/2 in. x 24 in. High-speed Steel Flexible Bit
1/4
90-158
1/2 in. x 36 in. High-speed Steel Flexible Bit
1/4
90-159
1/2 in. x 54 in. High-speed Steel Flexible Bit
1/4
90-160
1/2 in. x 72 in. High-speed Steel Flexible Bit
1/4
90-161
Description
Shank
Cat. No.
3/8 in. x 24 in. High-speed Steel Flexible Bit
3/16
90-154
3/8 in. x 36 in. High-speed Steel Flexible Bit
3/16
3/8 in. x 54 in. High-speed Steel Flexible Bit
Flexible Bit
Placement Tool
■ Use as a positioning guide
for the flexible drill bits
Masonry Flexible Bit,
Type M
■ Aids in more accurate placement of bit tips within walls
■ Increases directional control during drilling
Best for
MASONRY
■ Masonry drill bit
Description
Cat. No.
Flexible Bit Placement Tool
90-176
■ Designed for drilling in lightweight masonry materials
Description
Shank
Cat. No.
3/8 in. x 54 in. Masonry Flexible Bit
3/16
90-124
1/2 in. x 72 in. Masonry Flexible Bit
1/4
90-128
1-800-435-0705 for Customer Service
www.idealindustries.com
C-35
Flexible Drills
High-Speed Steel
Flexible Bit, Type HS
Reciprocating Blades
■ Bi-metal blades last up to 10 times longer than carbon steel
blades
■ Shatterproof for tough applications
■ Fit all reciprocating saws using 1/2 inch universal shank
■ Flexible spring-back provides long blade life
■ Super-hard, high speed steel teeth for a sharp, long-lasting
cutting edge
Reciprocating Blades
L/W/TH
(Inches)
TPI
Material
Blade
Bock
Qty.
4 x 3/4 x .035
18
Bi-metal
Straight
5
Sheet metal and pipes with wall
thickness from 1/8 to 3/16 in.
36-055
6 x 3/4 x .035
18
Bi-metal
Straight
5
Sheet metal and pipes with wall
thickness from 1/8 to 3/16 in.
36-057
6 x 3/4 x .035
18
Bi-metal
Straight
25
Sheet metal and pipes with wall
thickness from 1/8 in. to 3/16 in.
36-057B
6 x 3/4 x .035
24
Bi-metal
Straight
5
Sheet metal and pipes with
wall thickness up to 1/8 in.
36-058
6 x 3/4 x .035
24
Bi-metal
Straight
25
Sheet metal and pipes with
wall thickness up to 1/8 in.
36-058B
6 x 3/4 x .035
14
Bi-metal
Straight
5
Heavy-gauge metals 1/8 in. and
thicker; barstock angles
36-059
6 x 3/4 x .035
14
Bi-metal
Straight
25
Heavy-gauge metals 1/8 in. and
thicker; barstock angles.
36-059B
6 x 3/4 x .035
18
Bi-metal
Straight
5
Sheet metal and pipes with wall
thickness from 1/8 in. to 3/16 in.
36-060
6 x 3/4 x .050
18
Bi-metal
Straight
2
Heavy-duty blade for cutting pipe, structural
and stainless steel from 1/8 to 3/16 in. thick.
36-085
8 x 3/4 x .050 10/14 Bi-metal
Straight
2
Heavy-duty blade for cutting pipe, structural
and stainless steel from 1/8 to 1/2 in. thick.
36-086
12 x 3/4 x .050 10/14 Bi-metal
Taper
5
Heavy-duty blade for cutting pipe, structural
and stainless steel from 1/8 to 1/2 in. thick.
36-087
6 x 3/4 x .050
6
Bi-metal
Taper
5
Roughing, fast work, nail-embedded
knotty wood. Remodeling.
36-065
6 x 3/4 x .050
6
Bi-metal
Taper
25
Roughing, fast work, nail-embedded
knotty wood. Remodeling.
36-065B
9 x 3/4 x .050
6
Bi-metal
Taper
5
Roughing, fast work, nail-embedded
knotty wood. Remodeling.
36-066
12 x 3/4 x .050
6
Bi-metal
Taper
5
Roughing, fast work, nail-embedded
knotty wood. Remodeling.
36-067
6 x 3/4 x .035
10
Bi-metal
Straight
5
Wood w/nails, metal and non-ferrous metal
and pipes with wall thickness over 3/8 in.
36-075
8 x 3/4 x .050
Grit
Tung. Grit
Straight
2
Iron pipe, fiberglass, reinforced plastics,
ceramic tile, stone, slate and brick.
36-090
3 x 5/16 x .035 18
Bi-Metal
Scroll
5
Scroll cutting wood, cast aluminum
and non-ferrous metals
36-090
9 x 7/8 x .062
6
Bi-metal
Taper
2
Wood and nail demolition. Plunge
cutting ability. Remodeling.
36-095
9 x 7/8 x .062
10
Bi-metal
Taper
2
Metal and pipe demolition.
Fire and rescue work.
36-096
6 x 3/4 x .050
6
Bi-metal
Taper
2
Plaster and drywall.
36-088
Application
Cat. No.
Metal Cutting
Heavy-Duty Metal Cutting
Wood w/Nails
General Purpose
Specialty Cutting
Demolition
Plaster/Drywall
C-36
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Long-Life Metal Cutting Reciprocating Blades
N EW
■ Painstakingly engineered to be the longest lasting metal cutting blades available
■ Long-life blades perform up to three times as many cuts as similar metal cutting blades
■ 8% cobalt cutting edge for extreme durability
■ Shatterproof bi-metal design
L/W/TH
(Inches)
Long-Life Blades
TPI
Material
Blade
Bock
Qty.
Application
Cat. No.
6 x 3/4 x .035
18
Bi-metal
Straight
5
Long-Life blade for cutting sheet metal and
pipes with wall thickness from 1/8 to 3/16 in.
36-043
8 x 3/4 x .035
18
Bi-metal
Straight
5
Long-Life blade for cutting sheet metal and
pipes with wall thickness from 1/8 to 3/16 in.
36-044
6 x 1 x .042
14
Bi-metal
Straight
5
Long-Life blade for cutting heavy gauge
36-046
metals 1/8 in. and thicker; barstock and angles
12 x 1 x .050
14
Bi-metal
Straight
5
Long-Life blade for cutting heavy gauge
36-048
metals 1/8 in. and thicker; barstock and angles
Portable Band Saw Blades
■ Bi-metal construction
■ Fit all standard portable band saw machines
■ For pipe, tubing and solids
■ Cut any machinable metal, including conduit, angle iron, structurals,
rebar and stainless steel tubing
L/W/THK (Inches)
TPI
Qty./Pack
Cat. No.
44-7/8 x 1/2 x .020
10
3
36-070
44-7/8 x 1/2 x .020
14
3
36-071
44-7/8 x 1/2 x .020
18
3
36-072
44-7/8 x 1/2 x .020
24
3
36-073
C-37
Recip/Band Saw Blades
■ Longer life for greater value
Rotary BX/MC Cutter
Heavy-Duty Hacksaw
■ Handles all common BX,
MC and Flex cables
■ Blue sapphire blade cuts armor
without damage to internal
conductors
■ Splices cleanly through
casings with only a
few turns
■ Use as conventional hacksaw
or as jab saw to enlarge holes
Hand Tools
■ Thumbscrew holds cable securely in place
■ Rugged frame provides lightweight
rigidity and exceptional control
■ Epoxy-coated to resist corrosion
■ Handle knob stores up to six replacement blades
■ Stores up to nine extra blades
Description
Cat. No.
Rotary BX/MC Cutter
35-780
■ Blades can be adjusted to 55° angle for
flush cutting and tensioned to 25,000 psi
Replacement blades (5 per pack)
35-781
■ Includes 12 in. x 24T bi-metal blade
Jab Saw
Description
Cat. No.
Heavy Duty Hacksaw
35-260
Ergonomic Hacksaw
■ Includes replaceable bi-metal wallboard
blade
■ Holds all reciprocating blades and hacksaw blades
■ Ergonomic grip
■ Angled handle for easier cutting
■ Blade can easily be adjusted for flush cutting
■ Easy tensioning wing-nut keeps blades tight for straighter cuts
Description
Cat. No.
Jab Saw
35-275
Replacement blade
36-088
■ Cushioned ergonomic grip for performance and comfort
■ Includes 12 in. x 24T bi-metal blade
Description
Cat. No.
Ergonomic Hacksaw
35-261
Aviation Tin Snips
Hacksaw Blades
■ Chrome-molybdenum steel
forged blades for greater
strength and durability
■ Bi-metal blades
provide strength,
flexibility and longer life
■ Serrated edges provide
a stable hold when cutting
■ Labor-saving design for
easier cutting
Description
■ Comfortable non-slip
dual durometer grips
Qty./Pack
Cat. No.
12 in. x 18T Blades
10
35-271
12 in. x 24T Blades
10
35-272
Description
Cat. No.
12 in. x 32T Blades
10
35-273
Straight Cut Aviation Tin Snips
35-001
12 in. x 18T Blades
100
35-262
Right Cut Aviation Tin Snips
35-002
12 in. x 24T Blades
100
35-263
Left Cut Aviation Tin Snips
35-003
12 in. x 32T Blades
100
35-264
C-38
www.idealindustries.com
1-800-435-0705 for Customer Service
Designed with the electrician’s needs in mind
Tool Carriers
Premium Leather Line
Top of the line tool carriers are handcrafted from heavy, top-grain
cowhide and slow tanned in natural oils to enhance the leather’s
inherent strength. Each bag is hand waxed for lasting protection
against stains and moisture and is warranted for life. Natural or
black leather – your choice.
Standard Leather Line
Leather that stands up to the job like no other material,
these tool carriers are constructed of top-grain, natural
cowhide and tanned for added strength and durability.
Watch their color age to a deep tan over the years.
Fabric Line
Durable, lightweight, portable tool totes in rugged nylon polyester
or heavyweight canvas provide the perfect tool storage. Convenient
pockets mean easy access; inner compartments keep your tools
organized and safe when not in use.
Tool Kits
Tool kits designed to meet the needs of the professional
electrician, from apprentice to master electrician. Kit
selections have been established with the guidance
from leading electrical trainers and seasoned master electricians. Whether you’re just starting out or are a seasoned
professional, IDEAL Tool Kits provide the
perfect carrier and tools to do the job.
1-800-435-0705 for Customer Service
www.idealindustries.com
C-39
Tuff-Tote™ Tool Carriers
Tuff-Tote™ Ultimate Tool Carriers
Tool Carriers
■ Eight-inch square tool carrier features two divided inside compartments with six screwdriver loops each, one large center compartment, four outside pockets and eight outside tool loops
■ Exclusive leather-wrapped grab handle for carrying comfort
■ Removable shoulder strap helps relieve lower back strain
■ Convenient 6 in. x 8 in. tool carrier with four center screwdriver slots, two interior compartments, two divided outside pockets and four outside tool loops
■ Unique stand-alone design keeps tools standing upright for
easy identification and access
■ Exclusive leather grab handle for carrying comfort
■ Rust-resistant, plated-steel hardware and heavy, lock-stitched
nylon thread for long-term durability
■ Unique stand-alone design keeps tools standing upright for
easy identification and access
■ Oil and moisture-resistant reinforced bottom
■ Rust-resistant, plated-steel hardware and heavy, lock-stitched
nylon thread for long-term durability
Description
Premium Leather Carrier w/shoulder strap
Premium Black Leather Carrier w/shoulder strap
Standard Leather Carrier w/shoulder strap
Cat. No.
35-975
35-975BLK
35-325
■ Removable shoulder strap helps relieve lower back strain
■ Oil and moisture-resistant reinforced bottom
Description
Cat. No.
Premium Leather Carrier w/shoulder strap
Premium Black Leather Carrier w/shoulder strap
Standard Leather Carrier w/shoulder strap
35-969
35-969BLK
35-324
Tuff-Tote™ Tool Pouches
Electrician’s Tool Pouch
■ Seven-pocket tool pouch
■ Full length belt tunnel
■ Chain tape lanyard
Description
Electrician’s Tool Pouch
Cat. No.
10-466
■ Eight-pocket, belt-mounted pouch features large utility compartment with two dividers and six screwdriver loops, seven
outside pockets, release snaps and tape chain
■ Exclusive leather grab handle for carrying comfort
■ Removable shoulder strap helps relieve lower back strain
■ Rust-resistant, plated-steel hardware and heavy, lock-stitched
nylon thread for long-term durability
■ Tunnel belt loop accommodates belts up to 2-1/4 in. wide
Description
Premium Leather Pouch w/shoulder strap
Premium Black Leather Pouch w/shoulder strap
Standard Leather Pouch w/shoulder strap
Cat. No.
35-950
35-950BLK
35-311
Note: Tools sold separately
C-40
www.idealindustries.com
1-800-435-0705 for Customer Service
Tools and Totes
Tuff-Tote™ Shoulder Bag
Shoulder Straps
■ Compact tool organizer with closing flap for added security
and protection
■ Features three inside compartments with six screwdriver loops,
small closed outside pocket for small tools or connectors and
flat back pocket for papers or slim tools
■ Exclusive leather-wrapped grab handle for carrying comfort
■ 2-in. wide shoulder pad for added comfort
Description
Cat. No.
Premium Leather Strap
35-965
Premium Black Leather Strap
35-965BLK
Standard Leather Strap
35-338
■ Detachable shoulder strap helps relieve lower back strain
■ Rust-resistant, plated-steel hardware and heavy, lock-stitched
nylon thread for long-term durability
Description
Premium Leather Shoulder Bag w/shoulder strap
Premium Black Leather Shoulder Bag w/shoulder strap
Belts
Cat. No.
35-980
35-980BLK
35-316
35-995
Tuff-Tote™
Cell Phone Pouches
35-903
■ Fits most phones
35-995BLK
■ Closing flap for added security
and protection
■ Convenient belt strap
10-398
Description
Premium Leather Pouch w/belt strap
Premium Black Leather Pouch w/belt strap
Cat. No.
35-958
35-958BLK
■ Nickel-plated hardware for long-term durability and corrosion
resistance
Description
Cat. No.
Premium Leather Belt – 2 in. x 48 in.
35-995
Premium Black Leather Belt – 2 in. x 48 in.
Tuff-Tote™
Tester Pouches
■ Fits most hand-held testers
35-995BLK
Premium Leather Belt w/Clasp Buckle – 2 in. x 48 in.
35-903
Standard Leather Belt – 1-3/4 in. x 46 in.
35-316
Web Belt
10-398
■ Easy-access top
Hammer Holder
■ Convenient belt strap
■ Heavy-duty leather construction
Description
Cat. No.
Premium Leather Pouch w/belt strap
35-956
Premium Black Leather Pouch w/belt strap
Standard Leather Pouch w/belt strap
1-800-435-0705 for Customer Service
35-956BLK
35-339
■ Riveted steel hammer loop
■ Fits on all sizes of tool belts
Description
Hammer Holder
Cat. No.
10-399
www.idealindustries.com
C-41
Tool Carriers
■ Nickel-plated hardware for long-term durability
and corrosion resistance
Pocket Pal™ Tool Holsters
Bucket Bag Tool Carriers
■ Protects pocket from sharp tools
■ 11-1/2 in. deep bag
fits over the rim of a
standard 5-gallon
bucket
■ Doubles tool carrying capacity
■ Can be worn in pocket or on belt
Description
Cat. No.
Pocket Pal™ Tool Holster
Tool Carriers
Pocket Pal™ Tool Holster - CAMO
35-505
35-505CAM
■ Forty-three
convenient pockets —
36 pleated outside
and inside pockets
■ Rugged nylon
polyester construction
Belt Bag™ Supplies Pouches
Description
■ Holds wire connectors, staples,
and other supplies ready for
use on the job
Belt Bag™ Supplies Pouch - CAMO
35-665CAM
Tool Porter™ Tool Bags
Cat. No.
Belt Bag™ Supplies Pouch
35-665
Bucket Bag Tool Carrier – CAMO
■ Easy access opening closes
automatically to keep supplies
safely retained until needed
Description
Cat. No.
Bucket Bag Tool Carrier – Blue
35-405
35-405CAM
■ Soft-sided, large-capacity bag
(10 in. deep x 17 in. long x 6-1/4 in.
wide) provides ample storage
■ Rugged zipper closure helps
prevent tool loss
■ Nineteen outside pockets offer easy
access to commonly used tools and supplies
Mechanic’s Tool Bag
■ Reinforced bottom increases durability
and carrying ease
■ Eight narrow inside pockets
designed to hold small tools
■ Detachable shoulder strap rated at 40 lbs.
■ Two side pockets with closeable
snaps for large tools or loose items
■ Double inside liner and rigid
bottom prevent bag distortion
■ Durable nylon polyester construction
Description
Cat. No.
Tool Porter™ Tool Bag – 18 oz. canvas
35-415
Tool Porter™ Tool Bag – nylon polyester
35-417
Note: Tools sold separately
Description
Cat. No.
Mechanic’s Tool Bag
35-535
Supplies Apron
■ Two pockets for connectors
and fasteners, each 8 in. x 15 in.
Divider Pouch™ Small Parts Bag
■ Natural duck construction
■ Designed to provide perfect
small parts storage — keeps
parts separate and organized
Description
Cat. No.
Supplies Apron
35-474
■ Six internally divided 5-in.
deep pockets
r
you o to
d
d
og
A
ny l L
a
p
com I DEA tes!
-To
Tuff
■ Convenient drawstring protects
contents from spillage
■ Convenient handle loop
■ Sized to stack in 5-gallon buckets
■ Durable nylon polyester construction
Description
Cat. No.
Divider Pouch™ – blue
35-655
C-42
www.idealindustries.com
Call 800-435-0705
for information on
custom imprinted orders.
1-800-435-0705 for Customer Service
Tools and Totes
Tool Carrier™/Electrician’s Carrier™
Tool Bags
Canvas Tool Bag
■ Extra large 16 in. x 16 in. tool bag
■ Reinforced steel framework
■ Genuine leather handles and
straps
■ Stitched outer pockets provide convenient storage and quick
access for frequently used tools
■ Heavy-duty, 18 oz. canvas construction
Description
Cat. No.
Canvas Tool Bag
35-302
Journeyman Electrician’s Tote™
■ Compact and versatile design
■ Velcro® closure protects contents from loss
Description
Cat. No.
Tool Carrier™ Tool Bag – 7-1/2 in. D x 17 in. L x 6-1/4 in. W
35-533
Electrician’s Carrier™ Tool Bag – 10 in. D x 17 in. L x 6-1/4 in. W
35-534
■ Carry as a hand-tote, shoulder-tote,
or tool-belt
■ Includes removable shoulder
strap and belt
■ Durable multi-ply
construction
Note: Tools sold separately
Large Mouth Bags
■ Top opens completely for easy
access to large tools — reinforced
to hold itself open
■ Measures 9 in. wide x 12 in. deep
with outside and inside pockets
for convenient hand tool storage
Description
Cat. No.
Journeyman Electrician’s Tote™
35-462
Master Electrician’s Tote™
■ Spacious and durable design
■ Rugged zipper closure helps
prevent tool loss
■ Removable shoulder strap
■ Organizes and displays tools for
fast access
■ Durable multi-ply construction
■ Includes removable shoulder strap
■ Durable multi-ply construction
Description
Cat. No.
Master Electrician’s Tote™ – Blue
35-441
Zipper Pouches
Description
Cat. No.
■ Durable, water resistant material
Large Mouth Bag – 13 in. long – Blue
35-410
■ Heavy duty, self-repairing zippers
Large Mouth Bag – 16 in. long – Blue
35-418
Large Mouth Bag – 16 in. long – CAMO
Large Mouth Bag – 18 in. long – Blue
Large Mouth Bag – 18 in. long – CAMO
Large Mouth Bag – 20 in. long – Blue
Large Mouth Bag – 20 in. long – CAMO
Large Mouth Bag – 24 in. long – Blue
Large Mouth Bag – 24 in. long – CAMO
35-418CAM
35-427
35-427CAM
Description
Cat. No.
35-431CAM
Zipper Pouch 10-1/2 in. long – Blue
35-402
35-463
Zipper Pouch 12-1/2 in. long – Blue
35-403
35-431
35-463CAM
Zipper Pouch 12-1/2 in. long – CAMO
35-403CAM
Note: Tools sold separately
1-800-435-0705 for Customer Service
www.idealindustries.com
C-43
Tool Carriers
■ Heavy-weight canvas sides with
interior pocket
Wire Management
D
Pro-Met™
Stainless Steel
Cut angle 60°
Pitch 45°
Cable Ties
Dare to compare
Central Rib Replaces Teeth
■ Central rib design allows for maximum
flexibility without loosing resistance
■ Central relief eliminates breaking points
■ Infinitely adjustable to any bundle diameter
Pro-Met™
Superior Strength
Nylon
■ Excellent impact resistance
Unique Tail Design
■ Straight tail gives you more tightening
diameter
Pro-Met™
Nylon
■ Spear point simplifies installation
■ Ribbing on the point allows for grabbing
and tightening
■ Larger stainless steel barb for
more resistance
■ Metal tooth is cut and set firmly in
place using exclusive
manufacturing processes
Ergonomic Head
■ Head design allows for quicker installation
■ Smooth head protects installer hands
■ Decrease your application costs
Miniature (18 lb.) Natural and UV Black
Description
Length
Width
Thickness
Max Bundle
Tensile Strength
Qty./Bag
Cat. No.
Natural Nylon
100
IMET1M-C
Natural Nylon
1000
IMET1M-M
UV Black Nylon
100
IMET1M-CO
IMET1M-M0
3.9 in./100mm
0.10 in./2.5mm
0.035 in./0.9mm
0.9 in./24mm
18 lbs./18 DaN
UV Black Nylon
1000
Natural Nylon
100
IMET2M-C
Natural Nylon
1000
IMET2M-M
7.9 in./200mm
0.10 in./2.5mm
0.035 in./0.9mm
2.2 in./55mm
18 lbs./18 DaN
UV Black Nylon
100
IMET2M-CO
UV Black Nylon
1000
IMET2M-MO
D-2
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Intermediate (40 lb.) Ties Natural and UV Black
Length
Width
Thickness
Max Bundle
Tensile Strength
Qty./Bag
Cat. No.
Natural Nylon
100
IMET1_5I-C
Natural Nylon
1000
IMET1_5I-M
UV Black Nylon
100
IMET1_5I-CO
UV Black Nylon
1000
IMET1_5I-MO
Natural Nylon
100
IMET2I-C
Natural Nylon
1000
IMET2I-M
5.5 in./140mm
7.9 in./200mm
0.14 in./3.5mm
0.14 in./3.5mm
0.039 in./1.0mm
0.039 in./1.0mm
1.4 in./36mm
2.2 in./55mm
40 lbs./28 DaN
40 lbs./28 DaN
UV Black Nylon
100
IMET2I-CO
UV Black Nylon
1000
IMET2I-MO
Natural Nylon
100
IMET3I-C
Natural Nylon
1000
IMET3I-M
UV Black Nylon
100
IMET3I-CO
UV Black Nylon
1000
IMET3I-MO
11 in./280mm
0.14 in./3.5mm
0.039 in./1.0mm
3.1 in./80mm
40 lbs./28 DaN
Standard (50 lb.) Ties Natural and UV Black
Description
Length
Width
Thickness
Max Bundle
Tensile Strength
Natural Nylon
Natural Nylon
7.9 in./200mm
0.18 in./4.5mm
0.043 in./1.1mm
2.0 in./51mm
50 lbs./40 DaN
Qty./Bag
Cat. No.
100
IMET2S-C
1000
IMET2S-M
UV Black Nylon
100
IMET2S-CO
UV Black Nylon
1000
IMET2S-MO
Natural Nylon
100
IMET3S-C
Natural Nylon
1000
IMET3S-M
UV Black Nylon
100
IMET3S-CO
IMET3S-MO
11.4 in./290mm 0.18 in./4.5mm
0.043 in./1.1mm
3.0 in./76mm
50 lbs./40 DaN
UV Black Nylon
1000
Natural Nylon
100
IMET4S-C
Natural Nylon
1000
IMET4S-M
14.2 in./360mm 0.18 in./4.5mm
0.043 in./1.1mm
4.0 in./101mm
50 lbs./40 DaN
UV Black Nylon
100
IMET4S-CO
UV Black Nylon
1000
IMET4S-MO
Qty./Bag
Cat. No.
Heavy-Duty (120 lb.) Ties Natural and UV Black
Description
Length
Width
Thickness
Max Bundle
Tensile Strength
Natural Nylon
50
IMET2LH-L
Natural Nylon
500
IMET2LH-D
UV Black Nylon
50
IMET2LH-LO
UV Black Nylon
500
IMET2LH-DO
Natural Nylon
50
IMET4LH-L
Natural Nylon
8.7 in./220mm
0.30 in./7.5mm
0.059 in./1.5mm
2.2 in./56mm
120 lbs./80 DaN
500
IMET4LH-D
UV Black Nylon
50
IMET4LH-LO
UV Black Nylon
500
IMET4LH-DO
14.2 in./360mm 0.30 in./7.5mm
1-800-435-0705 for Customer Service
0.059 in./1.5mm
4.0 in./101mm
120 lbs./80 DaN
www.idealindustries.com
D-3
Cable Ties
Description
Quality Construction
Tab Stop
■ One-piece design for added strength
■ Stay-Tab feature allows tie to be partialy
closed without engaging the pawl (locking
mechanism)
■ Superior locking mechanism
■ Exceeds industry tensile strength ratings
■ Allows adjustment of bundle before
tightening
Cable Ties
Low Insertion Force
Stepped Tail Gripper
■ Tapered thin tip reduces initial friction
■ Tapered tail grip assures positive threading
■ Lowest insertion force with the highest
tensile strength
■ Stepped tail allows for easier grabbing
and tightening once engaged
■ Reduces installation fatigue
No Burrs or Sharp Edges
Angled Tail
■ Smooth corners provide added safety
■ Eases initial insertion alignment
■ Rounded edges eliminate insulation
damage
■ Lowers installation costs
Miniature (18 lb.) Natural & UV Black
Description
Length
Width
Thickness
Max Bundle Tensile Strength Mil-Spec Reference
Natural Nylon
Natural Nylon
MS3367-4-9
4.0 in./102mm
.094 in./2.39mm
.042 in./1.06mm
1/16 - 7/8
18 lbs.
UV Black Nylon
MS3367-4-0
UV Black Nylon
Qty./Bag
Cat. No.
100
IT1M-C
1000
IT1M-M
100
IT1M-CO
1000
IT1M-MO
Natural Nylon
100
IT2M-C
Natural Nylon
1000
IT2M-M
UV Black Nylon
100
IT2M-CO
UV Black Nylon
1000
IT2M-MO
8.1 in./206mm
.094 in./2.39mm
.042 in./1.06mm
1/16 - 2-3/16
18 lbs.
Intermediate (40 lb.) Natural & UV Black
Description
Length
Width
Thickness
Max Bundle Tensile Strength Mil-Spec Reference
Natural Nylon
Natural Nylon
MS3367-5-9
5.7 in./145mm
.140 in./3.56mm
.049 in./1.24mm
1/16 - 1-7/16
40 lbs.
UV Black Nylon
MS3367-5-0
UV Black Nylon
Natural Nylon
UV Black Nylon
11.5 in./292mm
*1_5 Series
D-4
.142 in./3.60mm
.055 in./1.40mm
1/16-3-3/8
40 lbs.
Qty./Bag
Cat. No.
100
IT1_5I-C
1000
IT1_5I-M
100
IT1_5I-CO
1000
IT1_5I-MO
100
IT3I-C
100
IT3I-CO
*
www.idealindustries.com
*
1-800-435-0705 for Customer Service
Wire Management
Description
Length
Width
Thickness
Max Bundle Tensile Strength Mil-Spec Reference
Natural Nylon
MS3367-1-9
Natural Nylon
Qty./Bag
Cat. No.
100
IT2S-C
1000
IT2S-M
100
IT2S-CO
1000
IT2S-MO
Heat Stabilized Black Nylon
100
IT2S-C3O
Natural Nylon
100
IT3S-C
500
IT3S-D
UV Black Nylon
7.5 in./190mm
.178 in./4.52mm
.053 in./1.34mm
1/16 - 1-7/8
50 lbs.
UV Black Nylon
MS3367-7-9
Natural Nylon
UV Black Nylon
MS3367-1-0
11.2 in./284mm
.178 in./4.52mm
.053 in./1.34mm
1/16 - 3-1/16
50 lbs.
100
IT3S-CO
500
IT3S-DO
Heat Stabilized Black Nylon
100
IT3S-C3O
Natural Nylon
100
IT4S-C
500
IT4S-D
UV Black Nylon
MS3367-2-9
Natural Nylon
UV Black Nylon
MS3367-7-0
14.5 in./368mm
.178 in./4.52mm
.053 in./1.34mm
1/16 - 4-1/8
50 lbs.
UV Black Nylon
MS3367-2-0
Heat Stabilized Black Nylon
Natural Nylon
UV Black Nylon
17.0 in./432mm
.190 in./4.82mm
.053 in./1.34mm
1/16 - 4-3/4
50 lbs.
100
IT4S-CO
500
IT4S-DO
100
IT4S-C3O
100
IT5S-C
100
IT5S-CO
*2S, 3S & 4S Series
*
*
Light Heavy-Duty, Heavy-Duty & Extra Heavy-Duty Natural, UV Black & Heat Stabilized Black
Description
Natural Nylon
Length
15.1 in./384mm
Width
.300 in./7.62mm
Thickness
.075 in./1.90mm
Max Bundle Tensile Strength Mil-Spec Reference
3/16-4-1/16
120 lbs.
UV Black Nylon
Natural Nylon
17.8 in./451mm
.300 in./7.62mm
.075in./1.90mm
3/16-5-1/4
Qty./Bag
Cat. No.
MS3367-3-9
50
IT4LH-L
MS3367-3-0
50
IT4LH-LO
120 lbs.
UV Black Nylon
Natural Nylon
24.2 in./614mm
.300 in./7.62mm
.075in./1.90mm
3/16-7
120 lbs.
UV Black Nylon
Natural Nylon
50
IT5LH-L
50
IT5LH-LO
50
IT7LH-L
50
IT7LH-LO
50
IT8LH-L
50
IT8LH-LO
MS3367-10-9
50
IT7H-L
UV Black Nylon
MS3367-10-0
50
IT7H-LO
Natural Nylon
MS3367-12-9
50
IT10H-L
MS3367-12-0
50
IT10H-LO
MS3367-13-9
50
IT11H-L
MS3367-13-0
50
IT11H-LO
MS3367-16-9
50
IT14H-L
MS3367-16-8
50
IT14H-L8
MS3367-16-0
50
IT14H-LO
28.0 in./711mm
.300 in./7.62mm
.075in./1.90mm
3/16-8
120 lbs.
UV Black Nylon
Natural Nylon
25.3 in./642mm
33.1 in./841mm
.340 in./8.64mm
.340 in./8.64mm
.090 in./2.29mm
.090 in./2.29mm
3/16-7-3/16
3/16-9-3/4
175 lbs.
175 lbs.
UV Black Nylon
Natural Nylon
37.1 in./942mm
.340 in./8.64mm
.090 in./2.29mm
3/16-11
175 lbs.
UV Black Nylon
Natural Nylon
Gray Nylon
47.8 in./1214mm
.340 in./8.64mm
.090 in./2.29mm
3/8-14-1/2
175 lbs.
UV Black Nylon
Natural Nylon
22.8 in./579mm
UV Black Nylon
.50 in./12.7mm
.080 in./2.03mm
3/16-6
250 lbs.
100
IT6EH-C
100
IT6EH-CO
*4LH, 7H, 10H, 11H, 14H Series
1-800-435-0705 for Customer Service
*
www.idealindustries.com
*
D-5
Cable Ties
Standard (50 lb.) Natural, UV Black & Heat Stabilized Black
Mounting Head Ties Natural and UV Black
■ Use for attaching bundles to surfaces
■ Allows bundling before and after
mounting
Description
Cable Ties
Natural Nylon
UV Black Nylon
Length
Width
Strap Thickness
6.0 in./152mm
.140 in./3.55mm
.048 in./1.21mm
Max Bundle Tensile Strength
1/16 - 1-1/4 in.
Screw Size
30 lbs.
No. 8
Qty./Bag
Cat. No.
100
IT1_5IMH-C
100
IT1_5IMH-CO
Natural Nylon
100
IT2SMH-C
Natural Nylon
1000
IT2SMH-M
100
IT2SMH-CO
UV Black Nylon
1000
IT2SMH-MO
Natural Nylon
100
IT3SMH-C
100
IT3SMH-CO
UV Black Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
8.1 in./206mm
.178 in./4.52mm
.053 in./1.35mm
1/16 - 1-3/4 in.
50 lbs.
No. 10
11.8 in./300mm
.189 in./4.80mm
.050 in./1.27mm
1/16 - 3 in.
50 lbs.
No. 10
14.5 in./370mm
.189 in./4.80mm
.060 in./1.52mm
1/16 - 4 in.
50 lbs.
No. 10
15.7 in./398mm
.300 in./7.62mm
.075 in./1.90mm
3/16 - 4-1/16 in.
120 lbs.
1/4”
100
IT4SMH-C
100
IT4SMH-CO
100
IT4LHMH-C
100
IT4LHMH-CO
*2S, 4LH Series
*
*
In-Line Ties Natural and UV Black
■ In-line design provides a low profile to reduce required
clearance
■ Eliminates sharp edges to protect adjacent cables along with
arms and hands
Description
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
Length
7.5 in./191mm
15.1 in./384mm
Width
Thickness
.178 in./4.52mm
.300 in./7.62mm
.053 in./1.35mm
.075 in./1.90mm
Max Bundle Tensile Strength Mil-Spec Reference
3/8 - 1-3/4 in.
9/16 - 3-1/2 in.
MS3367-23-9
50 lbs.
120 lbs.
Qty./Bag
Cat. No.
100
IT2SIL-C
IT2SIL-CO
MS3367-23-0
100
MS3367-25-9
100
IT4LHIL-C
MS3367-25-0
100
IT4LHIL-CO
*2S Series
*
*
Push Mount Ties Natural and UV Black
■ For mounting in pre-drilled panel holes
■ Use with panels 1/4 in./3.6mm thick
Description
Natural Nylon
UV Black Nylon
D-6
Length
Width
Thickness
8.0 in./203mm
.190 in./7.83mm
.055 in./1.40mm
www.idealindustries.com
Max Bundle Tensile Strength
1-7/8 in.
50 lbs.
Qty./Bag
Cat. No.
100
IT2SPM-C
100
IT2SPM-CO
1-800-435-0705 for Customer Service
Wire Management
Plenum Rated-Halar® Ties
■ For use in air handling spaces
■ Easily recognized maroon color
■ Low smoke density and excellent flammability rating
Description
Length
Width
Thickness
Qty./Bag
Cat. No.
Maroon Halar
4.0 in./102mm
.094 in./2.4mm
.042 in./1.07mm
1/16 - 7/8 in.
Max Bundle Tensile Strength
18 lbs.
100
IT1M-C702
Maroon Halar
8.0 in./203mm
.178 in./4.5mm
.053 in./1.35mm
1/16 - 2 in.
50 lb.s
100
IT2S-C702
Qty./Bag
Cat. No.
Cable Ties
Approximate dimensions.
Halar® is a trademark of Ausimont Chemical Co.
Releasable Ties Natural and UV Black
■ Use where changes are expected
■ Easy release and reuse
Description
Natural Nylon
UV Black Nylon
Natural Nylon
UV Black Nylon
Natural Nylon
Length
Width
Thickness
5.9 in./149.8mm
.298 in./7.57mm
.050 in./1.27mm
1/8 - 1-1/4 in.
50 lbs.
7.9 in./200mm
.298 in./7.57mm
.053 in./1.35mm
1/8 - 2 in.
50 lbs.
11.9 in./301.6mm .314 in./7.97mm
UV Black Nylon
Max Bundle Tensile Strength
.054 in./1.37mm
1/8 - 3 in.
50 lbs.
100
IT1_5SRL-C
100
IT1_5SRL-CO
100
IT2SRL-C
100
IT2SRL-CO
100
IT3SRL-C
100
IT3SRL-CO
Identification Ties
■ Write-on surface
■ Bundle and identify at the
same time
Description
Length
Width
Thickness
Pad Size
Qty./Bag
Cat. No.
Natural Nylon
4.0 in./102mm
.100 in./2.54mm
.044 in./1.12mm
1/16 - 7/8 in.
Max Bundle Tensile Strength
18 lbs.
5/16 in. x 1 in.
100
IT1MID-C
Natural Nylon
7.8 in./200mm
.181 in./4.59mm
.055 in./1.40mm
1/16 - 1-7/8 in.
50 lbs.
1/2 in. x 1/8 in.
100
IT2SID-C
Powr-Tie™ Wrap-It Cable Ties
■ Excellent in reusable applications
■ Won’t pinch fiber
■ Low density Polyethelene hook with nylon knit loops
Description
Black Hook-n-Loop Tie
Length
Black Hook-n-Loop Tie
8 in.
Black Hook-n-Loop Tie
11 in.
1-800-435-0705 for Customer Service
Width
Qty./Bag
6 in.
Cat. No.
15-020
1/2 in.
20
15-040
15-030
www.idealindustries.com
D-7
Mounting Pads
■ Patented stay-in-place tab keeps cable ties from
sliding down during vertical applications
“Stay-N-Place”
Tab
■ Lead-n-feature allows easy insertion for hard to
reach applications
Smooth Radius
Cradle
Lead-N-Feature
■ Four-sided entry slots save time during
placement orientation
■ Smooth radius cradle eliminates possible
damage to cable while providing stable support
Webbed Punch
Through Screw Hole
Cable Ties
■ Webbed punch through screw hole allows
maximum adhesive surface area, along with
easy insertion of mechanical fasteners
4-Sided Entry
Rubber or Acrylic
Base Adhesives
Low Profile
■ Low Profile is essential in confined spaces
■ UL recognized, rubber adhesive positioning
device
Description
Length
Width
Slot Height
Slot Width
Screw Size
Natural Nylon
.74 in./19mm
UV Black Nylon
.19 in./4.8mm
.05 in./1.2mm
.20 in./5.1mm
No. 4
Natural Nylon
.99 in./25mm
UV Black Nylon
.20 in./5.0mm
.06 in./1.5mm
.20 in./5.1mm
No. 6
Qty./Bag
Cat. No.
100
IT750MP-C
100
IT750MP-CO
100
IT1000MP-C
100
IT1000MP-CO
Screw Mounting Bases - Standard and Low Profile
Standard Screw Mount
Description
Low Profile Mount
Length
Width
Height
Slot Height
Slot Width
Screw Size
.590 in./15mm
.370 in./9.40mm
.270 in./6.86mm
.062 in./1.59mm
.190 in./4.83mm
No. 6
.870 in./22mm
.640 in./16.26mm
.380 in./9.65mm
.125 in./3.18mm
.300 in./7.62mm
1/4”
.750 in./19mm
.500 in./12.70mm
.120 in./3.04mm
.062 in./1.57mm
.180 in./4.57mm
No. 8
Screw Mount Natural Nylon
Screw Mount UV Black Nylon
Screw Mount Natural Nylon
Screw Mount UV Black Nylon
Low Profile Mount
Qty./Bag
Cat. No.
100
IT1SMB-C
100
IT1SMB-CO
100
IT2SMB-C
100
IT2SMB-CO
100
IT1LPMB-C
Adjustable Quick Clip
■ Locks securely and can be easily reopened for routing changes
■ Adjustable to various diameters
■ Natural color
■ Thick adhesive back for quick installation
Bundle Range
Base Length
Base Width
Qty./Bag
Cat. No.
7/32 in. x 17/64 in. (.215 - .258)
7/8 in.
43/63 in.
100
15-100
5/16 in. x 13/32 in. (.312 - .406)
1 in.
3/4 in.
50
15-101
15/32 in. x 9/16 in. (.469 - .562)
1-1/4 in.
3/4 in.
20
15-102
37/64 in. x 3/4 in. (.578 - .75)
1-1/2 in.
3/4 in.
20
15-103
D-8
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Write-On I.D. Marker Plates
Cable-Tie Installation Tools
■ Textured, matte surface accepts any type of ink, pencil or heat
stamping
41-990
■ Natural color allows for readable and convenient identification
■ Use with miniature and intermediate cable ties
■ Consistent, positive tension
■ Flush cut-off leaves no projections to damage nearby wires or
components
Description
Qty./Bag
Cat. No.
100
15-693
Natural – 1-1/4 in. x 1/2 in.
■ Lightweight economy model for smaller jobs
■ Standard and heavy-duty models feature rugged, die-cast
aluminum construction with comfortable, cushioned grips
■ Scrap tail stays in tool until trigger is released
Description
Cat. No.
Economy – use w/intermediate & standard ties*
15-991
Standard – use w/intermediate & standard ties
41-990
Heavy-duty – use w/standard & heavy-duty ties
41-995
*Color may vary
Clamps
■ Use with #10 mounting screw
Description
Closed Diameter
Center to Center
Width
Natural Nylon
.125 in./3.18mm
.343 in./8.71mm
3/8 in.
Natural Nylon
.250 in./6.35mm
.421 in./10.69mm
3/8 in.
Thickness
Mounting Hole
Qty./Bag
Cat. No.
100
IT125CCL-C
.050 in./1.27mm .203 in./5.16mm
.050 in./1.27mm .203 in./5.16mm
UV Black Nylon
Natural Nylon
.375 in./9.52mm
.500 in./12.70mm
1/2 in.
.060 in./1.52mm .203 in./5.16mm
UV Black Nylon
Natural Nylon
.500 in./12.70mm
.553 in./14.05mm
1/2 in.
.060 in./1.52mm .203 in./5.16mm
UV Black Nylon
Natural Nylon
.625 in./15.88mm
100
IT250CCL-C
100
IT250CCL-CO
100
IT375CCL2-C
100
IT375CCL2-CO
100
IT500CCL2-C
100
IT500CCL2-CO
IT625CCL2-C
.625 in./15.88mm
1/2 in.
.060 in./1.52mm .203 in./5.16mm
100
Natural Nylon
.750 in./19.05mm
.699 in./17.75mm
1/2 in.
.060 in./1.52mm .203 in./5.16mm
100
IT750CCL2-C
Natural Nylon
1.000 in./25.40mm
.825 in./20.96mm
1/2 in.
.060 in./1.52mm .203 in./5.16mm
100
IT1000CCL2-C
IDEAL Cable Tie Catalog Numbering System
IT
I = IDEAL INDUSTRIES, INC.
2
Size
S
C
TENSILE Strength
Qty. Per
Package
(at beginning of Catalog Number) Approximate
M = Miniature (18 lbs.)
Bundle Diameter I = Intermediate (40 lbs.)
for ties
S = Standard (50 lbs.)
LH = Light-Heavy Duty (120 lbs.)
Family:
H = Heavy Duty (175 lbs.)
T = Standard One-Piece Cable Tie
EH = Extra-Heavy Duty (250 lbs.)
MET = Stainless Steel Barb Tie
1-800-435-0705 for Customer Service
Style
_
IL
MH
PM
RL
ID
MB
LPMB
=
=
=
=
=
=
=
=
Standard Tie
In-Line
Mounting
Push Mount
Releasable
Identification
Mounting Base
Low Profile
Mounting Base
MP = Mounting Pad
CCL = Cable Clamp
L
C
D
M
=
=
=
=
50
100
500
1000
Color
_
0
8
30
701
=
=
=
=
=
Natural
UV Black
Gray
Heat Stabalized Black
Halar
www.idealindustries.com
D-9
Cable Ties & Tools
15-991
41-995
Cable Staples
■ Full line of quality insulated and non-insulated staples to
fit all cabling applications
■ Packaged to answer electrician’s need for clean, dry, rustfree staples
■ Convenient reclosable containers keep staples organized
in the truck and on the job-site
Cable Staples
Carbon Steel Staples
Plastic Insulated Cable Stacker
■ Use with wider cable such as
Romex®, NM and UF
■ Use with wider cable such as
Romex®, NM and UF
■ High-grade carbon steel construction
■ High-grade carbon steel
construction
■ Sharp-point legs drive straight without
splitting wood
■ Smooth plastic saddle prevents
damage to cable
■ Resist rust and corrosion
Cat. No.
■ Zinc-plated nails resist rust and
corrosion
Description
Quantity/Package
1/2 in. x 1 in.
100/Box
BCS1-1
1/2 in. x 1 in.
500/Jar
BCS1-JR
Description
Quantity/Package
Cat. No.
50/Bag
BPS2/2-50
1/2 in. x 1 in.
500/Box
BCS1-5
1/2 in. 2 Cable Stacker
1/2 in. x 1 in.
5,000/Bucket
BCS1-5M
1/2 in. 3 Cable Stacker
50/Bag
BPS2/3-50
100/Box
BCS2-1
1/2 in. 4 Cable Stacker
50/Bag
BPS2/4-50
9/16 in. x 1-1/4 in.
400/Jar
BCS2-JR
9/16 in. x 1-1/4 in.
500/Box
BCS2-5
9/16 in. x 1-1/4 in.
5,000/Bucket
BCS2-5M
9/16 in. x 1-1/4 in.
Plastic Insulated Staples
Insulated Staples
■ Use with wider cable such as
Romex®, NM and UF
■ Use with wider cable such as
Romex®, NM and UF
■ Smooth plastic saddle prevents
damage to cable
■ High-grade carbon steel with flexible PVC insulation
■ Sharp-point legs drive straight without splitting wood
■ Zinc-plated nails resist rust and
corrosion
Description
■ Resist rust and corrosion
Quantity/Package
Cat. No.
Description
Quantity/Package
Cat. No.
1/2 in. Insulated
50/Bag
BPS2-50
1/2 in. x 1 in.
100/Box
B1CS-1
1/2 in. Insulated
100/Bag
BPS2-1
1/2 in. x 1 in.
450/Jar
B1CS-JR
1/2 in. Insulated
200/Jar
BPS2-JR
1/2 in. x 1 in.
500/Box
B1CS-5
1/2 in. Insulated
400/Jar
BPS2B-JR
1/2 in. x 1 in.
5,000/Bucket
B1CS-5M
1/2 in. Insulated
500/Bag
BPS2-5
9/16 in. x -1/4 in.
100/Box
B1CS2-1
1/2 in. Insulated
5,000/Bucket
BPS2-5M
9/16 in. x -1/4 in.
350/Jar
B1CS2-JR
3/4 in. Insulated
50/Bag
BPS3-50
9/16 in. x -1/4 in.
500/Box
B1CS2-5
3/4 in. Insulated
100/Bag
BPS3-1
9/16 in. x -1/4 in.
5,000/Bucket
B1CS2-5M
3/4 in. Insulated
175/Jar
BPS3-JR
3/4 in. Insulated
250/Bag
BPS3-2
Romex® is a registered trademark of General Cable Co.
D-10
www.idealindustries.com
1-800-435-0705 for Customer Service
Carbon Steel Service Entrance Staples
Sound Straps
■ Use with service entrance cable
and conduit
■ Use with smaller insulated wire
and cord applications such as
lamps, thermostats, telephones
and sound systems
■ High-grade carbon steel
construction
■ Smooth plastic saddle prevents
damage to wires
■ Sharp-point legs drive straight
without splitting wood
■ Zinc-plated nails resist rust and
corrosion
■ Resist rust and corrosion
Description
Quantity/Package
Cat. No.
Quantity/Package
Cat. No.
1-5/16 in. x 3/4 in.
100/Box
BMSE150-1
3/16 in. White
25/Clamshell
772804
1-1/2 in. x 1-1/16 in.
100/Box
BMSE175-1
3/16 in. White
100/Clamshell
772805
3/16 in. White
250/Jar
BPLVSW-JR
3/16 in. Black
25/Clamshell
772810
3/16 in. Black
100/Clamshell
772812
3/16 in. Black
250/Jar
BPLVSB-JR
Plastic Insulated Service Entrance Straps
■ Use with service entrance cable
and conduit
Description
■ Smooth plastic saddle
prevents damage to cable
Fiber Insulated Cable Staples
■ Zinc-plated nails resist rust and
corrosion
■ Use with smaller wire and cord
applications such as low voltage
bells, thermostats, telephones
and sound systems
Description
Quantity/Package
Cat. No.
#6 SER & 1/2 in. EMT
50/Bag
BSER6-50
#6 & #8 SEU
50/Bag
BSEU6-50
#2 SER & 3/4 in. EMT
25/Bag
BSER2-25
#2 SEU
25/Bag
BSEU2-25
■ Sharp-point legs drive straight
without splitting wood
4/0 SER
5/Bag
BSER4/0-5
■ Resist rust and corrosion
4/0 SEU
5/Bag
BSEU4/0-5
Coaxial Cable Straps
■ Insulated fiber provides
enhanced strength and dielectric
resistance
Description
Quantity/Package
Cat. No.
Brown Fiber
40/Clamshell
772840
White Fiber
40/Clamshell
772841
■ Use with round cable such as
CATV/VCR and phone cables or
with plastic and metal tubing
Metal Insulated Staple
■ Smooth plastic saddle
prevents damage to cable
■ Use with wider cable such as
Romex®, NM and UF
■ Zinc-plated nails resist rust and
corrosion
■ Resists rust and corrosion
Description
PostScriptPicture
Po
st
Staples 3A.eps
St Scr
ap
i
le ptP
s
3A ict
.e ur
ps e
■ Blue plastic saddle prevents wire
damage
Quantity/Package
Cat. No.
1/4 in. Black
25/Clamshell
772806
1/4 in. Black
100/Clamshell
772807
1/4 in. Black
250/Jar
BPCXSB-JR
1/4 in. White
25/Clamshell
1/4 in. White
100/Clamshell
772809
1/4 in. White
250/Jar
BPCXSW-JR
1/16 in. White
50/Bag
BPS4-50
1-800-435-0705 for Customer Service
772808
Description
1/2 in. Metal Staple w/Plastic Insulator
re
ctu
tPi
rip
ps
tSc
A.e
3
s
Pos
ple
Sta
Quantity/Package
Cat. No.
200/Jar
BMICS-JR
www.idealindustries.com
D-11
Wire Markers & Cable Ties
Wire Management
Thermo-Shrink® Thin-Wall
Heat Shrinkable Tubing Disks
Heat Shrinkable Tubing
Thermo-Shrink® Heat Shrinkable Tubing Specifications
Properties
Heat Shrink
Thin Wall
Heavy Wall
End Caps
Shrink
Temperatures
120°C to 250°C
(200°C
recommended)
120°C to 250°C
(200°C
recommended)
120°C to 250°C
(200°C
recommended)
Continuous
Operating
Temperature
-55°C to 135°C
-55°C to 110°C
-55°C to 110°C
2,200 PSI min.
2,000 PSI min. (1/4 in.)
2,100 PSI min.
2,100 PSI
400% min.
600% min.
600% min.
Secant
Modulus @ 2%
Strain
25,000 PSI max.
25,000 PSI max.
N.A.
Specific Gravity
Tensile
Strength (PSI)
Ultimate
Elongation
■ Space-saving, no-waste dispenser holds up to four feet of
thin-wall tubing
■ TS-46 irradiated cross-linked polyolefin with 2:1 standard
shrink ratio
■ Forms tough, smooth insulated covering resistant to common
fluids and solvents
1.30 max.
1.20 max.
1.10 max.
Heat Aging,
168 hrs. @ 175°C
Tensile Strength
Elongation
350%
500%
500%
Heat Shock, 4 hrs.
@ 225°C
No cracks,
flowing or
dripping
No cracks,
flowing or
dripping
No cracks,
flowing or
dripping
Selfextinguishing
Selfextinguishing
Selfextinguishing
■ Shrink temperature of 120°C
-55°C
-55°C
-55°C
Tubing
Size
Expanded Recovered
(Inches) I.D. (Min.) I.D. (Max.)
Flammability
Low Temperature
Brittle Point
Volume
Resistivity
10 ohm-cm min.
14
10 ohm-cm min. 10 ohm-cm min.
13
14
■ Flame–retardant material
■ Meets UL 224, 125°C; CSA C22.2 No. 198.1, 125°C;
MIL-DTL-23053/5 Class 1 & 2; AMS 3636 & 3637; DEF STAN
59-97, Issue 3, Type 2a
■ Continuous operating temperature from -55°C to 135°C
Wire
Size*
Nominal
Recovered Wall
Thickness
Cat.
No.
22-18 AWG
.018
46-600
3/64
.046
.023
Dielectric Strength
600V/mil min.
500V/mil min.
500V/mil min.
1/16
.063
.031
16 AWG
.018
46-601
Corrosive Effect
Non-corrosive
Non-corrosive
Non-corrosive
3/32
.093
.046
14-12 AWG
.020
46-602
Good to
excellent
1/8
.125
.062
24-20 AWG
.020
46-603
3/16
.187
.093
20-14 AWG
.020
46-604
0.2%
1/4
.250
.125
14-8 AWG
.025
46-605
No
growth
5/16
.312
.156
4-1 AWG
.025
46-606
3/8
.375
.187
8-4 AWG
.025
46-607
+1%/-10%
1/2
.500
.250
4-1 AWG
.025
46-608
Solvent Resistance
24 hrs. Immersion
per MIL-DTL-23053
Water Absorption
Fungus
Resistance
Good to
excellent
0.5%
No
growth
Longitudinal
Change, 3 min.
+1%/-10%
Good to
excellent
0.5%
No
growth
+1%/-10%
All values are typical performance data and are not to be used as design data
3/4
.750
.375
2-250 KCMIL
.030
46-609
1
1.000
.500
2/0-500 KCMIL
.035
46-610
*Consult the wire manufacturer’s catalog for specific O.D. of wire and insulation
Thermo-Shrink® Underground Splices
■ Direct burial rated
■ Heavy-wall heat shrinkable tubing — TS-46 irradiated
cross-linked polyolefin with 3:1 standard shrink ratio
■ Adhesive liner provides complete insulation and protection
■ Simple one-piece design saves time and money
Description
Cat. No.
U.F. Splice Kit (UL Listed) – 14 to 8 AWG
46-400
Al/Cu Underground Splice Kit – 8 to 2 AWG, 600V
46-401
Underground Splice Kit – 4 AWG to 1/0, 600V
46-402
Underground Splice Kit – 1/0 to 250 KCMIL, 600V
46-403
D-12
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Thermo-Shrink® Heavy-Wall
Heat Shrinkable Tubing
■ TS-46 irradiated cross-linked polyolefin with 2:1 standard
shrink ratio
■ Forms tough, smooth insulated covering resistant to common
fluids and solvents
■ Flame–retardant material
■ Meets UL 224, 125°C; CSA C22.2 No. 198.1, 125°C;
MIL-DTL-23053/5 Class 1 & 2; AMS 3636 & 3637;
DEF STAN 59-97, Issue 3, Type 2a
■ Meets UL 486D, CSA C22.2 No. 198.2, ANSI C119.1, Western
Underground Guides Nos. 2.4, 2.5, MIL-DTL-23053/15, IEEE
383 Vertical Flame Test, ANSI C37.20.2, ICEA S-19-8 and
NEMA insulation thickness requirements
■ Shrink temperature of 120°C
1/8
3/16
1/4
3/8
1/2
3/4
1
.125
.187
.250
.375
.500
.750
1.000
Nominal
Recovered
Wire
Wall Thickness Size* Length
.062
.093
.125
.187
.250
.375
.500
■ Continuous operating temperature from -55°C to 110°C
Cat.
No.
.020
24-20
AWG
6 in. 46-310
2 ft. 46-311
1,000 ft. 46-312
.020
20-14
AWG
6 in. 46-313
2 ft. 46-314
1,000 ft. 46-315
.025
.025
.025
.030
.035
14-8
AWG
8-4
AWG
4-1
AWG
2-250
MCM
2/0-500
MCM
■ Adhesive liner provides complete insulation and protection to
electrical splices in above-grade, underground or underwater
applications
■ Maximum flame retardancy
■ Continuous operating temperature from -55°C to 135°C
Tubing
Expanded Recovered
Size (In.) l.D. (Min.) I.D. (Max.)
■ TS-46 irradiated cross-linked polyolefin
with 3:1 standard shrink ratio
6 in. 46-316
2 ft. 46-317
500 ft. 46-318
6 in. 46-319
2 ft. 46-320
200 ft. 46-321
6 in. 46-322
2 ft. 46-323
200 ft. 46-324
6 in. 46-325
2 ft. 46-326
200 ft. 46-327
6 in. 46-328
2 ft. 46-329
100 ft. 46-330
■ Rated for 600V, 90°C continuous use
■ Shrink temperature of 120°C
Model
Nominal
Expanded Recovered
Recovered
Cable Length
l.D. (Min.) I.D. (Max.) Wall Thickness Sizes* (Inches)
Cat.
No.
TS-46-400
.400
.150
.060
8-6
AWG
6
9
48
46-343
46-344
46-346
TS-46-750
.750
.240
.090
6-2
AWG
6
9
48
46-347
46-348
46-350
TS-46-1100
1.100
.350
.120
1-3/0
AWG
6
9
48
46-351
46-352
46-354
TS-46-1500
1.500
.470
.160
2/0350
MCM
9
12
48
46-356
46-357
46-358
TS-46-2000
2.000
.630
.160
250500
MCM
9
18
48
46-369
46-371
46-372
Length
(Inches)
Cat.
No.
*Consult the wire manufacturer's catalog for specific O.D. of wire
and insulation
*Consult the wire manufacturer's catalog for specific O.D. of wire and insulation
Thermo-Shrink® Medium-Wall Heat Shrinkable End Caps
■ TS-46 irradiated cross-linked polyolefin
■ Adhesive liner provides complete environmental protection
and insulation
■ Provide water-tight seal and resist corrosion, oils and chemicals
■ Heat indicating lines
■ Protect cable ends during storage
■ Continuous operating temperature from -55°C to 110°C
■ Rated for 600/1,000V, 90°C continuous use
■ Shrink temperature of 120°C
1-800-435-0705 for Customer Service
Expanded Recovered
Recovered
l.D. (Min.) I.D. (Max.) Wall Thickness
Cable Sizes
.40
.15
.080
8-1 AWG
3.0
46-381
1.10
.40
.080
2/0-500 MCM
4.0
46-382
1.50
.50
.080
500-1,500 MCM
4.5
46-383
2.75
1.00
.080
2,000-2,500 MCM
5.0
46-384
4.70
1.57
.080
—
6.5
46-387
www.idealindustries.com
D-13
Heat Shrink
Thermo-Shrink® Thin-Wall
Heat Shrinkable Tubing
Thermo-Shrink®
Heat Shrink Kit
Heat Elite Pro Heat Gun
Kit includes:
■ Eleven sizes of thin-wall
heat shrinkable tubing
disks (3/64 in. — 1 in.)
■ Small deflector
■ Premium T®-Cutter
Wire Cutter
■ Temperature range — 180°F - 1020°F (100 - 550°C)
■ Two-step switch for heat and air flow adjustments
Heat Guns
Description
Cat. No.
Kit includes: 45-223, 46-203, 46-923, 46-941,
& 46-600 through 46-610
46-007
■ Double-insulated power cord
■ Ergonomical distribution of weight
■ Comfortable non-slip handle for ease of use
■ Potentiometer for infinitely temperature adjustment
Heat Elite Heat Gun
■ UL and CUL Listing
Description
Cat. No.
Heat Elite Pro
46-203
Heat Elite Pro, 230V
46-206
■ Temperature range — 930°F (500°C)
■ Two-step switch for heat and air flow adjustments
■ Double-insulated power cord
Heat Elite Plus Heat Gun
■ Ergonomical distribution of weight
■ Comfortable non-slip handle for ease of use
■ UL and CUL Listing
Description
Cat. No.
Heat Elite
46-202
Heat Elite, 230V
46-205
■ Temperature range — 180°F - 1200°F (80 - 650°C)
■ Double-insulated power cord
■ Ergonomical distribution of weight
■ Comfortable non-slip handle for ease of use
■ LCD display with memory functions
■ Temperature and airflow adjustments
■ Stand-by mode to minimize the energy consumption
■ Ceramic heating element ensures long-term coil performance
■ UL and CUL Listing
Accessories
Description
Cat. No.
Description
Cat. No.
Heat Elite Plus LCD
46-204
Small Deflector, 1-1/4 in. diameter (For use with all Heat Elite Heat Guns)
46-941
Heat Elite Plus LCD, 230V
46-207
Reduction Adapter (For use with 46-203 and 46-204)
46-950
Glass Protection Adapter (For use with all Heat Elite Heat Guns)
46-951
Welding Adapter (For use with 46-203 and 46-204)
46-952
Solder Reflector Adapter (For use with 46-204)
46-953
Wide-shot Adapter (For use with all Heat Elite Heat Guns)
46-954
Overlap Adapter (For use with 46-203 and 46-204)
46-955
Pressure Roller (For use with 46-204)
46-956
D-14
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Wire Marker Booklets
■ Convenient pocket-size booklets
■ Plastic-impregnated cloth construction for long-lasting durability
■ Resists abrasion, moisture, dirt and oil
■ Perforated 1-1/2 in. markers can be separated into half-length sizes
■ Non-smear black legend ensures high visibility
■ For applications above or below ground
Solid Letters
and Numbers*
Specifications:
Temperature Range: -40°F to 180°F (-40°C to 82°C)
Adhesion: 45 oz./in. width ultimate
Legend
Cat. No.
Legend
Cat. No.
Legend
Cat. No.
A
44-112
M
44-124
Y
44-136
B
44-113
N
44-125
Z
44-137
C
44-114
O
44-126
0
44-138
D
44-115
P
44-127
1
44-139
E
44-116
Q
44-128
2
44-140
F
44-117
R
44-129
3
44-141
G
44-118
S
44-130
4
44-142
H
44-119
T
44-131
5
44-143
I
44-120
U
44-132
6
44-144
J
44-121
V
44-133
7
44-145
K
44-122
W
44-134
8
44-146
L
44-123
X
44-135
9
44-147
*Ten pages per booklet with each page bearing the legend assortment indicated. All booklets contain
450 wire markers and 450 terminal markers.
Legend Assortments*
Legend
Load Centers
Quantity
Cat. No.
0-9
45 Markers each
44-101
A-Z
0-15
+, –, /
10 Markers each
44-102
1-45
10 Markers each
44-103
46-90
10 Markers each
44-104
Description
Cat. No.
1, 2, 3
150 Markers each
44-105
Load Center Wire Marker Booklet
44-154
A, B, C
150 Markers each
44-106
T1, T2, T3
150 Markers each
44-107
L1, L2, L3
150 Markers each
44-108
1-15
16-90
A-Z
+, –, /, 0
6 Markers each
4 Markers each
2 Markers each
2 Markers each
44-109
1, 2, 3
A, B, C
T1, T2, T3
L1, L2, L3
45 Markers each
45 Markers each
30 Markers each
30 Markers each
44-110
+, –, AC, DC
POS, NEG, GND
NEUT
SPARE, BLANK
45 Markers each
33 Markers each
27 Markers each
21 Markers each
Write-On Marker Booklets*
■ Use for developing personal identification
systems
■ Surface accepts pen, pencil or rubber
stamp
Marker Size*
(Inches)
44-111
*Ten pages per booklet with each page bearing the legend assortment indicated. All booklets (except
44-111) contain 450 wire markers and 450 terminal markers. Booklet 44-111 includes 348 wire
markers and 348 terminal markers.
1-800-435-0705 for Customer Service
■ Contains common household
legends — bedroom, living
room, dryer, water
heater, security
system, etc.
Markers
per page
Pages
per book
Cat. No.
1 x 2-1/2
6
10
44-151
1x5
3
10
44-152
1 x 2-1/2 &
1x5
6
3
5
5
44-153
*Write-on area for 2-1/2 in. markers is 3/4 in. x 1 in. Write-on area for 5 in. markers is 1 in. x 1 in.
Adhesion: .25 oz./in. width ultimate
www.idealindustries.com
D-15
Wire Markers
■ Self-sticking on wire and cable
Wire Marker Cards
■ Use for positive identification and keying of wires,
terminal blocks, etc.
■ Convenient pocket-size cards
Consecutive Numbers
■ Bold, easy-to-read black characters
Wire Markers
■ Self-sticking on wire and cable
Legend
■ Polyester film over laminate/cloth construction for
long-term durability
0-9 (Repeated)
1-33
■ Resists abrasion, moisture, dirt and oil
34-66
■ Individual markers measure 1-1/2 in. long
67-99
100-124
Specifications:
Temperature Range: -40°F to 180°F (-40°C to 82°C)
Adhesion: 45 oz./in. width ultimate
Markers
per legend
Markers
per card
Cat. No.
3
30
43-953
1
33
43-875
1
33
43-876
1
33
43-877
1
25
43-878
125-149
1
25
43-879
150-174
1
25
43-880
175-199
1
25
43-881
200-224
1
25
43-882
225-249
1
25
43-883
Solid Numbers
Legend
Cat. No.
Legend
Cat. No.
Legend
Cat. No.
Legend
0
43-000
A
43-601
1
43-001
B
43-602
2
43-002
C
3
43-003
4
43-004
5
Cat. No.
K
43-611
U
43-621
L1
43-747
L
43-612
V
43-622
L2
43-748
43-603
M
43-613
W
43-623
L3
43-749
D
43-604
N
43-614
X
43-624
T1
43-772
E
43-605
O
43-615
Y
43-625
T2
43-773
43-005
F
43-606
P
43-616
Z
43-626
T3
43-774
6
43-006
G
43-607
Q
43-617
A-Z
43-960
7
43-007
H
43-608
R
43-618
A1
43-692
8
43-008
I
43-609
S
43-619
A2
43-693
9
43-009
J
43-610
T
43-620
A3
43-694
Write-On Marker Cards
Marking Pens
■ Use for developing personal
identification systems
■ Fast-drying, permanent ink
will not smear
■ Cloth write-on surface
■ Use on write-on marker cards
and write-on cable-tie
marker plates
■ Accepts most writing instruments
Legend
Cat. No.
■ Color-coded in
red or black
Marker Size
(Inches)
Markers
per card
Cat. No.
1 x 1-1/2
9
44-752
5/8 x 1-1/2
14
44-753
D-16
www.idealindustries.com
Description
Cat. No.
Marking Pen w/black ink
41-697
Marking Pen w/red ink
41-698
1-800-435-0705 for Customer Service
Wire Management
Wire Marker Dispenser Refill Rolls
Wire Marker
Dispensers
■ Convenient pocket-size
case (3 in. x 6 in.) holds
10 wire marker rolls
■ Flip top for easy access and refill
Description/Legend
Cat. No.
■ Built-in hook for hanging from belt or tool pouch
Refill pack with 1 each of 0-9 legend rolls
42-399
■ High-quality adhesive and 3 mil. thickness provide long-lasting,
low-profile application
■ Each plastic reel holds 8 ft. of polyester tape
Specifications:
Temperature Range: -40°F to 180°F (-40°C to 82°C)
Adhesion: 25 oz./in. width ultimate
Description
Cat. No.
Dispenser w/0 through 9 legend rolls
42-301
Dispenser only
42-303
Legend
Cat. No.
Legend
Cat. No.
0
42-400
5
42-405
1
42-401
6
42-406
2
42-402
7
42-407
3
42-403
8
42-408
4
42-404
9
42-409
Bin Markers
■ Use for customizing identification system at job site or in warehouse
■ High-adhesion properties with easy removability
■ Vinyl-impregnated cloth construction for long-term durability
■ Resist abrasion, moisture, dirt and oil
■ Non-smear, black legend on bright yellow background for
high visibility
Extra Large:
6 markers/cd.
1-1/2 in. x 3-1/2 in. each
w/3 in. type
Medium:
10 markers/cd.
7/8 in. x 1-1/2 in. each
w/1 in. type
Large:
10 markers/ cd.
7/8 in. x 2-1/4 in. each w/2 in. type
Small:
32 markers/cd.
9/16 in. x 3/4 in. each
w/5/8 in. type
Extra Large
Cat. No.
Large
Cat. No.
Medium
Cat. No.
Small
Cat. No.
0
44-590
44-580
44-570
44-560
1
44-591
44-581
44-571
44-561
2
44-592
44-582
44-572
44-562
3
44-593
44-583
44-573
44-563
4
44-594
44-584
44-574
44-564
5
44-595
44-585
44-575
44-565
6
44-596
44-586
44-576
44-566
7
44-597
44-587
44-577
44-567
8
44-598
44-588
44-578
44-568
9
44-599
44-589
44-579
44-569
44-734
44-733
44-732
44-731
44-739
44-738
44-737
44-736
Legend
Solid Numbers
Combinations
1 thru 5 (3 cards ea.) and
6 thru 0 (2 cards ea.)
A thru Z (1 card ea.)
1-800-435-0705 for Customer Service
www.idealindustries.com
D-17
Wire Markers
■ Dispenser tab holds
tapes firmly in
place — allows
removal of proper
tape length without waste
Voltage and Conduit Markers
Large:
1 marker per card
2-1/4 in. x 9 in. each w/1-3/4 in. type
Medium:
4 markers per card
1-1/8 in. x 4-1/2 in. each w/3/4 in. type
Wire Markers
Small:
18 markers per card
2-1/4 in. x 1/2 in. each w/5/16 in. type
Legend
Large
Cat. No.
Medium
Cat. No.
Small
Cat. No.
120/208V
44-295
44-296
44-297
277/480V
44-298
44-299
44-300
110V
44-301
44-351
44-401
120V
44-303
44-353
44-403
208V
44-305
44-355
44-405
220V
44-306
44-356
44-406
230V
44-307
44-357
44-407
240V
44-308
44-358
44-408
277V
44-310
44-360
44-410
■ Identify junction boxes, switches, circuit breakers, raceways,
pipe and fuse boxes
380V
44-311
44-361
44-411
440V
44-312
44-362
44-412
■ Non-conductive for user safety
460V
44-313
44-363
44-413
■ High-adhesion properties with easy removability
480V
44-314
44-364
44-414
■ Vinyl-impregnated cloth construction provides long-lasting
durability
600V
44-317
44-367
44-417
2,400V
44-321
N/A
N/A
■ Resist abrasion, moisture, dirt and oil
4,160V
44-322
N/A
N/A
■ Non-smear, black legend on bright orange background for
high visibility
13,800V
44-328
N/A
N/A
DANGER
44-289
N/A
N/A
Specifications:
Temperature Range: -40°F to 180°F (-40°C to 82°C)
Adhesion: 45 oz./in. width ultimate
HIGH VOLTAGE
44-292
N/A
N/A
SINGLE PHASE
44-340
44-390
44-440
THREE PHASE
44-342
44-392
44-442
Flash Protection Labels and Signs
National Electric Code 110.16 Flash Protection: Switchboards, panel boards, industrial control panels, and motor control
centers, in other than dwelling occupancies, that are likely to require examination, adjustment, servicing or maintenance while energized,
shall be field marked to warn qualified persons of potential electric arc flash hazards. The marking shall be located so as to be clearly visible to
qualified persons before examination, adjustment, servicing or maintenance of the equipment.
Required Labels –
44-892/44-893
Recommended Signs –
44-896/44-897
Arc Flash Labels
44-894/44-895
Description
Type
Size
NEC Arc Flash, Warning
Self-Sticking polyester
NEC Arc Flash, Warning
Self-Sticking polyester
NEC Arc Flash, Danger
NEC Arc Flash, Danger
NEC Arc Flash, Warning
NEC Arc Flash, Warning
D-18
Qty./Bag
Cat. No.
3-1/2 in. x 5 in.
5
44-892
5 in. x 7 in.
5
44-893
Self-Sticking polyester
5 in. x 7 in.
5
44-894
Self-Sticking polyester
4 in. x 6 in.
5
44-895
Self-Sticking polyester
7 in. x 10 in.
1
44-896
Fiberglass
10 in. x 14 in.
1
44-897
www.idealindustries.com
1-800-435-0705 for Customer Service
Wire Management
Barricade Tapes
Detectable
Underground Tapes
■ Solid aluminum foil core tapes
for protection, location and
identification of
underground utility
installations
■ Formulated to resist degradation from acid and alkali found in soils
■ Lead-free pigments and organic lead-free ink
Property
Method
Value
Thickness
ASTMD2103
5.0 Mils
Elongation
ASTMD882-75B
80%
IDEAL Specs.
Bottom layer virgin PE
Top layer virgin PET
Foil industry standard
Composition
Tensile Strength
Legend
ASTMD882
■ High-visibility safety yellow or red polyethylene construction
with bold black letters
■ Meets OSHA specifications Section 1010.144 for marking
physical hazards
Property
Method
Value
ASTM D88-75B
≥ 400%
Composition
IDEAL Specs.
100% virgin LDPE
Tensile Strength
ASTM D882
2,350 PSI TD
1,893 PSI MD
Elongation
35 lbs./in. (15,000 PSI)
Color
Size
Cat. No.
Caution Buried
Electric Line Below
Red
3 in. x 1,000 ft.
42-201
Caution Buried
Electric Line Below
Red
6 in. x 1,000 ft.
42-251
Non-Detectable
Underground Tapes
■ For protection, location
and identification of
underground utility
installations
Legend
Color
Size
Thickness
Cat. No.
Caution
Yellow
3 in. x 1,000 ft.
4.0 Mils
42-001
Caution Do Not Enter
Yellow
3 in. x 1,000 ft.
4.0 Mils
42-002
Caution High Voltage
Yellow
3 in. x 1,000 ft.
4.0 Mils
42-003
Danger
Red
3 in. x 1,000 ft.
4.0 Mils
42-051
Danger High Voltage
277V/480V Keep Out
Red
3 in. x 1,000 ft.
4.0 Mils
42-052
Legend
Color
Size
Thickness
Cat. No.
Caution
Yellow
3 in. x 1,000 ft.
2.0 Mils
42-011
Caution Do Not Enter
Yellow
3 in. x 1,000 ft.
2.0 Mils
42-012
Red
3 in. x 1,000 ft.
2.0 Mils
42-015
Danger
■ Formulated to resist degradation from acid and alkali
found in soils
■ Lead-free pigments and organic lead-free ink
Property
Method
Value
Thickness
ASTMD2103
4.0 Mils
Elongation
ASTMD882-75B
500%
IDEAL Specs.
100% virgin LDPE
ASTMD882
2,750 PSI
Composition
Tensile Strength
Recommended Burial Depth
3 in. Tape – 4 in. to 6 in.
6 in. Tape – less than 12 in.
Legend
Color
Size
Cat. No.
Caution Buried Electric
Line Below
Red
3 in. x 1,000 ft.
42-101
Caution Buried Electric
Line Below
Yellow
3 in. x 1,000 ft.
42-102
Caution Buried Telephone
Line Below
Orange
3 in. x 1,000 ft.
42-103
Caution Buried Fiber Optic
Line Below
Orange
3 in. x 1,000 ft.
42-104
Caution Buried Electric
Line Below
Red
6 in. x 1,000 ft.
42-151
Caution Buried Electric
Line Below
Yellow
6 in. x 1,000 ft.
42-152
1-800-435-0705 for Customer Service
www.idealindustries.com
D-19
Safety Tapes
■ Meets or exceeds industry standards including the American
Public Works Association (APWA) color code
Lockout/Tagout
Basic Lockout/Tagout Kit
Standard Lockout/Tagout Kit
■ A great selection of the most popular lockout/tagout devices
■ Excellent selection of lockout/tagout devices, tags and locks
for maintenance workers or contractors
■ Small nylon zipper pouch features belt loops and rings to clip
to belt or tool pouch
Description
Cat. No.
Basic Lockout/Tagout Kit
Kit 44-970 Includes:
Qty.
■ Small nylon zipper pouch features belt loops and rings to clip
to belt or tool pouch
44-970
Description
Cat. No.
Standard Lockout/Tagout Kit
Cat. No.
44-971
Hinged Single-Pole Breaker Lockout
2
44-810
Kit 44-971 Includes:
Universal 277V Breaker Lockout/Single Pole
1
44-809
Hinged Single-Pole Breaker Lockout
3
44-810
480/600V Breaker Lockout
1
44-807
Universal 277V Breaker Lockout/Single Pole
2
44-809
1
44-789
480/600V Breaker Lockout
1
44-807
3/4 in. Red Padlock
1
44-906
Wall Switch Lockout
1
44-789
1 in. Safety Lockout Hasp
1
44-800
110V Small Plug Lockout
1
44-718
Lockout Tags – Do Not Operate (striped)
5
44-833
2 in. Shackle Red Padlocks
2
44-906
Universal Multi-Pole Breaker Lockout
1
44-783
1 in. Safety Lockout Hasps
2
44-800
5
44-830
Wall Switch Lockout
Qty.
Cat. No.
110V Plug Lockout
1
44-818
Lockout Tags – Do Not Operate
Zipper Pouch
1
IA-3240
Lockout Tags – Do Not Operate (striped)
5
44-833
Cleat for 277V Breaker Lockout
1
44-785
1
44-786
Quantities listed in kit description are for individual pieces, not carded packages.
Description
Cat. No.
Cleat for 480/600V Breaker Lockout
Basic Plus Lockout/Tagout Kit
44-979
Universal Multi-Pole Breaker Lockout
2
44-783
Zipper Pouch
1
IA-3240
Kit 44-979 Includes all 44-970 PLUS:
Qty.
Cat. No.
Gate Valve Lockout
1
44-824
Ball Valve Lockout
1
44-820
Quantities listed in kit description are for individual pieces, not carded packages.
Starter Lockout/Tagout Kit
Description
Cat. No.
Starter Lockout/Tagout Kit
Kit 44-973 Includes:
44-973
Qty.
Cat. No.
1
44-809
Universal Multi-Pole Lockout
1
44-783
3/4 in. Shackle Red Padlock
1
44-906
1 in. Safety Lockout Hasp
1
44-800
Lockout Tags – Do Not Operate (striped)
2
44-833
110V Plug Lockout
1
44-818
Zipper Pouch
1
IA-3240
Universal 277V Breaker/Single-Pole Lockout
Quantities listed in kit description are for individual pieces, not carded packages.
D-20
www.idealindustries.com
■ A starter selection of the lockout/tagout devices every
electrician/maintenance person needs
■ Small nylon zipper pouch features belt loops and rings to clip
to belt or tool pouch
1-800-435-0705 for Customer Service
Wire Management
Industrial Lockout/Tagout Kit
■ Ideal for plant facility personnel to keep all lockout/tagout
devices in one convenient place
■ An industrial selection of lockout/tagout devices
Lockout/Tagout
Plant Facility Lockout/Tagout Kit
■ Polypropylene plastic tool box resists oil and chemicals
■ Polypropylene plastic tool box resists oil and chemicals
Description
Cat. No.
Description
Cat. No.
Plant Facility Lockout/Tagout Kit
44-972
Industrial Lockout/Tagout Kit
44-974
Kit 44-972 Includes:
Qty.
Cat. No.
Kit 44-974 Includes:
Qty.
Cat. No.
Hinged Single-Pole Breaker Lockout
5
44-810
Hinged Single-Pole Breaker Lockout
3
44-810
Universal 277V Breaker/Single Pole Lockout
3
44-809
Universal 277V Breaker/Single Pole Lockout
2
44-809
480/600V Breaker Lockout
1
44-807
480/600V Breaker Lockout
1
44-807
Wall Switch Lockout
2
44-789
Wall Switch Lockout
1
44-789
110V Plug Lockout
1
44-718
110V Small Plug Lockout
1
44-718
1 in. Safety Lockout Hasps
3
44-800
Pneumatic Lockout
1
44-774
Red Labeled Lockout
2
44-791
Ball Valve Lockout
1
44-820
220/550V Plug Lockout
1
44-819
1 in. Safety Lockout Hasp
2
44-800
Lockout Tags – Do Not Operate
10
44-830
Red Labeled Lockout
1
44-791
Lockout Tags – Do Not Operate (striped)
10
44-833
220/550V Plug Lockout
1
44-819
Fuse Blockout
2
44-815
Lockout Tags – Do Not Operate (striped)
10
44-833
Fuse Blockout
2
44-816
Fuse Blockout
1
44-815
Gate Valve Lockout
1
44-824
Fuse Blockout
1
44-816
Cleat for 277V Breaker Lockout
1
44-785
Gate Valve Lockout
1
44-824
Cleat for 480/600V Breaker Lockout
1
44-786
Cleat for 277V Breaker Lockout
1
44-785
Universal Multi-Pole Breaker Lockout
3
44-783
Cleat for 480/600V Breaker Lockout
1
44-786
Tool Box
1
IA-3241
Red Lockout Padlocks
4
44-916
Universal Multi-Pole Breaker Lockout
2
44-783
Tool Box
1
IA-3241
Quantities listed in kit description are for individual pieces, not carded packages.
Quantities listed in kit description are for individual pieces, not carded packages.
1-800-435-0705 for Customer Service
www.idealindustries.com
D-21
Industrial Lockout/Tagout Station
Machine Lockout
Station
■ Conveniently mounts on either a
wall, machinery or table top
■ Yellow acrylic station helps
maintain a focal point for storing
your plug lockout between
usage applications
Lockout/Tagout
Description
Cat. No.
Machine Lockout/Tagout Station – 8-1/2” H x 8-1/2” W x 4” D
44-976
Kit 44-976 Includes:
Qty.
Cat. No.
1
44-916
220/550V Plug Lockout
1
44-819
Lockout Tag – Do Not Operate
2
44-833
Machine Lockout Tagout Board only
1
IA-4991
Red Safety Padlock
■ Large Lockout/Tagout Station can be wall mounted or easily
transported
■ All metal, lockable cabinets come with two adjustable shelves
(extra shelves available)
■ Lockout safety tips are conveniently located inside of door for
frequent reminders of proper lockout procedures
Description
Cat. No.
Industrial Lockout/Tagout Station – 16” H x 14” W x 6” D
44-975
Kit 44-975 Includes:
Circuit Breaker
Lockout Station
■ Polystyrene board is designed to
be mounted on or near
electrical breaker boxes for
instant, easy access
Qty.
Cat. No.
Hinged Single-Pole Breaker Lockout
2
44-810
Universal Single-Pole Breaker Lockout
2
44-809
Cleat for Universal Single-Pole Lockout
2
44-785
Universal Multi-Pole Breaker Lockout
2
44-783
Circuit Breaker Lockout/Tagout Station – 8” H x 6-1/4” W x 2-3/4” D
44-977
480/600V Breaker Lockout
1
44-807
Kit 44-977 Includes:
Qty.
Cat. No.
Cleat for 480/600V Breaker Lockout
1
44-786
Hinged Single-Pole Breaker Lockout
2
44-810
Wall Switch Lockout
1
44-789
Universal Single-Pole Breaker Lockout
2
44-809
1 in. Safety Lockout Hasp
3
44-800
Universal Multi-Pole Breaker Lockout
2
44-783
Red Safety Padlocks
4
44-916
Lockout Tag – Do Not Operate
5
44-833
100V Small Plug Lockout
1
44-718
Red Safety Padlock
1
44-916
220/550V Plug Lockout
1
44-819
Circuit Breaker Lockout/Tagout only
1
IA-4992
Lockout Tags – Do Not Operate
10
44-833
Gate Valve Lockout - 1 in. to 2-1/2 in.
1
44-824
Gate Valve Lockout - 2-1/2 in. to 5 in.
1
44-825
Ball Valve Lockout
1
44-820
Pnuematic Lockout
1
44-774
Cabinet w/two shelves
1
IA-4989
Description
Qty.
Cat. No.
Extra shelf
1
IA-4990
■ Comply with article 430.102B of
the 2002 NEC
Description
Cat. No.
Micro Lockout
Station
■ Compact design can be
mounted on or close by your
lockout job
■ Holds just the necessary
equipment to do a specific
job/function
Description
Cat. No.
Micro Lockout Station - 8” H x 6-1/4” W x 2-3/4” D
Kit 44-978 Includes:
D-22
www.idealindustries.com
44-978
Qty.
Cat. No.
1 in. Safety Lockout Hasp
1
44-800
Red Safety Padlock
1
44-916
Lockout Tags – Do Not Operate
2
44-833
Micro Lockout/Tagout Board only
1
IA-4993
1-800-435-0705 for Customer Service
Wire Management
Lock Stations
■ Provide accessible convenient storage of
locks, tags and safety lockouts
Lockout/Tagout
■ Durable acrylic constructions
Description
Cat. No.
Four-Lock Station (board only)
44-777
Four-Lock Station Kit includes four 3/4 in. Padlocks with blue bumpers (44-900), 25 Heavy-Duty Lockout Tags (44-833) and
three 1 in. Safety Lockout Hasps (44-800)
44-778
Ten-Lock Station (board only)
44-805
Ten-Lock Station Kit includes ten 3/4 in. Padlocks with blue bumpers (44-900), 25 Heavy-Duty Lockout Tags (44-833) and
three 1 in. Safety Lockout Hasps (44-800)
44-806
Lockout/Tagout Training Programs and
Compliance Manuals
Training Video – “Lockout/Tagout for Affected and
Authorized Personnel,” updated January 2002 to meet the
most recent training and regulatory requirements.
1 – Explains hazardous energy sources, lock requirements, tag
requirements, and machinery auditing
2 – Explains requirements for a mandatory written program and
training documentation
Compliance Manual to assist your facility in complying with
Federal Lockout/Tagout Regulations
1 – Reviews the OSHA Standard in understandable, everyday language
2 – Provides a step-by-step program to help you develop your “Lockout/Tagout”
Compliance Program
3 – Outlines the type of information required for employee training
The Real, Real Life Lockout/Tagout Training Video
1 – Information you and your employees need to assist you in complying with
OSHA’s Lockout/Tagout Standards presented in an easy to understand and
entertaining format
2 – This video comes in a plastic storage case and includes a leaders guide, training
handbook with quiz, and wallet card reminder of the 6 steps to “Lock It and Tag It.”
Description
Cat. No.
Lockout/Tagout for Authorized and Affected Personnel Video
44-942
Lockout/Tagout Compliance Manual
44-940
Electrical Safety Related Work Practices OSHA 1910.331 thru 1910.335 & 1910.339 (129 page manual)
44-963
Real, Real Life Lockout/Tagout Training Video
44-941
Real, Real Life Lockout/Tagout Handbooks, 10/pack
44-953
1-800-435-0705 for Customer Service
www.idealindustries.com
D-23
Circuit Breaker Lockout Systems
Comply with the NEW “Disconnecting Means” standard for motor,
motor circuits and controllers in article 430.102B of the 2002
National Electric Code.
■ Adhesive backed rails allow system to be permanently installed
in or just outside of an electrical panel, putting all lockout items
at the point of need.
■ Lockout systems allow the panel door to be shut during
lockout applications.
Lockout/Tagout
■ Optional Panel Spacing Gasket enables panel doors with tight
clearances to be closed during lockout.
■ Kits available for standard 120-277 Volt Panels and SQ D
NQO Series Panels
■ Locks single and multiple pole breakers.
Without Integral Locks
With Integral Locks
■ Use your own padlocks
■ Cables come with master lock base to fit cable key
■ Recommend rail mounted on outside of panel to permit closure
■ Locks are small enough to allow the panel door to be closed
during lockout
■ Panel door can close on 1/16”, vinyl coated, galvanized cable
(panel spacing gasket may be needed on panel doors w/tight
clearances)
Lockouts for Square D and other breakers with a lever
through hole
Description
Cat. No.
Description
Starter Kit Panel Lock System – Integral Locks Square D
44-765
Starter Kit Panel Lock System without Integral Locks Square D
Cat. No.
44-767
Qty.
Cat. No.
Qty.
Cat. No.
Kit 44-767 Includes:
4 in. Mounting Rail
1
44-769
4 in. Mounting Rail
1
44-769
Square D NQO locking cables with integral lock*
2
44-766
Square D NQO locking cables without
integral lock*
2
44-768
Cat. No.
Description
Kit 44-765 Includes:
Lockouts for Standard, Straight Lever Breakers
Description
Cat. No.
Starter Kit Panel Lock System – Integral Locks Standard
44-761
Starter Kit Panel Lock System without Integral Locks Standard
44-763
Kit 44-761 Includes:
Qty.
Cat. No.
Kit 44-763 Includes:
Qty.
Cat. No.
4 in. Mounting Rail
1
44-769
4 in. Mounting Rail
1
44-769
120/277V Locking Cables with Integral Lock*
2
44-762
120/277V Locking Cables without Integral Lock*
2
44-764
Description:
Qty.
Cat. No.
1
44-750
High density, self-adhesive panel spacing
gasket, 3/8 in. x 1 in. x 15 ft.
*Components can be ordered separately by the catalog number listed. They
are packaged in quantities of one.
D-24
www.idealindustries.com
1-800-435-0705 for Customer Service
Universal Multi-Pole Breaker Lockout
Single-Pole Breaker Lockout
■ Works with most major multi-pole breakers with tie-bar type switches
including GE, ITE Sylvania, Challenger, Bryant, Westinghouse, Square
D (2/3 poles) and General Switch Co.
■ Unique screw clamp design works well with most single-pole
breakers
■ Easy to install — thumbscrew secures and locks tie bar in place;
no cable ties or tools required
■ Snap on cleat accessory securely locks out long sliding switch
throws with large angular rotation commonly found on some
Westinghouse, ITE, Square D and Federal Pacific breakers
■ Please see breaker guide for your application.
■ Please see breaker guide for your application
Description
Description
Universal Multi-Pole Breaker Lockout
Qty./Pkg.
Cat. No.
Universal Single-Pole Breaker Lockout
1
44-783
Cleat for Single-Pole Breaker Lockout
Qty./Card
Cat. No.
3
44-809
3
44-785
Hinged Single-Pole Breaker Lockout
Circuit Breaker
Lockout Station
■ Polystyrene board
is designed to be
mounted on or
near electrical
breaker boxes for
instant, easy
access
Description
Cat. No.
Circuit Breaker Lockout/Tagout Station – 8” H x 6-1/4” W x 2-3/4” D
44-977
Kit 44-977 Includes:
Qty.
Cat. No.
Hinged Single-Pole Breaker Lockout
2
44-810
■ Hinged single-pole lockout with locking post design, locks
lever in off position to isolate and prevent breaker use
Universal Single-Pole Breaker Lockout
2
44-809
■ Ideal for applications where panel closure is preferred
Universal Multi-Pole Breaker Lockout
2
44-783
■ Please see breaker guide for your application
Lockout Tag – Do Not Operate
5
44-833
Red Safety Padlock
1
44-916
Description
IA-4992
Hinged Single-Pole Breaker Lockout
Circuit Breaker Lockout/Tagout only
1
Qty./Card
Cat. No.
3
44-810
Comply with article 430.102B of the 2002 National Electric Code.
1-800-435-0705 for Customer Service
www.idealindustries.com
D-25
Lockout/Tagout
Wire Management
Single-Throw/Multi-Pole Breaker Lockout
Large Breaker Lockout
Lockout/Tagout
■ 480/600V lockout device designed primarily for Square D
single-throw/multi-pole circuit breaker switches
■ Snap-on cleat accessory securely locks out long sliding switch
throws with large angular rotation commonly found on some
Westinghouse, ITE, Square D and Federal Pacific breakers
■ Designed to lockout large 480/600V breaker switches up to
2-1/2 in. wide and 7/8 in. thick
■ Please see breaker guide for your application
Description
Qty.
Cat. No.
Single-Throw/Multi-Pole Breaker Lockout
1
44-807
Cleat for Single-Throw/Multi-Pole Lockout
1
44-786
■ Easy to install — no tools required
Description
Large Breaker Lockout
Qty.
Cat. No.
1
44-823
Oversized Circuit Breaker Lockout System
To comply with:
“The provisions for locking or adding a lock to the disconnecting
means shall be permanently installed on or at the switch or circuit
breaker used as the disconnecting means.”
Article 430.102(B) Motor 2002 NEC.
■ Unique Lockout system for oversized 480/600V Circuit
Breakers
■ System can be permanently installed into an electrical panel
putting all lockout items at the point of need
■ Easy installation of adhesive mounting rails – no tools required
■ Pegs in mounting rails mate with holes in locking arms for
security of arm when lock is in place
■ Red arms lock off, green arms lock on
Description
Oversized Circuit Breaker System –
480-600 Volt
D-26
www.idealindustries.com
Qty.
Cat. No.
1
44-822
1-800-435-0705 for Customer Service
Wire Management
Breaker
Number
of Poles
IDEAL
Lockout
Device
BR
1
Challenger
BR
BR
Type C
2
3
1
Cutler Hammer
Type C
CH
2
1
CHB
1
CH
CHB
TYPE-NA
TYPE-NB
TYPE-NB
TYPE-NA
TYPE-NASW
TYPE-NE
TYPE-NEF
TYPE-NEJ
TYPE-NEJH
TYPE-HEJ
TOGGLE
BG
BA
TE
TEB
TED
THED
TEF
TEY
TFJ
TQL-A
2, 3
2, 3
1
2
3
3
1
1
3
3
3
3
1
1
1
2, 3
1, 2, 3
1, 2, 3
1, 2, 3
2, 3
1, 2, 3
2, 3
1
TQB-A
1
TQC-A
1
44-810
44-809
44-783
44-783
44-810
44-809
44-783
44-810
44-809
44-810
44-809
44-783
44-783
44-809
44-783
44-807
44-807
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-807
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-783
44-783
44-783
44-783
44-783
44-783
44-783
44-783
44-783
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-807
44-807
44-807
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-807
44-807
44-807
Bryant
Federal Electric Products
Federal Pacific
Frank Adams Electric Co.
General Electric
Heinemann
Electric Co.
ITE
THQL-A
1
THQB-A
1
THQC-A
1
THHQL-A
1
THHQB-A
1
THHQC-A
1
TQL
TQB
TQC
THQL
THQB
THQC
THHQl
THHQB
THHQc
TQl-s
TQB-s
TQc-s
THQL-s
THQB-s
THQc-s
THhQl-s
THhQb-s
THhQc-s
TFJ
THFJ
TJD
SMG4
AMIZ
KU
KL
BQCH
EE
EH
ET
ET-JJ
ET-JJ
FJ2-B
2, 3
2, 3
2, 3
2, 3
2, 3
2, 3
2, 3
2, 3
2, 3
1
1
1
1
1
1
1
1
1
2, 3
2, 3
3
1
1
1
1
1, 2, 3
1, 2, 3
1, 2, 3
1, 2, 3
3
3
2, 3
1-800-435-0705 for Customer Service
Cleat
Req’d
IDEAL
Cleat
No.
No
No
No
No
No
No
No
No
No
No
No
No
No
Manufacturer
Model
Breaker
Number
of Poles
IDEAL
Lockout
Device
ITE
QJ3B
QJ22B
QJ23B
QJH22B
QJH23B
QJ2-H
QP
2, 3
2, 3
2, 3
2, 3
2, 3
2, 3
1
QPH
1
HQP
1
44-809
44-809
44-809
44-809
44-809
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-807
44-807
44-807
44-807
44-807
44-810
44-810
44-809
44-809
44-809
44-809
44-809
44-809
44-783
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-783
44-783
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-809
44-807
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-809
44-807
44-807
44-807
44-807
44-807
44-810
44-809
44-810
44-809
44-810
44-809
44-810
44-809
44-809
Square D
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
No
Yes
Yes
Yes
Yes
Yes
Yes
44-785
44-785
44-785
44-785
44-785
44-785
Sylvania & Challenger
Westinghouse
44-786
44-785
44-785
44-785
44-786
44-786
44-786
Zinsco Electric Products
BQ
1
BQH
1
HBQ
1
LA
LAL
MA
MH
ML-1
QO
QOB
QO
QOB
Q2L
Q2MT
Q1B
TYPE-C
TYPE-C
BA
2, 3
2, 3
2, 3
2, 3
3
1
1
2, 3
2, 3
2, 3
2, 3
2, 3
1
3
1
BAB
1
QBHW
1
HBAX
1
HBAW
1
BR
1
BR
BRH
EB
EHB
FB
EH
FA
MCPO
EHD
FDB
FD
HFD
FDC
GB
GBH
GR
HQP
2, 3
2, 3
1, 2, 3
1, 2, 3
2, 3
1, 2, 3
3
3
1, 2, 3
2, 3, 4
1, 2, 3, 4
1, 2, 3, 4
2, 3, 4
1, 2, 3
1, 2, 3
3
1
QPHW
1
QHPX
1
QHPW
1
HQNP
KA
LA
MA
MC
MCC
QC
3
3
3
2, 3
2, 3
2, 3
1
QCHW
1
QHCX
1
QHCW
1
Q & QB
1
Cleat
Req’d
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
No
No
No
No
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
No
Yes
Yes
Yes
Yes
Yes
No
No
No
No
No
No
No
No
No
www.idealindustries.com
IDEAL
Cleat
No.
44-785
44-785
44-785
44-785
44-785
44-785
44-786
44-786
44-786
44-786
44-786
44-785
44-785
44-785
44-785
44-785
44-785
44-785
44-785
44-786
44-786
44-786
44-786
44-786
D-27
Lockout/Tagout
Model
Manufacturer
Miniature Circuit Breaker Lockouts for European-Style Breakers
■ Easy to install push button action – requires no tools
■ Lightweight Xenoy locks are required
■ See user guide below for the style that fits your application
Lockout/Tagout
Pins Out – #44-779
Pins In – #44-780
Pins Out Wide – #44-784
Tie Bar – #44-787
Manufacturer
Model
Breaker Number
of Poles
IDEAL
Lockout Device
Manufacturer
Model
Breaker Number
of Poles
IDEAL
Lockout Device
ABB
F374
S222
1
1
44-779
44-779
Legrand
06469
01980
3
4
44-780
44-787
S251, S261, S263
S272, S253
S253
1
1
3
44-779
44-779
44-779
Lemag
SD62
1
44-809
Merlin Gerin
E82S
2
44-780
1492-C1, 2, 3
1, 2, 3
44-779
S46
1
44-779
Clipsal
4CB116
4CB320
1
3
44-779
44-779
C32N
C60N
C60N
C32N
C45AD
C80A
C60N
1
1
2
3
3
3
4
44-779
44-779
44-779
44-779
44-779
44-784 or 44-787
44-779
Merlin Gerin +B83
B100A
2
44-784 or 44-787
E-T-A
911225
911220G
1
2
44-780
44-779
C16
C16
1
4
44-779
44-779
C16
C6
BSEN60947-3
C6
AC22 BS5419
1
1
2
3
2
44-779
44-779
44-783
44-779
44-783
GE Vynckier
Series G
Series E
Series G
Series E
1
3
3
4
44-780
44-780
44-780
44-780
Siemans 17U
5SQ11
5SQ12
5SQ13
5SQ16
1
2
3
4
44-784
44-787
44-787
44-787
GE Vynckier 16A
Series E
2
44-780
Siemans B32
GE Vynckier C16, 16A
Series E
1
44-780
Hager
MW216A
453717
MW620A
2
3
4
44-779
44-779
44-779
Kapp
LS68
1
44-780
Legrand
01908
01935
04302
01980
1
2
2
3
44-779
44-787
44-780
44-787
AEG
Allen-Bradley
Buschmat
FAZ
D-28
www.idealindustries.com
Proteus
5SX21
1
44-784
Siemans BIG Single Throw 3VF3
3
44-809
Siemans C10
5SX1
1
44-784
Siemans C32
5SX1-2
2
44-787
Siemans C70
5SX13
3
44-787
Siemans L20A
5SN2-2
2
44-787
EA53
3
44-780
WRS40/2
2
44-779
Sursum
Wylex
1-800-435-0705 for Customer Service
Universal Ball Valve Lockout
Gate Valve Lockouts
■ Designed to lock out quarter turn
valves of varying sizes and geometries
■ Durable plastic resists chemicals
and extreme temperatures to 240°F
■ Accommodates handle sizes to 1-1/14 in. thick x 1-5/8 in. wide
■ Stainless steel hinge for added strength and security
■ Locks valves in on, off or throttled position
■ Unique knockout feature accommodates OS&Y or rising stem
gate valves
■ Nylon and stainless steel construction
■ Accepts locks with up to 3/8 in.
■ Additional arms necessary to lock in throttled position
and to lock out 3-, 4- and 5-way valves
Valve Size
Qty./Pkg.
Cat. No.
Description
Cat. No.
1 in. to 2-1/2 in.
1
44-824
Small Universal Ball Valve Lockout w/ 1 in. x 3/4 in. handle
44-770
2-1/2 in. to 5 in.
1
44-825
Large Universal Ball Valve Lockout w/ 1-5/8 in. x 1-1/4 in. handle
44-771
5 in. to 6-1/2 in.
1
44-826
6-1/2 in. to 10 in.
1
44-827
10 in. to 13 in.
1
44-828
Pneumatic Lockout
Ball Valve Lockout Devices
■ Best available method for locking
out ball valves
■ Isolates equipment from
compressed air
■ Patented design fits most major brand ball valves
■ Fits C, D and E couplers
■ Designed to lock in off position only
■ Accommodates most 1/4 in., 3/8 in. and 1/2 in. fittings
■ Complies with OSHA lockout standard
Valve Size (In.)
1/2 to 1-1/4
1-1/4 to 3
■ Accepts 1/4 in. or 9/32 in. padlock shackles
■ Durable plastic construction
Max.
Shackle Length
Material
Cat. No.
—
Polypropylene
44-846
—
Polypropylene
44-847
1/4 to 1 (not shown)
9/32
Nylon
44-820
1-1/4 to 3 (not shown)
9/32
Heavy steel
44-821
1-800-435-0705 for Customer Service
Description
Cat. No.
Pneumatic Lockout
44-774
www.idealindustries.com
D-29
Lockout/Tagout
Wire Management
Cable Lockout System
Wall Switch Lockout
■ Fits standard wallmounted single or
three-way
electrical switches
■ Locks switch in either
on or off position
■ Installs quickly using
existing plate screws
Lockout/Tagout
Description
■ Heavy-duty plastic lockout unit firmly
secures cable
Wall Switch Lockout
Description
Cat. No.
Cable Lockout System (not shown)
44-781
Cable Lockout
44-829
■ Cannot be removed
without key
■ Works on any 2- or 3prong plug
■ Durable plastic
body resists wear,
chemicals and jobsite abuse
■ Accommodates
cable ties or
padlocks (with up
to 3/8 in. shackles)
Description
Size
Cat. No.
2 in. x 2 in. x 3-1/2 in.
44-818
3-1/4 in. x 3-1/4 in. x 7 in.
44-819
Fuse Lockout Devices
Description
Cat. No.
Electric Plug Lockout
44-782
Electric Plug Lockout (keyed alike – key 8002)
44-8002
Fuse Blockout Devices
■ Fuse lockout
snaps easily into
place and can be
cable tied for
added security
■ Highly visible fuse
blockouts snap
into blade-type
fuse blocks to
prevent
installation of
fuses
■ Fit most Buss and
Gould fuse blocks
■ Fit most Buss and
Gould fuse blocks
Description
13/32 in. Fuse Lockout
D-30
44-789
■ Slides over cord
prongs and locks in
place to prevent cord
from being plugged
into an outlet
■ Accommodate a
variety of electrical
plug and cord
sizes to prevent
accidental
connection or
disconnection
Plug Lockouts – 220/550V
Cat. No.
1
Electric Plug Lockout
Plug Lockouts
Plug Lockouts – 110V
Qty./Card
www.idealindustries.com
Qty./Card
Cat. No.
Description
Qty./Card
Cat. No.
3
44-813
1/4, 9/32 and 9/16 in. Fuse Blockout
3
44-815
13/16 in., 1-1/6 in. and Blade Fuse Blockout
3
44-816
1-800-435-0705 for Customer Service
Wire Management
Aluminum Safety Lockout Padlocks
Xenoy Safety
Lockout Padlocks
■ Dedicated safety
lockout device reduces
confusion with other
locks
■ Non-conductive, lightweight Xenoy® body
■ 1-1/2 in. wide lock with 1/4 in. shackle
■ High visibility, baked-on powder coated finish stays bright
■ Four colors for easy identification
■ Ideal for corrosive and tough environments
■ Keyed alike and Master-Keyed locks available by special order
■ Rekeyable bodies for easy key system maintenance
Bumper Color
Cat. No.
■ Hardened shackles for superior resistance to cutting
Blue
44-912
Black
44-914
Red
44-916
Yellow
44-918
Bumper Color
Cat. No.
Blue
44-920
Black
44-921
Red
44-922
Yellow
44-923
Lock Labels
Steel Padlocks
■ Rustproofed, steel case with nickel-plated
shackle withstands abuse and
environmental hazards
■ Includes two keys
■ 1-1/2 in. wide lock with 9/32 in.
shackle diameter
■ Easy identification of employees’ locks
■ Keyed-alike and Master-Keyed
locks available by special order
■ Polyester over laminate protects label
■ Write-on, vinyl labels with peel-off adhesive backing
3/4 In. Shackle Clearance
Cat. No.
2 In. Shackle Clearance
Cat. No.
Blue
44-900
44-901
Black
44-902
44-903
White
44-904
44-905
Red
44-906
44-907
Green
44-908
44-909
Yellow
44-910
44-911
Bumper Color
Description
Cat. No.
Lock Labels
44-898
Marking Pens
■ Fast-drying, permanent ink
will not smear
■ Use on write-on marker cards
and write-on cable-tie
marker plates
■ Color-coded in
red or black
1-800-435-0705 for Customer Service
Description
Cat. No.
Marking Pen w/black ink
41-697
Marking Pen w/red ink
41-698
www.idealindustries.com
D-31
Lockout/Tagout
■ 1-1/2 in. shackle clearance
Heavy-Duty Lockout Tags
Bilingual Lockouts and Tags
Lockout/Tagout
■ Spanish/English tags provide extra safety and information
in bilingual situations
■ High-visibility lettering
■ High-visibility lettering
■ Laminated plastic tags with non-fade legends resist corrosive
and harsh environmental conditions
■ Laminated plastic tags have non-fade legends, resist corrosive
and harsh environmental conditions and a 7/8 in. grommet
■ Write-on tag with 7/8 in. grommet can be padlocked to device
to help prevent unauthorized removal
■ Vinyl tags are silk screened with a metal grommet; red tie
fastener included
Legend
Qty./Card
Cat. No.
■ Exceeds OSHA’s 50-lb. pullout requirement
Do Not Operate
5
44-840
Do Not Operate (striped)
5
44-841
Legend
Type
Qty.
Cat.No.
Do Not Operate
Heavy-Duty Laminated
Card of 5
44-830
Do Not Operate
Heavy-Duty Laminated Box of 100
44-1830
Do Not Operate
Economy Vinyl
Bag of 25
44-848
Do Not Operate –
Maintenance Department
Heavy-Duty Laminated
Card of 5
44-831
Do Not Operate –
Maintenance Department
Economy Vinyl
Bag of 25
44-844
Do Not Operate –
Electricians at Work
Heavy-Duty Laminated
Card of 5
44-832
Do Not Operate –
Electricians at Work
Economy Vinyl
Bag of 25
44-843
Do Not Operate –
(red striped background)
Heavy-Duty Laminated
Card of 5
44-833
Do Not Operate –
(red striped background)
Heavy-Duty Laminated Box of 100
44-1833
Do Not Operate
(red striped background)
Economy Vinyl
Bag of 25
44-849
Do Not Operate –
Lockout Steps Required
Heavy-Duty Laminated
Card of 5
44-835
Do Not Operate
(Photo ID - Self Sealant)
Heavy-Duty Laminated
Card of 5
44-834
■ Rustproofed, plated and vinyl-coated
■ Labeled hasps feature anodized aluminum alloy construction
for long-term durability
Safety Lockout Hasps
■ Helps ensure maximum security for
complex work team situations
Jaw Diameter
■ Allows up to 13 individuals to
personally lock the closed box
■ Heavy-duty steel construction resists
unauthorized entry and job-site abuse
Qty./Card
Cat. No.
1 in.
3
44-800
1-1/2 in.
2
44-801
Labeled Safety Lockout Hasps
■ Compact 8-3/4 in. x 3-1/2 in. x 6 in. design
Description
Cat. No.
Group Lock Box
44-804
www.idealindustries.com
■ Allow up to six workers to lock out a single energy source
■ Permanent “Do Not Operate” labels accept pens, pencils
and permanent markers
Group Lock Box
D-32
Safety Lockout Hasps
Legend
Color
Qty./Card
Cat. No.
Do Not Operate
Blue
1
44-790
Do Not Operate
Red
1
44-791
1-800-435-0705 for Customer Service
Wire Management
Lockout Signs
■ Resistant to both chemicals and abrasion — protected graphics for indoor and outdoor use
Magnetic Danger Signs
Legend
Material
Size (In.)
Cat. No.
Danger Breakers Locked Out –
Magnetic
5x7
44-890
Danger Equipment Being Serviced
Do Not Operate
Magnetic
5x7
44-891
Lock Out Before Servicing
Self-sticking
polyester
2-1/4 x 4-1/2
44-884
Notice in Accordance with
OSHA
Fiberglass
20 x 14
44-887
Legend
Material
Size (In.)
Cat. No.
OSHA Regulation
Self-sticking
polyester
3-1/2 x 10
44-877
OSHA Regulation – Bilingual
Self-sticking
polyester
7 x 10
44-878
Acrylic
6H x 9W x 4D
44-885
Lockout Safety Center
Safety Signs
■ Resistant to both chemicals &
abrasion — protected graphics
for indoor & outdoor use
Legend
Material
Size (In.)
Cat. No.
Danger – High Voltage
Fiberglass
10 x 14
44-862
Danger – High Voltage
Self-Sticking Polyester
7 x 10
44-863
Danger – High Voltage – Keep Out
Fiberglass
10 x 14
44-880
Danger – High Voltage – Keep Out
Self-Sticking Polyester
7 x 10
44-881
Danger – _____ Volts
Fiberglass
10 x 14
44-860
Danger – _____ Volts
Electrical and Other Danger Signs
Self-Sticking Polyester
7 x 10
44-861
Danger – Electrical Equipment – Authorized Personnel Only
Fiberglass
10 x 14
44-868
Danger – Electrical Equipment – Authorized Personnel Only
Self-Sticking Polyester
7 x 10
44-869
Danger – Electrical Hazard – Authorized Personnel Only
Fiberglass
10 x 14
44-872
Danger – Electrical Hazard – Authorized Personnel Only
Self-Sticking Polyester
7 x 10
44-873
Keep Out
Fiberglass
10 x 14
44-888
Keep Out
Self-Sticking Polyester
7 x 10
44-889
Fiberglass
10 x 14
44-876
Do Not Enter
Do Not Enter
Self-Sticking Polyester
7 x 10
44-879
Danger High Voltage – Spanish
Self-Sticking Polyester
7 x 10
44-865
Danger High Voltage – Bilingual
Fiberglass
20 x 14
44-882
Legend
Material
Size (In.)
Qty./Pkg.
Cat. No.
Hearing Protection Required
Fiberglass
10 x 14
1
44-852
Hearing Protection Required
Self-Sticking Polyester
7 x 10
1
44-853
Hard Hats Required
Fiberglass
10 x 14
1
44-856
Hard Hats Required
PPE Caution Labels and Signs
Self-Sticking Polyester
7 x 10
1
44-857
Eye Protection Required
Fiberglass
10 x 14
1
44-850
Eye Protection Required
Self-Sticking Polyester
7 x 10
1
44-851
1-800-435-0705 for Customer Service
www.idealindustries.com
D-33
Lockout/Tagout
OSHA Regulation Signs
Pro-Series® Locks
Python™ Adjustble Locking Cable
Pro-Series® Shackless Lock and Hasp
Python™ Adjustable Locking
Cable secures anything
within its grasp. It’s the
only locking cable
that is always the right
length for your application.
This exclusive, patented
product holds the flexible
steel cable tight at any position for
infinite possibilities.
■ Ideal for vans, trucks,
gates and vending
■ Defeats attempts to pry
and cut
■ Hardened solid steel
lock body withstands
forcible attacks
■ Infinite Locking Positions – The patented lock holds the cable
tight at any position from 1 ft. (30cm) to 6 ft. (1.8m)
■ Application Flexibility – Interchangeable cables
■ Complete with high
security 6-pin Pro Series®
Cylinder
Description
Cat. No.
■ Keyed Alike Convenience – Rekeyable cylinder
Hidden Shackle Solid Steel Padlock
44-994
■ Cut Resistance – 3/8 in. (10mm), 100% steel braided cable
Solid Steel Hasp for use with 44-994
44-993
■ Weather Tough – Rust resistant aluminum lock body
■ Scratch Resistant – Vinyl cable sleeve and lock body bumper
Other Applications: Bikes, lawn furniture, lawn mowers, job sites,
canoes, boats, skis, snowboards, generators, pickup truck cargo,
spare tire locks and much more.
Description
Cat. No.
Master Lock Python Kit with 6 ft. Cable-keyed different
44-990
Master Lock Python Kit with 6 ft. Cable-keyed alike
44-991
12 ft. (3.7m) x 3/8 in. (10mm) Cable for Python Lock
44-992
D-34
www.idealindustries.com
1-800-435-0705 for Customer Service
Test & Measurement
E
Multimeter Selection Guide
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
D
A
A
•
D
D
•
•
•
D
•
•
A
D
•
•
A
•
•
61-635
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
61-633
•
•
•
•
61-614
•
•
•
•
61-610
•
•
•
•
630 Series
61-609
61-494
•
•
•
•
610
61-603
61-482
•
•
•
•
61-602
61-481
•
•
•
•
•
•
61-601
61-361
•
600 Series
61-495
61-360
490 Series
61-324
Selection Guide
MEASUREMENT FUNCTIONS
AC & DC Voltage
AC Current
DC Current
Resistance
LV Resistance
Audible Continuity
Diode Test
Capacitance
Frequency
Temperature
Duty Factor
Battery Test
Decibels
Phase Rotation
FEATURES
Display Type (Digital or Analog)
True RMS
Auto/Manual Ranging
Data Hold /Auto Hold
Max Hold
Peak Hold
Min/Max
Min/Max/Avg
Peak Min/Max
Relative Mode
High/Low Limits
High Speed Analog Bar Graph
Auto Power Off
Backlight
Low Battery Indication
Dual Display
Triple Display
Overload Protection on All Ranges
Data Logging
Data Acquisition
Memory Storage & Recall
Optical RS-232 Interface
Optional ProVision™ Software*
Warranty (yrs)**
CERTIFICATIONS
UL 3111-1 Listed
cUL or CSA
CAT III Rating
CE
480 Series
61-322
MULTIMETER SELECTION GUIDE
360 Series
61-320
320 Series
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
D
•
•
A
D
•
•
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
D
•
D
D
•
•
D
D
•
•
D
•
•
•
D
D
•
D
•
D
•
•
A
D
•
•
A
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
L
L
•
•
L
•
•
•
•
•
•
•
•
•
•
•
•
D
D
•
D
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
L
L
L
L
•
•
•
•
•
•
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
D
*
L
•
•
•
•
•
•
•
•
•
L
L
L
L
5
5
•
L
*
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
*Software and Optical RS-232 Interface come standard with this model
** L = Lifetime Limited Warranty
E-2
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
®
Contractor-Grade Multimeters
Features
■ Capacitance
61-324
■ Frequency
True RMS, backlight
data acquisition and
RS-232 interface
■ Auto/manual ranging
320 Series
■ Min/max
Data acquisition and analysis with
320 ProVision™ software for 324.
See page E-35 for information.
■ Data hold
■ Auto power off
61-322
True RMS
61-320
Accessories
Includes
Premium Test Leads w/Alligator Clips
TL-100
Optional
Carrying Case
C-290
Current Clamp Adapter
61-334
ProVision™ Software
61-904
RS-232 Cable
61-905
320 Series Specifications
61-324
61-320
RANGE & RESOLUTION
61-322
61-324
BASIC ACCURACY
AC VOLTAGE
600.0m/6.000/60.00/600.0/750 V
0.9%
0.9%
DC VOLTAGE
600.0m/6.000/60.00/600.0/1000 V
0.5%
0.5%
0.5%
AC CURRENT
60.00m/600.0m A
—
1.5%
1.5%
DC CURRENT
600.0µ/6000µ/60.00m/600.0m A
1.0% (µA range only)
1.0%
1.0%
RESISTANCE
600.0/6.000k/60.00k/600.0k
6.000M/60.00M Ω
0.7%
0.7%
0.7%
CAPACITANCE
FREQUENCY
0.9%
60.00µ/600.0µ/6.000m F
1.9%
1.9%
1.9%
6000/60.00k/600.0k/6.000M/60.00M Hz
0.01%
0.01%
0.01%
1-800-435-0705 for Customer Service
www.idealindustries.com
E-3
®
Commercial-Grade Multimeters
Features
■ True RMS
480 Series
■ Capacitance
61-482
■ Frequency
Temperature, min/max,
peak min/max, relative
mode, backlight, includes
thermocouple
■ Auto/manual ranging
■ Analog bar graph
■ Data hold
■ Auto power off
■ Low battery indication
■ Accessories
61-481
Accessories
Includes
Carrying Case
C-290
Premium Test Leads with Alligator Clips
TL-100
Optional
Current Clamp Adapter
61-334
480 Series Specifications
61-481
RANGE & RESOLUTION
61-482
BASIC ACCURACY
AC VOLTAGE
400.0m/4.000/40.00/400.0/750 V
1.3%
1.3%
DC VOLTAGE
400.0m/4.000/40.00/400.0/1000 V
0.25%
0.25%
AC CURRENT
40.00m/400.0m/10 A
2.0%
2.0%
DC CURRENT
40.00m/400.0m/10 A
0.6%
0.6%
RESISTANCE
400.0/4.000k/40.00k/400.0k./4.000M/40.00M Ω
0.4%
0.4%
CAPACITANCE
4.000n/40.00n/400.0n/4.000µ/40.00µ/
400.0µ/4.000m/40.00m F
2.0%
2.0%
4.000k/40.00k/400.0k/4.000M/40.00M Hz
0.01%
0.01%
-4° F to 1472° F (-20°C to 800°C)
---
2.0%
FREQUENCY
TEMPERATURE
E-4
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
®
Industrial-Grade Multimeters
61-495
Features
Data logging (40,000
records), thermocouple,
software and cable
interface included
■ True RMS
■ Data acquisition
490 Series
■ Data logging
■ Data storage
■ Frequency
■ Capacitance
■ Temperature
■ Lo voltage Ω
■ Duty factor
Data acquisition and analysis
with 490 ProVision™ software.
See page E-35 for information.
■ dBm/dB
■ Auto/manual ranging
■ Dual display
61-494
■ Analog bar graph
Data logging
(6,000 records)
■ Auto power off
■ Peak hold
■ Min/max/avg
■ Relative mode
Accessories
■ 20,000 count high
Includes
accuracy mode
■ Backlight
■ Low battery indication
Carrying Case
C-290
Premium Test Leads with Alligator Clips
TL-100
Optional
Current Clamp Adapter
61-333
ProVision™ Software*
61-900
RS-232 Cable*
61-902
*Included with 61-495
490 Series Specifications
61-494
RANGE & RESOLUTION
AC VOLTAGE
20.000m/200.00m/2.0000/20.000/200.00/750.0 V
0.7%
0.7%
DC VOLTAGE
20.000m/200.00m/2.0000/20.000/200.00/1000.0 V
0.06%
0.06%
AC CURRENT
20.000m/200.00m/2.0000/10.000 A
0.1%
0.1%
DC CURRENT
20.000m/200.00m/2.0000/10.000 A
0.3%
0.2%
RESISTANCE
200.00/2.0000k/20.000k/200.00k/
2.0000M/20.000M/200.00M/2.0000G Ω
0.6%
0.6%
2.0000k/20.000k/200.00k/
2.0000M/20.000M/200.00M Ω
0.3%
0.3%
4.000n/40.00n/400.0n/4.000µ/ 40.00µ/
400.0µ/4.000m/40.00mF
0.9%
0.9%
LV RESISTANCE
CAPACITANCE
FREQUENCY
1-800-435-0705 for Customer Service
61-495
BASIC ACCURACY
20.000/200.00/2.0000k/20.000k/200.00k/1.0000M Hz
0.01%
0.01%
DUTY FACTOR
20% - 80%
1.0%
1.0%
TEMPERATURE
-150° F to 2200° F (-100° C TO 1200° C)
0.1%
0.1%
www.idealindustries.com
E-5
®
Technical-Grade Multimeters
Features
61-635
Extended
accuracies, software
and interface
cable included,
temperature,
thermocouple
included
■ Data acquisition
■ Optical RS-232 interface
■ True RMS
630 Series
■ Auto/manual ranging
■ Analog bar graph
■ Peak hold (0.5ms)
■ Capacitance
■ Frequency
■ Duty factor
■ Auto calibration
■ Auto hold/peak hold
■ Memory store and recall
Data acquisition and analysis
with 630 ProVision™ software.
See page E-35 for information.
■ Lead input warning
■ High/low limits
■ Max/min/max-min
61-633
■ Relative mode
Accessories
■ Backlight
Includes
■ Auto power off
Carrying Case
C-290
■ Triple display
Premium Test Leads with Alligator Clips
TL-100
Optional
■ Low battery indication
Current Clamp Adapter
61-333
ProVision™ Software*
61-901
RS-232 Cable*
61-902
*Included with 61-635
630 Series Specifications
61-633
RANGE & RESOLUTION
AC VOLTAGE
400.00m/4.0000/40.000/400.00/750.0 V
1.0%
0.7%
DC VOLTAGE
40.000m/400.00m/4.0000/40.000/400.00/1000.0 V
0.02%
0.06%
AC CURRENT
DC CURRENT
40.000m/400.00m/4.0000/10.000 A
40.000m/400.00m/4.0000/10.000 A
1.2%
0.5%
0.8%
0.2%
RESISTANCE
400.00/4.0000k/40.000k/
400.00k/ 4.0000M/40.000M Ω
4.0000k/40.000k/400.00k/
4.0000M/40.000M Ω
0.5%
0.3%
1.0%
0.6%
LV RESISTANCE
4.0000n/40.000n/400.00n/4.0000µ/
40.000µ/400.00µ/4.0000m/40.000m F
1.9%
0.9%
400.00/4.0000k/40.000k/400.00k/4.0000M Hz
0.01%
0.01%
DUTY FACTOR
20% - 80%
1.0%
1.0%
TEMPERATURE
-150° F to 2200° F (-100° C TO 1200° C)
—
2.0%
CAPACITANCE
FREQUENCY
E-6
www.idealindustries.com
61-635
BASIC ACCURACY
1-800-435-0705 for Customer Service
Test and Measurement
Test-Pro®
Contractor-Grade Multimeters
Features
■ Auto power off
■ Low battery indication
61-361
360 Series
True RMS,
phase rotation,
capacitance,
frequency
Accessories
61-360
Includes
Standard Test Leads
TL-58
Max hold,
data hold
Optional
Carrying Case
C-290
Current Clamp Adapter
61-334
360 Series Specifications
61-360
RANGE & RESOLUTION
61-361
BASIC ACCURACY
AC VOLTAGE
200.0m/2000m/20.00/200.0/600 V
1.0%
2.0%
DC VOLTAGE
200.0m/2000m/20.00/200.0/600 V
0.5%
1.2%
AC CURRENT
DC CURRENT
2.000 A
2.000 A
1.5%
1.0%
3.0%
2.5%
RESISTANCE
200.0/2.000k/20.00k/200.0k/20.00M/200.0M Ω
1.0%
1.0%
CAPACITANCE
20.00µ/200.0µ/2.000m/20.00m F
—
4.0%
10.0-100.0k Hz
—
0.50%
—
80-500V
(50-500HZ)
FREQUENCY
PHASE
ROTATION
1-800-435-0705 for Customer Service
www.idealindustries.com
E-7
600 Series Pocket Meters
Features
■ Low cost, multi-function
61-602
■ Convenient pocket size
■ Overload protection on
all ranges
600 Series
61-601
(Booklet Style Case)
Built-in test leads, audible
continuity, auto power off,
low battery indication
61-603
(Built-in test stand)
Battery test, low
battery indication
61-609
(Built-in test stand)
Auto/manual ranging,
auto power off
600 Series Specifications
61-601
61-602
61-603
61-609
RANGE &
RESOLUTION
ACCURACY
RANGE &
RESOLUTION
ACCURACY
RANGE &
RESOLUTION
ACCURACY
RANGE &
RESOLUTION
ACCURACY
AC VOLTAGE
3.200/32.00/
320.0/450 V
4.0%
200.0/600 V
2.5%
200.0/500 V
1.0%
400.0m/4.000/40.00/
400.0/750 V
1.3%
DC VOLTAGE
320.0m/3.200/
32.00/320.0/450 V
2.0%
200.0m/2.000/
20.00/200.0/600 V
2.0%
2.000/20.00/
200.0/1000 V
0.5%
400.0m/4.000/40.00/
400.0/1000 V
1.0%
AC CURRENT
—
—
—
40.00m/400.0m/10 A
1.5%
—
2.000m/20.00m/
200.0m A
1.0%
2.000m/20.00m/
200.0m/10.00 A
40.00m/400.0m/10 A
1.5%
200.0/2.000k/20.00k/
200.0k/2.000M Ω
DC CURRENT
RESISTANCE
BATTERY TEST
E-8
320.0/3.200k/320.0k/
3.200M/32.00M Ω
—
www.idealindustries.com
2.0%
200.0/2.000k/20.00k/
200.0k/2.000M/20.00M Ω
—
1.5V, 9.0VDC
1.0%
0.8%
400.0/4.000/40.00/400.0k/
4.000/40.00M Ω
1.0%
0.8%
—
1-800-435-0705 for Customer Service
Test and Measurement
Analog Multimeters
Features
■ Multi-color analog display with
610 Series
mirrored scale
■ High-impact thermoplastic case
■ Decibel measurement
■ 5-year warranty
61-614
Audible continuity,
battery test,
built-in stand
61-610
Pocket size,
diode protected
610 Series Specifications
61-610
61-614
RANGE & RESOLUTION
ACCURACY
RANGE & RESOLUTION
ACCURACY
AC VOLTAGE
10/50/250/500 V
+/- 4.0% Full Scale
10/50/250/1000 V
+/- 4.0% Full Scale
DC VOLTAGE
DC CURRENT
10/50/250/500 V
500µ/50m/250m A
1 M Ω Full Scale
5 k Ω Mid Scale
+/- 3.0% Full Scale
+/- 3.0% Full Scale
2.5/10/50/250/1000 V
5m/50m/500m/20 A
10k/100k/10M Ω Full Scale
50/500/50k Ω Mid Scale
+/- 3.0% Full Scale
+/- 3.0% Full Scale
RESISTANCE
DECIBELS
BATTERY TEST
+/- 3.0% Arc Length
-20 to +56 dB
-8 to +62 dB
—
1.5 , 9.0 VDC
1-800-435-0705 for Customer Service
+/- 3.0% Arc Length
www.idealindustries.com
E-9
Current Clamp Adapters
Flexible Clamp
Adapter
Multimeter Accessories
Current Clamp Adapters
Cat. No.
200AAC Current Clamp Adapter
300AAC Current Clamp Adapter
500AAC Current Clamp Adapter
600A AC/DC Current Clamp Adapter
1000AAC Current Clamp Adapter
1000AAC Flexible Current Clamp Adapter
300/3000AAC Flexible Current Clamp Adapter
61-332
61-451
61-333
61-334
61-436
61-330
61-331
Current Clamp
Adapter
See page E-34 for more information
Test Lead Kits
E-10
TL-435
TL-436
Industrial Test Lead Kit
Electrical Test Lead Kit
Kit contains: 1.5m silicone lead set, probes
w/SS tips, rigid alligator clips, flex pincer
clips, insulated alligator clips, insulated spade
lugs and padded zipper pouch, 1000V, 10A
rating
Kit contains: 1.5m silicone lead set,
probes w/SS tips, insulated alligator
clips and tri-fold pouch, 1000V, 10A
rating
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
Clamp Meter Selection Guide
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Selection Guide
•
•
•
•
•
•
61-762
•
•
•
•
•
•
•
•
•
•
61-760
•
•
•
•
•
•
•
•
760
61-742
•
•
•
61-741
•
•
•
61-740
•
•
•
•
•
•
•
•
61-734
•
•
•
•
•
•
•
740 Series
61-726
•
•
•
•
•
•
61-724
•
•
•
61-722
•
•
•
61-720
61-704
•
•
•
720 Series
61-711
61-702
•
710
61-710
61-701
CLAMP METER SELECTION GUIDE
MEASUREMENT FUNCTIONS
AC Voltage
DC Voltage
AC Current
DC Current
Resistance
Audible Continuity
Diode Test
Capacitance
Frequency
Temperature
Leakage Current
FEATURES
Display Type (Analog or Digital)
AC Current Capacity
DC Current Capacity
True RMS
Auto/Manual Ranging
Data Hold
Max Hold
Peak Hold
Min/Max
DCA Zero
Pointer Lock
High Speed Analog Bar Graph
Auto Power Off
Non-Contact Voltage Indication
Harmonics Indicator
Vibration Mode
Analog Output
Backlight
Low Battery Indication
High Voltage Warning
Overload Protection
Inches
Conductor Size - (mm)
Warranty*
CERTIFICATIONS
UL 3111-1 Listed
cUL or CSA
CAT III Rating
CE
61-452
700 Series
•
•
D
60
•
•
•
•
D D D
A A
D
D
D D
200 200 200 600 300 1000 1000 1000 1000
1200 1200
•
• • •
•
• • •
• • • •
• • •
• •
•
•
•
• •
• •
•
• • •
• • • •
• • •
• •
• •
•
• •
• •
•
• •
1.18" 1.3" 1.3"
(30) (33) (33)
L
L
L
•
•
•
•
•
•
•
•
•
•
•
•
D
D D
D
D D
400 2000 2000 2000 600 600
2000 2000
•
•
• • •
• • • • •
•
•
•
•
•
•
•
•
• • • • • • •
•
•
• • • • • • • •
1.3” 1.18" 1.3" 1.8" 1.8" 1.8" 1.8" 1.18" 2.16" 2.16"
(35) (30) (33) (46) (46) (46) (46) (30) (55) (55)
L
5
5
L
L
L L
L
L
L
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
2.16"
(55)
L
•
•
• •
1.3” 1.3”
(33) (33)
L
L
•
•
•
•
•
•
*L=Lifetime Limited Warranty
1-800-435-0705 for Customer Service
www.idealindustries.com
E-11
4-in-1 Test Tool
Features
■
61-704
200AAC current capability
True RMS,
backlight,
vibration mode to
verify AC voltage,
harmonics
indicator,
max hold,
CAT III 1000V
■ Non-contact voltage
(40-600VAC)
■ Capacitance
■ Low battery indication
700 Series
■ Overload protection on
■
■
■
■
■
all ranges
Integral lead storage
Audible dangerous voltage
warning on all ranges
Auto power off
Ergonomic hourglass shape
Compact clamp head
200 Amp
Clamp/Multimeter
Use it for testing a variety of
electrical parameters on
branch circuits or at
receptacles.
61-702
Vibration
mode to
verify
AC
voltage,
Non-Contact
Voltage Tester
Use it for one-touch
indication of power without
test leads.
61-701
Frequency, data
hold, max hold,
CAT III - 600V
Voltage Tester with
Shaker
Use it for tactile feel of AC
voltage
Accessories
Includes
Carrying Case
C-700
Silicone Test Leads
TL-102
700 Series Specifications
61-701
RANGE & RESOLUTION
61-702 & 61-704
BASIC ACCURACY
RANGE & RESOLUTION
BASIC ACCURACY
AC VOLTAGE
200.0/600 V
1.2%
2000m/200.0/750 V
1.2%
DC VOLTAGE
AC CURRENT
RESISTANCE
CAPACITANCE
FREQUENCY
20.00/200.0/600 V
200.0 A
200.0/200.0k Ω Scale
200.0µ F
2.000k/20.00k/40.00k Hz (Auto)
0.5%
3.0%
1.0%
3.0%
0.1%
2000m/200.0/1000 V
200.0 A
200.0/200.0k Ω
200.0µ F
—
0.5%
3.0%
1.0%
3.0%
E-12
www.idealindustries.com
Harmonics Tester
Use it to ensure that a circuit
contains clean power, free of
harmonic distortion.
1-800-435-0705 for Customer Service
Test and Measurement
400 Amp Clamp Meter
Features
■
400AAC current capability
■ Data hold
■ Auto ranging
■ Auto power off
730 Series
■ Low battery indication
■ Overload protection on
all ranges
61-734
Accessories
Includes
Carrying Case
C-98
Standard Test Leads
TL-58
730 Series Specifications
61-734
RANGE & RESOLUTION
ACCURACY
AC VOLTAGE
400.0/600 V
2%
DC VOLTAGE
400.0/600 V
1.5%
AC CURRENT
40.00/400.0 A
2%
RESISTANCE
400.0/4000 Ω
2%
1-800-435-0705 for Customer Service
www.idealindustries.com
E-13
600 Amp Clamp Meters
Features
■
600AAC current capability
■ Data hold
61-762
■ Auto power off
True RMS,
peak hold
■ Low battery indication
760 Series
■ Overload protection
61-760
NCV
Accessories
Includes
Carrying Case
61-179
Standard Test Leads
TL-58
760 Series Specifications
61-760
RANGE & RESOLUTION
61-762
BASIC ACCURACY
RANGE & RESOLUTION
AC VOLTAGE
200.0/750 V
1.0%
400.0/750 V
1.0%
DC VOLTAGE
AC CURRENT
RESISTANCE
2.000/200.0/1000 V
20.00/200.0/400.0/600 A
200.0/200.0k Ω
0.5%
1.5%
1.0%
4.000/40.00/400.0/1000 V
40.00/600 A
400.0 Ω
0.5%
1.5%
1.0%
E-14
www.idealindustries.com
BASIC ACCURACY
1-800-435-0705 for Customer Service
Test and Measurement
1000 Amp Clamp Meters
Features
■
1000AAC current capability
■ Data hold
61-726
■ Auto power off
True RMS, AC/DC current,
capacitance, frequency,
peak hold, min/max, highspeed bar graph
■ Low battery indication
■ Overload protection on
720 Series
■ Large digit display
all ranges
61-720
61-722
61-724
True RMS,
frequency,
peak hold,
max hold
True RMS,
AC/DC
current,
frequency,
max hold,
backlight
Accessories
Includes
Carrying Case
C-91
Standard Test Leads
TL-58
720 Series Specifications
AC VOLTAGE
61-720
61-722
61-724
61-726
RANGE & RESOLUTION
ACCURACY
RANGE & RESOLUTION
ACCURACY
RANGE & RESOLUTION
ACCURACY
RANGE & RESOLUTION
ACCURACY
200.0/600 V
1.2%
200.0/600 V
1.2%
200.0/600 V
1.2%
4.000/40.00/400.0/600 V (Auto)
1.7%
600 V
0.5%
400.0m/4.000/40.00/
400.0/600 V
0.25%
200.0/1000 A
1.75%
400.0/1000 A
1.75%
200.0/1200 A
1.5%
400.0/1200 A
1.5%
1.2%
400.0/4.000k/40.00k/400.0k/
4.000M/40.00M Ω (Auto)
0.3%
4.000n/40.00n/400.0n/
4.000µ F (Auto)
3.0%
100.00/1.0000k/100.00k/
500.0k Hz (Auto)
0.1%
DC VOLTAGE
2.000/200.0/600 V
0.5%
600 V
0.5%
AC CURRENT
20.00/200.0/1000 A
1.5%
20.00/200.0/1000 A
1.5%
DC CURRENT
—
—
RESISTANCE
200.0/200.0k Ω
CAPACITANCE
—
—
FREQUENCY
—
20.00/2.000k Hz (Auto)
1-800-435-0705 for Customer Service
1.2%
2.000k/200.0k Ω
1.2%
2.000k/200.0k Ω
—
0.1%
20.00/2.000k Hz (Auto)
0.1%
www.idealindustries.com
E-15
2000 Amp Clamp Meters
Features
■
2000A current capability
■ Broad frequency response –
40Hz to 1kHz
740 Series
■ Low battery indication
■ Overload protection on
all ranges
61-742
True RMS, AC/DC
current, analog
output, diode test,
peak hold
61-740
Data hold
61-741
AC/DC current,
analog output,
diode test, max
hold
Accessories
Includes
Carrying Case
C-91
Standard Test Leads
TL-58
740 Series Specifications
61-740
61-741
61-742
RANGE & RESOLUTION
ACCURACY
RANGE & RESOLUTION
ACCURACY
RANGE & RESOLUTION
ACCURACY
AC VOLTAGE
40.00/400.0/750 V
1.0%
400.0/750 V
1.5%
40.00/400.0/750 V
1.5%
DC VOLTAGE
40.00/400.0/750 V
1.0%
400.0/1000 V
1.0%
40.0/400.0/1000 V
1.0%
AC CURRENT
400.0/2000 A
1.0%
400.0/2000 A
1.5%
400.0/2000 A
1.5%
400.0/2000 A
1.5%
400.0/2000 A
1.5%
1.5%
400.0/4000 Ω
1.5%
400.0/4000 Ω
1.5%
4000 Hz
1.5%
DC CURRENT
—
RESISTANCE
400.0/4.000k/40.00k/400k Ω
FREQUENCY
—
E-16
www.idealindustries.com
—
1-800-435-0705 for Customer Service
Test and Measurement
Analog
Clamp Meters
61-710
600AAC current, Ohms scale on
dial drum, broad frequency
response (50 to 400 Hz)
Features
■ Analog display
■ Pointer lock
■ 5-year warranty
710 Series Specifications
710 Series
Includes carrying case
61-710
61-711
RANGE & RESOLUTION ACCURACY
AC VOLTAGE
150/300/600 V
RANGE & RESOLUTION ACCURACY
3.0% F.S.
150/300/600 V
60 V
3.0% F.S.
6/15/60/150/300 A
3.0% F.S.
1k/10k Ω
2.0% F.S.
DC VOLTAGE
—
AC CURRENT
6/20/60/200/600 A
3.0% F.S.
RESISTANCE
2k Ω
3.0% F.S.
300AAC
Current
capability,
DC voltage,
temperature
-4° F to 302° F (-20° C to 150° C)
(+/- 9° F [+/- 5° C])
—
TEMPERATURE
3.0% F.S.
61-711
Leakage Current Clamp Meter
Features
■
40mA to 60AAC current capability
■ Data hold
■ Analog bar graph
■ Min/max
Includes carrying case
61-452
Current Clamp Specifications
61-452
RANGE & RESOLUTION
ACCURACY
AC VOLTAGE
400.0 V
1.5%
AC CURRENT
40.00/400.0m/4.000/40.00/60.0 A
2.0%
RESISTANCE
400.0 Ω
1.0%
1-800-435-0705 for Customer Service
www.idealindustries.com
E-17
Features
■ Ground resistance
measurements
■ Auto ranging
Ground Resistnce Meters
■ Auto power off
61-781
Ground Resistance Clamp
Simple-clamp-on operation,
ground leakage current, audible
resistance indication, open jaw
indication, data hold, protective
case and calibration loop
included
61-788
MEGGER® 3-Pole Meter
2- & 3-point fall of potential
methods, easy single pushbutton operation, includes
terminal shorting bars,
rugged weatherproof case,
optional lead set (61-798)
not included
61-789
MEGGER® 4-Pole Meter
3- & 4- fall of potential
methods, soil resistivity, easy
single push-button operation,
includes terminal shorting
bars, rugged weatherproof
case, optional lead set
(61-798) not included.
61-798
MEGGER® Earth Resistance Lead
Set Kit
Kit includes four test leads with
alligator clips (3,15, 30, 50m), 20
in. auxiliary grounding rods (2 pr.)
and padded nylon carrying case
780 Series Specifications
GROUND RESISTANCE
GROUND LEAKAGE CURRENT
61-781
61-788
61-789
RANGE & RESOLUTION
ACCURACY
RANGE & RESOLUTION
ACCURACY
RANGE & RESOLUTION
ACCURACY
0.250/9.999/99.99/
199.9/400.0/600.0/1500 Ω
1.5%
200.0/2.00kΩ
2.0%
400.0/600/1500 Ω
2.0%
1.000m/10.00m/1000m/15.00 A
2.0%
SOIL RESISTIVITY
—
—
—
—
20.00/200.0/2.000k/20.00kΩ
2.0%
MEGGER is a registered trademark of Megger, Inc.
®
E-18
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
Features
for proper insulation
■ Checks existing
installations and motor
windings for
breakdowns in
insulation
Insulation Testers
■ Checks new installations
61-791
MEGGER® Hand-held
Insulation Tester
Test voltage: 250/500/1000V,
test inhibition >25V, default
voltmeter to 600V AC/DC,
digital display with analog
arc, auto discharge, auto
power off, auto ranging,
protective rubber boot,
continuity, low battery
indication, Cat III – 300V,
includes carrying case
61-792
MEGGER® 5kV Insulation
Tester
500V/1000V/2500V/5000V
test voltages, battery or
hand-crank operation, auto
discharge, AC/DC voltage
to 600V, battery test,
Cat III-300V, includes
carrying case
Insulation Tester
Specifications
TEST VOLTAGE
61-793
61-785
MEGGER® Hand-Crank
Insulation Tester
500V test voltage, handcrank operation,
compact and lightweight,
includes carrying case
Analog Insulation
Tester
125/250/500/1000V
test voltages, analog
display, live circuit
indicator, remote
control test probes,
backlight
61-785
61-791
RANGE & RESOLUTION
ACCURACY RANGE & RESOLUTION
125/250
500/1000 V
INSULATION
RESISTANCE
20M/50M/
1000M/2000MΩ
CONTINUITY
—
61-792
ACCURACY
250/500/
1000 V
5.0%
RANGE & RESOLUTION
61-793
ACCURACY
500/1000/
2500/5000 V
999MΩ
3.0%
0.01-100Ω
3.0%
100k - 20GΩ
RANGE & RESOLUTION
ACCURACY
500V
5.0%
0-200MΩ
5.0%
0-100Ω
5.0%
MEGGER® is a registered trademark of Megger, Inc.
1-800-435-0705 for Customer Service
www.idealindustries.com
E-19
3-Phase Power Analyzer
The IDEAL Power Analyzer. The most versatile and easy-to-use power quality test instrument on the market. Four programs measure
and analyze power quality on both single- and three-phase electrical systems. Instantaneous readouts including tables, bar graphs and
even individual waveforms make job site data interpretation easy. With a real-time clock and 1MB of memory, the Power Analyzer
stores data that can be downloaded to a personal computer for in-depth analysis using PowerVision™ Software.
The Energy and Harmonics Program comes standard with the IDEAL Power Analyzer. Disturbances,
Check-Meter and Fast-Check Programs are available separately. These programs allow the user
to monitor additional facets of power quality with a single test instrument. The details of each
program are discussed on page E-37.
800 Series
Everything a professional needs for monitoring and analysis in a single unit. Rugged,
versatile and loaded with features including computer compatibility. There have always been
test instruments that help make the job easier, but the IDEAL Power Analyzer has taken
power quality analysis to a new level.
Features
■ Single- or three-phase measurements
■ True RMS
■ Data logging (1MB memory)
■ Auto ranging
■ Min/max/avg
■ Energy and Harmonics Program
■ PowerVision Software
■ Optional programs:
Disturbances
Check-Meter
Fast-Check
Power Measurements
■ Kilowatts (kW)
■ Voltamperes (VA)
■ Inductive reactive power (kvarL)
■ Capacitive reactive power (kvarC)
■ Power factor (PF)
■ Lightweight, portable design
■ Frequency (Hz)
■ Easy-to-use push-button operation
■ Kilowatt hours (kWh)
■ Password protected on-screen setup
■ Reactive power per hour
160 x 160 pixel LCD
■ RS-232 interface
■
(kvarhL, kvarhC)
Harmonics Measurements
■ Customized data collection
■ Real-time clock
■ Total harmonic distortion (%THD)
■ Programmable trigger-points and
■ Harmonic factorization to
51st harmonic
start/stop time
Power Analyzer Display Screens
Program Setup
E-20
Table
www.idealindustries.com
Exploded View
Bar Graph
Scope View
Waveform Zoom
1-800-435-0705 for Customer Service
Test and Measurement
Standard Equipment
61-805
Backlight, neutral
current
measurements,
auto-detect
clamps, optional
FIFO memory
800 Series
61-806
Power Analyzer
1000AAC
Clamp Adapters
RS-232
Interface/
Power Supply
Standard Equipment
Model 805 Analyzer
61-805
61-805-2K
•
•
61-806
61-807
•
•
•
•
Model 806 Analyzer
1000AAC Clamp
Adapters (3)
•
200/2000AAC Clamp
Adapters (3)
Test Leads with
Alligator Clips
Power Analyzer Specifications
•
100AAC Clamp
Adapter (1)
•
ACCURACY
AC VOLTAGE
20 to 500 V (phase-neutral)
20 to 866 V (phase-phase)
0.5%
0.5%
AC CURRENT
10 to 1000 A (with supplied clamp adapters)
1.0%
ACTIVE POWER
866 kW (with supplied clamp adapters)
1.0%
REACTIVE POWER
866 kW (with supplied clamp adapters)
1.0%
0.5 to 1.0
1.0%
POWER FACTOR
Test Leads with
Alligator clips (4)
•
•
•
•
Power supply/RS-232
Inerface and Cables
•
•
•
•
PowerVision™ Analysis
Software
•
•
•
•
Protective Carrying Case
•
•
•
•
61-805 & 61-806
RANGE & RESOLUTION
See page E-36 for a complete listing of Power Analyzer accessories.
PowerVision™ Software
For in-depth analysis, data stored in
the Power Analyzer can be downloaded
to a personal computer and viewed
through PowerVision software.
PowerVision provides multiple ways to
view basic and detailed information,
allowing you to customize
readouts according to your
troubleshooting needs.
1-800-435-0705 for Customer Service
Disturbances
Program
Fast-Check
Program
Check-Meter
Program
See page E-37 for a complete write-up
on Power Analyzer programs.
www.idealindustries.com
E-21
Power Clamp Meters
Features
■
61-802
2000A AC/DC current capability
kVA, kVAR, power
factor, frequency,
3-phase power
calculations, dual
display, memory
recall
■ True RMS
■ Kilowatts
■ Data hold
800 Series
■ Auto ranging
■ DC current zero function
■ Overload protection
61-800
2100AAC current
capability, 2500ADC
current capability,
temperature, analog
output (current
ranges), relative
mode, min/max,
audible continuity
Accessories
Includes
Carrying Case
C-800
Premium Test Leads w/Alligator Clips
TL-100
800 Series Specifications
61-800
61-802
RANGE & RESOLUTION
ACCURACY
AC VOLTAGE
4.000/40.00/400.0/600 V
1.5%
200.0/500/600 V
1.5%
DC VOLTAGE
400.0m/4.000/40.00/400.0/600 V
1.5%
200.0/500/800 V
1.5%
AC CURRENT
400.0/1000/2100 A
1.5%
200.0/500/2000 A
1.5%
DC CURRENT
400.0/2000/2500 A
1.5%
200.0/500/2000 A
1.5%
KILOWATT (TRUE POWER)
40.00/400.0/1200 kW
2.5%
100.0/1000/1200 kW
2.0%
kVAR (REACTIVE POWER)
—
100.0/1000/1200 kVAR
2.0%
100.0/1000/1200 kVA
2.0%
kVA (APPARENT POWER)
RESISTANCE
FREQUENCY
TEMPERATURE
E-22
—
40.0/400.0 Ω
1.0%
—
-50.0° to 1000° F
www.idealindustries.com
RANGE & RESOLUTION ACCURACY
—
50.0/60.0/400.0 Hz
1.0%
An easy-to-read dual display facilitates
multiple readings. A useful feature for
viewing such combinations as: power
factor and kW, frequency and volts,
volts and amps, or kVAR and kVA.
0.5%
—
1-800-435-0705 for Customer Service
Features
ME LIMI
ETI
TED
LIF
Test and Measurement
W
AR
Y
• IDEAL •
RAN
■ Measures voltage drop under full load*
■ True RMS
T
Arc Fault
Tester
■ Peak voltage
SureTest® Circuit Analyzers
■ Line voltage
61-155
■ Frequency
Tests AFCIs for proper
operation
■ Ground to neutral voltage
■ Ground impedance
■ Hot and neutral conductor impedances
■ Identifies proper wiring in 3-wire receptacles
■ Identifies false (bootleg) grounds
■ Tests GFCIs for proper operation
■ Verifies isolated grounds
(with 61-176 adapter)
*12A, 15A, 20A load tests
Accessories
Includes
Carrying Case
61-179
1’ Extension Cord for 61-154, 61-155
61-182
Optional
Ground Continuity Adapter
61-175
Isolated Ground Adapter
61-176
Alligator Clip Adapter for
61-154 & 61-155
61-183
61-156
Made in USA
Harmonics (%THD,
to 17th harmonic),
power factor, event
recording
61-154
1-800-435-0705 for Customer Service
www.idealindustries.com
E-23
Features
■ Positively identifies circuit breakers
and fuses without service interruption
■ Hand-held receiver
■ Visual and audible indicators
■ 5-year warranty
Circuit Breaker Finders
61-055
Automatic Circuit Identifier
with E-Z Check® Plus
Microprocessor controlled
sensitivity level, verifies proper
wiring, checks GFCI operation
61-052
Circuit Identifier with
E-Z Check® Plus
Adjustable sensitivity
levels, verifies proper
wiring, checks GFCI
operation,
61-510
Circuit Identifier
Adjustable sensitivity
levels
61-560
Adapter Set
For 61-510
E-24
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
SureTest® Arc Circuit Tester
Arc Fault
Tester
Features
■ Tests AFCIs for proper operation
61-056
■ Tests GFCIs for proper operation
SureTest Arc
Circuit Tester
■ Verifies wiring configuration
Accessories
Receptacle Testers
Tests AFCI/GFCI
devices for
proper operation
■ Compact size fits comfortably in pocket
Optional
1’ Cord Adapter
61-177
Allligator Clip Adapter
61-184
Carrying Case with Belt Clip
C-50
Made in USA
E-Z Check® Circuit Testers
Features
■ Tests for correct wiring, open ground, reverse
■
■
■
■
■
polarity, open hot, open neutral, hot on neutral,
hot and ground reversed with open hot, and
ground fault interruption in 3-wire, 125VAC
circuits
No-slip ergonomic design maximizes comfort
Premium neon lamps prevent false readings
Tough, impact-resistant case
Tests GFCI receptacles for proper operation
5-year warranty
61-051
E-Z Check® Plus
GFCI Circuit Tester
Tests GFCI
receptacles for
proper operation
61-035
E-Z Check®
Circuit Tester
Made in USA
Receptacle Testers
Features
■ Warns against faulty wiring
in 3-wire receptacles
■ For use on 125VAC circuits
■ 5-year warranty
61-501
GFCI
Receptacle Tester
Tests GFCI
receptacles for
proper operation
61-500
Receptacle
Tester
1-800-435-0705 for Customer Service
www.idealindustries.com
E-25
Vol-Con® Elite
Features
■ Digital circuitry for better
resolution
Digital Voltage Testers
■ Tests for AC Voltage from 24-600VAC
■ Tests for DC Voltage from 6-220VDC
■ Audible continuity
■ Non-contact voltage indication
■ Low impedance to eliminate ghost
voltages
■ Replaceable silicone test leads
■ Integral lead storage
61-092
Vibration mode
Accessories
Includes
Silicone Test Leads
TL-102
Optional
Carrying Case
C-90
61-090
Vibration mode gives a tactile
indication of the voltage level.
Non-contact voltage sensor easily
locates breaks in power cords.
E-26
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
Features
■ Extremely rugged and reliable
Solenoid Voltage Testers
■ Vibrates when voltage is present
■ Tests for AC Voltage
■ Tests for DC Voltage
■ Replaceable leads with shielded probe tips
■ Bright, long-life LED’s and neon indicator lamp
■ Dual voltage indication for backup safety
■
5-year warranty
61-076
Vol-Con® Voltage/
Continuity Tester
Automatic switching
continuity tester, tests
from 5-600V AC/DC
Accessories
Includes
Standard Test Leads
61-070
Optional
Resistor-fused Leads*
Padded Nylon Case
61-072
C-90
Standard Leather Case
61-010
Premium Leather Case
61-020
*Special, current-limiting resistor in each lead acts as a fuse to
open in a short-circuit situation.
61-065
Vol-Test® Voltage Tester
Tests from 80-600V AC/DC
1-800-435-0705 for Customer Service
www.idealindustries.com
E-27
Features
Solenoid Voltage Testers
■ Extremely rugged and
reliable tester
■ Vibrates when voltage is
present
■ Tests AC/DC Voltage
■ Replaceable leads with
shielded probe tips
61-086
■ Bright, long-life LED’s and
neon indicator
■ Dual voltage indication for
backup safety
■ Compact size
■ 5-year warranty
Vol-Con® XL
Voltage/Continuity
Tester
Audible continuity,
audible voltage
indication, tests from
6-600V AC/DC
Accessories
Includes
Standard Test Leads
TL-80
Optional
Resistor-fused Leads*
Padded Nylon Case
TL-82
C-90
Standard Leather Case
61-010
Premium Leather Case
61-020
*Special, current-limiting resistor in each lead acts as a fuse to
open in a short-circuit situation.
61-085
Vol-Test® XL
Voltage Tester
Tests from
80-600V AC/DC
One hand operation makes receptacle
testing quick and simple.
E-28
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
Features
■ Split-Jaw™ current measurements
■ 200AAC* current capability
■ Audible continuity
■ Data hold
■ Auto power off
Multi-tester
■ Replaceable test leads
■ Integral lead storage
■ Low battery indication
61-095
Split-Jaw™
Accessories
Includes
Test Leads
TL-95
Optional
Carrying Case
C-90
61-095 Specifications
61-095
AC VOLTAGE
750 V
1.5%
DC VOLTAGE
1000 V
1.0%
AC CURRENT
200.0 A
3.0%
RESISTANCE
2000 Ω
1.0%
*Note: Jaw opening is 1 in. (up to 1/0 copper cable)
1-800-435-0705 for Customer Service
www.idealindustries.com
E-29
Non-Contact Voltage Tester
Features
■ Tests for voltage from 40V to 600V AC
■ Audible and visual indication
■ Locates breaks along live insulated
61-061
Electrical Testers
wires
■ Tests for energized circuits
Powr-Glo™
Audible
61-063
Volt-Sensor®
NCV Tester
Overmolded cushion
grip
Continuity Tester
Features
■ Checks continuity of dead circuits and
■
■
■
■
■
ground on conduit systems and identifies
wires in multi-wire cables
Light signal indicates completed circuit
Bulb-in end can serve as flashlight
Pocket clip functions as probe
Removable 4-ft. test lead with alligator clip
5-year warranty
61-030
Continuity Tester
Circuit Tester
Features
■ Industrial-quality tester checks voltage
■
■
■
■
from 80V to 600V AC/DC
Neon test lamp at front of probe
Resistors reduce voltage reaching leads
24-in. lead — rated 1,000V
5-year warranty
E-30
www.idealindustries.com
61-040
Test-Glo™ Circuit
Tester
1-800-435-0705 for Customer Service
Test and Measurement
Twin Lead Testers
Features
Features
80V
to 500V AC/DC
■ Heavy-duty test probes
■ 5-year warranty
■ Check voltage from
Electrical Testers
110V, 220V, 277V and 460V
AC/DC
■ Individual resistors and bypass resistors
for each voltage range
■ 5-year warranty
■ Checks
61-503
Twin Lead Tester
61-504
4-Way Electrical Tester
Wire Sorter
Features
six-single or six-pair
of unpowered wires with or without a
known ground path
Quickly identifies unmarked wiring
Locates proper wiring in bundled groups
Works on de-energized circuits
5-year warranty
■ Easily sorts up to
■
■
■
■
1-800-435-0705 for Customer Service
61-530
Wire Sorter
www.idealindustries.com
E-31
3-Phase/Motor Rotation Tester
Features
■ Identifies three-phase sequence
■ Indicates motor rotation
3 Phase/Motor Rotation
■ Checks for open phases
600V
■ Meets IEC-1010 (EN61010)
■ For use up to
safety requirements
■ 5-year warranty
Includes carrying case
61-521
3-Phase/Motor
Rotation Tester
Phase Rotation Tester
Features
■ For use up to 600V
■ Broad operating range
■ Color-coded insulators over
alligator clips
■ Shock-resistant housing
■ No exposed metal parts
■ Easy-to-read
■ 5-year warranty
Includes carrying case
E-32
www.idealindustries.com
61-520
Phase Rotation
Tester
1-800-435-0705 for Customer Service
Test and Measurement
Light Meter
Specialty Testers
Features
■ Wide lighting range
■ Foot candle and lux measurement
■ Remote light sensor
■ Cosine and color corrected
■ Peak hold
■ Digital and analog output
■ Compact and lightweight
■ Low battery indication
■
5-year warranty
Includes carrying case
61-681
Digital Light Meter
Light Meter Specifications
61-681
FOOT CANDLES
20.00/200.00/2000.0/200000
2%
LUX
20.00/200.00/2000.0/200000
2%
Infrared Thermometer
Features
■
15:1 angle of viewability
■ Built-in laser pointer
■ Backlit display
■ Auto power off
■ Measures temperatures from 0° F to
(-18° C to 260° C)
■ 5-year warranty
61-682
Infrared Thermometer
Includes carrying case
Specifications
500° F
61-682
RANGE & RESOLUTION
ACCURACY
0° F to 500° F (-18° C to 260° C)
3.0%
1-800-435-0705 for Customer Service
www.idealindustries.com
E-33
Features
■ Provide safe, easy measurement of AC current
■ Extend the current measurement capabilities of
digital multimeters
Current Clamp Adapters
61-333
500AAC
61-332
200AAC
61-436
1000AAC
61-334
600A AC/DC
61-451
300AAC
Flexible Clamp Adapters
Features
■ Provide safe, easy measurement of high
AC currents
■ Large opening and flexible materials to
wrap around conductors and bus bars
■ Shape Memory allows pre-forming
before installation
■ Extend the current measurement
capabilities of digital multimeters
Specifications
61-330
1000AAC
61-331
300/3000AAC
61-330
61-331
61-332
61-333
61-334
61-436
61-451
AC CURRENT
1000 A
300/3000 A
200 A
500 A
600 A
1000 A
300 A
DC CURRENT
—
—
—
—
600 A
—
—
1mV/A
1mV/A/10mV/A
1mV/A
1mV/A
1mV/A
1mV/A
1mV/A
OUTPUT SIGNAL
MAX CONDUCTOR SIZE
8” (19cm)
8” (19cm)
0.78” (19.8mm)
1.18” (30mm)
SENSOR LENGTH
24” (61cm)
36” (91cm)
—
—
E-34
www.idealindustries.com
1.125” (28.5mm) 2.25” (57.1mm)
—
—
0.91” (23mm)
—
1-800-435-0705 for Customer Service
Test and Measurement
ProVision™ Software
The easy-to-use ProVision Software allows users to translate the data into a wide range of graph and
table formats for in-depth analysis. It’s a valuable resource for both troubleshooting and ISO compliance.
ProVision™ Software & Cables
Features
■ Creates easy-to-read tables and graphs
■ Retrieves data stored in
PlatinumPro® meters
■ Virtual DMM for real-time viewing
of data acquisition
■ Export files to a spreadsheet or database
for storage and analysis
■ Compatible with Windows 98, 2000, NT and XP
320 Series
ProVision Software
61-904
320 Series ProVision™ Software
490 Series
ProVision Software
61-900
490 Series ProVision™ Software
630 Series
ProVision Software
61-901
630 Series ProVision™ Software
RS-232 Cables
61-902
Optical RS-232
Cable
For 490 and 630
Series Meters
1-800-435-0705 for Customer Service
61-905
Optical RS-232
Cable
For 320 Series
Meters
www.idealindustries.com
E-35
Power Analyzer Accessories
C-1000
Carrying Case
61-454*
61-811**
1000AAC Clamp Adapter
(set of 3)
PS-351*
PS-352**
RS-232 Interface/
Power Supply with
cables
TL-805
Voltage Leads with
Alligator Clips
Description
Cat. No.
200/2000AAC clamp adapters for 61-805 (set of 3)
61-453
1000AAC clamp adapters for 61-805 (set of 3)
61-454
500AAC clamp adapters for 61-805 (set of 3)
61-455
5AAC clamp adapters for 61-805 (1)
61-456
200/2000/20000AAC Flexible Clamp Adapters (set of 3)
61-457
Disturbances program for 61-805
61-474
Check-Meter program for 61-805
61-475
Fast-Check program for 61-805
61-476
61-457
200/2000AAC clamp adapters for 61-806 (set of 3)
61-810
1000AAC clamp adapters for 61-806 (set of 3)
61-811
200/2000/20000AAC
Flexible Clamp
Adapters
500AAC clamp adapters for 61-806 (set of 3)
61-812
100AAC clamp adapter for 61-806 (1)
61-813
5AAC clamp adapter for 61-806 (1)
61-814
Disturbances program for 61-806
61-815
Check-Meter program for 61-806
61-816
Fast-Check program for 61-806
61-817
* For use with 61-805
** For use with 61-806/807
E-36
www.idealindustries.com
1-800-435-0705 for Customer Service
Test and Measurement
61-455*
61-812**
500AAC Clamp
Adapter (set of 3)
61-456*
61-814**
5AAC Clamp
Adapter
Power Analyzer Accessories
61-453*
61-810**
200/2000AAC Clamp
Adapter
(set of 3)
61-813**
100AAC Clamp Adapter
Power Analyzer Programs
Extend capabilities of 800 series Power Analyzer. Up to
four programs loaded on analyzer.
61-474*
61-815**
Disturbances Program
• Tracks sags, swells and transients
• Programmable trigger points
• Captures individual waveforms for analysis
61-475*
61-816**
Check-Meter Program
• Monitors performance of in-line energy meters
• Stores data and provides comparison against
mechanical or electrical meters
• Monitors key power and energy measurements
61-476*
61-817**
Fast-Check Program
• Captures transient waveforms caused by
motor start-ups
• Monitors key power and energy
measurements
1-800-435-0705 for Customer Service
* For use with 61-805
** For use with 61-806/807
www.idealindustries.com
E-37
Digital Multimeter and
Clamp Meter Accessories
61-561
Power Analyzer Accessoires
Line splitter with direct
and 10x sensitivity
Thermocouples
Features
■ Measures up to 1500˚ F (816˚ C)
61-465
■ K-type thermocouples plug into
Thermocouple Adapter
digital multimeter or clamp meter
voltage ports with 61-465 adapter
61-461
Beaded K-type
thermocouple
SureTest® Accessories
61-181
500 Amp
61-177* and 61-182**
61-560
Circuit Identifier
Adapter Set
for 61-510
Clamp Adapter
for 61-157
1-ft. Extension Cord
61-175 and 61-176
Ground Continuity and
Isolated Ground Adapters,
respectively
61-183** and 61-184***
Alligator Clip Adapters
* For use with 61-156/61-157
** For use with 61-154/61-155
*** For use with 61-056
E-38
www.idealindustries.com
1-800-435-0705 for Customer Service
Carrying Cases
Test and Measurement
61-445
Small nylon carrying
case with four
convenient pockets
61-010
Leather case for use
with voltage testers
C-290
Nylon carrying case
for use with DMM’s
61-179
Nylon carrying case for
use with SureTest®
Circuit Analyzers,
730 Series and 760
Series Clamp Meters
61-020
Premium leather case
for use with voltage
testers
C-90
Nylon carrying case
for use with all
Vol-Con® and
Vol-Test® Testers
61-447
C-700
Nylon carrying case
for use with the 700
Series Clamp Meter
1-800-435-0705 for Customer Service
Large nylon carrying
case with six large
inside pockets and
one zippered outside
pocket
www.idealindustries.com
E-39
Carrying Case Selection Guide
760
61-760
61-742
61-741
61-740
61-734
740 Series
61-726
61-724
61-722
61-720
61-704
61-702
61-701
61-452
720 Series
61-179 Nylon Carrying Case
C-452
Nylon Carrying Case
C-700
Nylon Carrying Case
C-800
Nylon Carrying Case
C-90
Carrying Case
C-91
Nylon Carrying Case
•
•
•
•
•
•
•
•
•
•
•
•
•
•
61-155
61-157
•
61-681
•
61-092
•
•
61-090
•
61-445 Small Carrying Case
61-086
61-179 Nylon Carrying Case
61-085
61-158
•
61-156
•
•
SureTest®
61-154
•
61-020 Premium Leather Tester Case
www.idealindustries.com
•
•
61-682
61-076
61-010 Leather Tester Case
E-40
800
•
Voltage Testers
Nylon Carrying Case
•
•
TESTER CARRYING CASE
SELECTION GUIDE
C-90
•
•
61-065
Selection Guide
700 Series
CLAMP METER CARRYING CASE
SELECTION GUIDE
61-635
•
61-633
•
61-802
•
61-614
•
630
61-800
•
61-610
•
61-762
61-495
•
610
61-609
61-494
•
61-603
61-482
•
Nylon Carrying Case
61-602
61-481
C-290
61-601
61-361
600 Series
61-360
490
61-324
480
61-322
360
61-320
320 Series
MULTIMETER CARRYING CASE
SELECTION GUIDE
•
1-800-435-0705 for Customer Service
Test and Measurement
TL-435
TL-436
Industrial Test Lead Kit
Electrical Test Lead Kit
Kit contains: 1.5m silicone lead set, probes
w/SS tips, rigid alligator clips, flex pincer
clips, insulated alligator clips, insulated spade
lugs and padded zipper pouch, 1000V, 10A
rating
Kit contains: 1.5m silicone lead set,
probes w/SS tips, insulated alligator
clips and tri-fold pouch, 1000V, 10A
rating
Test Leads
Test Lead Kits
Test Leads
TL-58
Standard Test
Leads
TL-42
Test Leads with
alligator clips
TL-102
TL-100
Silicone Test
Leads
Premium Test
Leads
with alligator
clips
1-800-435-0705 for Customer Service
www.idealindustries.com
E-41
Replacement Parts Selection Guide
E-42
www.idealindustries.com
61-633
61-635
630
61-614
•
61-610
61-603
•
610
61-609
61-602
61-495
61-601
61-494
61-482
61-481
600 Series
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
61-802
•
61-800
•
•
•
•
•
•
•
•
•
•
•
800
61-742
•
•
740 Series
61-741
•
61-726
•
61-724
•
•
61-722
•
760
61-720
•
•
•
720 Series
61-711
710
•
•
61-704
61-702
61-701
•
•
•
•
•
•
•
•
•
61-740
•
•
61-762
•
•
61-760
•
61-734
•
61-710
FUSES
F-1
0.5A (250V) 0.25 x 1.25mm
BATTERIES
B-4
9V
B-1
1.5V (AA)
TEST LEADS
TL-58 Standard
TL-100 Premium leads w/alligator clips
TL-102 Silicone test leads
490
•
700 Series
CLAMP METER REPLACEMENT
PARTS SELECTION GUIDE
480
61-361
61-360
61-324
61-322
360
•
61-452
Selection Guide
FUSES
F-1
0.5A (250V) 0.25 x 1.25 in.
F-7
0.5A (250V) 5 x 20mm
F-16
0.25A (250V) 5 x 20mm
F-17
0.8A (250V) 0.25 x 1.25 in.
F-100 1A (500V)
.25 x 1.25 in.
F-101 16A (500V)
.25 x 1.25 in.
F-102 1A (600V)
.41 x 1.5 in.
F-103 16A (600V)
.41 x 1.5 in.
LA-3893 2A (600V)
6.35 x 25.4mm
LA-3895 0.5A (250V) 5 x 20mm
LA-3896 0.5A (500V) 6.35 x 32mm
LA-3897 10A (600V)
6.35 x 25.4mm
LA-3898 0.1A (250V) 5 x 20mm
BATTERIES
61-201 1.5V (LR44)
B-4
9V
B-1
1.5V (AA)
B-7
1.5V (AAA)
TEST LEADS
TL-34 Leads w/pin connectors
TL-58 Standard
TL-54 Test Leads
TL-100 Premium leads w/alligator clips
TL-102 Silicone test leads
RUBBER BOOTS
61-370 360 Series rubber boot
C-92
Pocket-style meters rubber boot
C-320 320 Series rubber boot
C-480 480 Series rubber boot
C-490 490 Series rubber boot
C-630 630 Series rubber boot
61-320
320 Series
MULTIMETER REPLACEMENT
PARTS SELECTION GUIDE
•
•
•
•
•
•
•
•
•
•
•
•
1-800-435-0705 for Customer Service
DataComm
F
LANTEK® 6 & LANTEK® 7 LAN Cable Certification Testers
Features of LANTEK® Products
TDR capability that works with copper and fiber
■
Permanent link testing using inexpensive patch
cables, provides more versatility and lowest cost of
ownership in the industry
■
Link adapter fits into case, no bulky adapters
extending from unit
■
Display or remote unit can initiate Autotest, Escape
and Talk feature
■
LANTEK® 6B
Certifier - Basic
PCMCIA dual slot provides for CompactFlash™
external memory and future capabilities
■
USB and RS232 ports
■ Certify up to CAT 6 / ISO E limits (250 MHz) and beyond to
■
Fiber and coax testing options available
Testers
■
350 MHz
■ 25 second CAT 6 full certification
Features
■ Upgradeable to LANTEK 7
LANTEK7B
LANTEK7P
Soft carrying case
✔
LANTEK® 7B
Certifier - Basic
Display unit with battery
✔
✔
Remote unit with battery
✔
✔
■ Certify up to CAT 7 / ISO F limits (600 MHz) and beyond to
LANTEK Reporter Software
✔
✔
Serial & USB cables
✔
✔
■ 35 second CAT 7 full certification
Two talksets & two AC wall adapters
✔
✔
■ Includes two each CAT 6 and ISO F CAT 7 TERA™ adapters
User manual, quick start guide & registration card
✔
✔
Two Category 7 channel adapters
✔
✔
Two Category 6 channel adapters
✔
✔
Two Category 7 Reference patch cords
✔
✔
Two Category 6 Reference patch cords
✔
✔
750 MHz
LANTEK® 6P and LANTEK® 7P
Certifier - Premium
Includes the features of the LANTEK 6B or 7B plus the features
listed in the charts below.
Features
LANTEK6B
Soft carrying case
Display unit with battery
LANTEK6P
✔
✔
✔
Hard carrying case
✔
PCMCIA Adapter
✔
64 MB compact flash
✔
USB port flash reader for PC
✔
Batteries (2) extra
✔
Offline dual bay battery charger
✔
Remote unit with battery
✔
✔
LANTEK Reporter Software
✔
✔
Serial & USB cables
✔
✔
Two talksets & two AC wall adapters
✔
✔
User manual, quick start guide & registration card
✔
✔
Description
Two Category 6 channel adapters
✔
✔
64MB Compact Flash Memory Card
2112-27-0605
Two Category 6 Reference patch cords
✔
✔
Fiber Cleaning Starter Kit
1219-00-1621
Hard carrying case
✔
Tera Adapter Testing Kit
1019-00-1105
PCMCIA Adapter
✔
Coax Adapter Testing Kit
1019-00-0343
64 MB compact flash
✔
USB port flash reader for PC
✔
Batteries (2) extra
✔
Offline dual bay battery charger
✔
Other LANTEK Accessories
Cat. No.
See your IDEAL representative for additional
specifications on all certification products
F-2
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm Equipment
FIBERTEK™ and TRACETEK™ Advanced Fiber Test Options
Features of FIBERTEK™ Products
Measures signal loss and length
■
850nm VCSEL light source enables Gigabit Ethernet
certification on Multimode fiber
■
Enables bi-directional, dual wavelength measurements
■
Full duplex talkset capability
Testers
■
FIBERTEKMMB Multimode Fiber Testing Basic Kit
FIBERTEKSMB Singlemode Fiber Testing Basic Kit
■ Provides easy switching of LANTEK® Cable Tester between
Copper and Fiber LAN testing
■ Provides easy switching of LANTEK® Cable Tester between
Copper and Fiber LAN testing
■ Separate loopback testing method for high precision length
■ Separate loopback testing method for high precision length
■ Includes 850 VCSEL and 1300nm Fabry Perot lasers for testing
Gigabit Ethernet systems
■ Includes 1310 and 1550nm adapters powered by Fabry Perot
lasers
■ Outstanding Temperature Compensation provides highly accurate
test results in a wide variety of environments
■ Outstanding Temperature Compensation provides highly accurate
test results in a wide variety of environments
FIBERTEKMMP Multimode Fiber Testing Premium Kit
FIBERTEKSMP Singlemode Fiber Testing Premium Kit
■ All of the features of the FIBERTEKMMB plus TRACETEK™ MM
■ All of the features of the FIBERTEKSMB Plus TRACETEK™ SM
(below):
(below):
Features of TRACETEK™ Products
Description
■
Enables LANTEK certification testers to provide an
event trace at a fraction of the price of an OTDR
Hard case, 850 & 1300 Adapters with ST® Connectors,
ST® Launch Cables & ST® Sleeves
FIBERTEKMMB
All contents of FIBERTEKMMB and TRACETEKMM
FIBERTEKMMP
■
Provides easy switching of LANTEK certification
tester between FIBERTEK™ loss and length
measurement and TRACETEK™
Hard case, 1310 & 1550 Adapters with FC Connectors, FC
Launch Cables & FC Sleeves
FIBERTEKSMB
All contents of FIBERTEKSMB and TRACETEKSM
FIBERTEKSMP
TRACETEK™ MM Adapter with FC to ST® Launch Cable
TRACETEKMM
Includes event plots that pinpoint significant losses
along the fiber
TRACETEK™ SM Adapter with FC to FC Launch Cable
TRACETEKSM
All contents of FIBERTEKMMB and FIBERTEKSMB
FIBERTEKALLB
All contents of FIBERTEKMMP and FIBERTEKSMP
FIBERTEKALLP
■
■
®
®
Provided with launch cable and appropriate
connectors
Cat. No.
Note: ST® is a registered trademark of AT&T.
See your IDEAL representative for additional
specifications on all certification products
1-800-435-0705 for Customer Service
www.idealindustries.com
F-3
LT8000 Series Cable Certification Testers
Accessories for LT8000 Series
Description
Cat. No.
Headsets, includes (2) headsets w/earphone and microphone, Vinyl
LT8TALKSET
Extra or replacement Battery pack for display or remote handsets
LT8BATTPACK
Field Calibration Adapter
LT8FIELDCAL
Deluxe hard-shell carrying case
LT8DCCA
Set of 2 110-Block Link Adapters
LT8110
Set of 2 Token Ring Link Adapters (Type 1, 1A, 2, 6, 6A IBM cabling)
LT8IBMA
(ThinNet), BNC-to-N Adapters for 10Base-5 (ThickNet) and BNC-to-
LT8COAXA
Testers
Set of 2 RJ-45 CAT5/5E Basic Link Adapters for LT8100 and LT8155
Set of 2 CAT5/5E Channel Adapters with 8-pin Modular Jack
LT8BASIC
LT8CHANNEL
Powerful graphical analysis software package for PC and Notebook
TDR upgrade kit for LT8155 and LT8600 Installed Base
LTGA
TDRKIT
LT8600 and LT8155
Set of 2 replacement rubber boot protectors for LT8000 headsets
■ Built in TDR capability provides easy to use analysis capability
LT8000 Series user’s guide
■ Options for Singlemode and Multimode power and light source
meter testing
Guide to LAN Installation and Testing
LANHDBK
AC Power Line Adapter, 120V/60Hz w/USA and Canada Style
Wall Plug, Compatible with the LT8000 Series and LANTEK Pro/XL
LT8USCAN
■ LT-Record Manager software supports all record keeping,
reporting requirements
■ Built-in tone generator
LT8BOOT
LT8MANUAL
Category 6 Adapters
Description
Cat. No.
■ Talk-set feature
ACKERMANN, WAEG6
B6IDEAL001
■ Uses job folders
ACTERNA, General
B6IDEAL001
AMP, STP
B6IDEAL001
LT8600T
BTR TELECOM, UE-DAT-300E and E-DAT-200
B6IDEAL001
■ Certify any Category cable (3, 5, 5e, 6) up to 300 MHz
KERPEN, Eline
B6IDEAL001
■ Storage capacity: 1,500 Autotests
ORTONICS, GigaMo+
■ LT8600T comes in soft carrying case
■ LT8600TSP comes in hard carrying case
LT8155T
B6IDEAL001
NEXANS, Class E/Class 6
B6NEXANS001
AMP Netconnect, Quantum UTP
B6AMP002
AVAYA, Gigaspeed
B6Lucent001
B6BRDREX001
thru
B6PANDUIT001
Brando-Rex, CAT6Plus
■ Certify any Category cable (3, 5, 5e) up to 155 MHz
■ Storage capacity: 1,500 Autotests
Hitachi - Manchester, Lantegra
B6SMP001
■ LT8155T comes in soft carrying case
HUBBELL, Next Speed XceleratorH XJ6 & 670
B6HUBBELL001
IBM, Silver Class E
B6-IBM-CLASS E
LT8100A
IBM, Silver Generic Cat 6
B6IBM-GENERIC
■ Certify any Category cable (3, 5, 5e) up to 100 MHz
INFRA IBCS
B6INFRA+001
■ Storage capacity: 150 Autotests
LEVITON, XCS
B6LEVITON003
■ LT8100A comes in soft carrying case
MOLEX, PowerCat
B6MOLEX001
NEXANS, Class E/Category 6
B6NEXANS001
NORDX/CDT 4800LX
B6NORDX001
NORDX/CDT, Bix, Channel Test Leads
PANDUIT, TX-6 Giga-Channel
F-4
www.idealindustries.com
B6NORDXBIX001
B6PANDUIT001
1-800-435-0705 for Customer Service
DataComm Equipment
VDV MultiMedia
Cable Tester
Available
LinkMaster™ Tester
Spring ‘04
Easy-to-use tester for
installers working with
voice, data and video
applications. One tester for all
applications!
■ Voice — supports 3-pair USOC
and 6-position RJ-11/12 jacks for
telephone cable testing
■ Data — supports both shielded and
■ Video — tests coax cable for opens
and shorts with F-connector interface
Testers
unshielded cable testing to
T568A/B (RJ-45)
t
s Grea
WorkCAT 56
n
o
ng
Cab li
NEW
■ Tests for opens, shorts, miswires, reversals and
Tests wiring configurations on UTP/STP cables. Checks for shorts,
miswires, reversals and split pairs. Debug feature, automatic
shut-off and low battery LED indication.
■ Designed to test installed twisted pair wiring
split pairs. Also indicates correct wiremap. Has automatic shut off
(to prolong battery life) and low battery indicator.
■ Easy to read LCD display with “PASS or FAIL” indicator after each
test
■ Tests unshielded and shielded modular plugs
■ Tone generator supports 4 different tones making fault isolation
easier
■ Main unit and remote allow one person testing
Description
Cat. No.
LinkMaster™ Tester and Remote
62-200
■ Identifies voltage on cables
■ One remote wiremap and testing unit is stored inside tester—
easier to keep all parts together
■ Uniquely designed remote accommodates RJ-11, RJ-45 and
DataLite™
Cable Identifier
F-style connectors
■ Can support up to 8 unique remotes that wiremap and test ports
— more efficient for one person testing (must order separately)
Description
Cat. No.
Kit with integrated remote and accessories
62-300
MiniTracker™ Tester
62-292
The most efficient method of identifying and troubleshooting
mislabeled networks. From a workstation outlet, DataLite™ unit
sends a electronic signal to patch panel. Modules, plugged into
patch panel, illuminate to indicate location of terminated cable.
■ Works on any communication wiring schematic
■ Quickly and accurately matches a patch panel port to its
corresponding workstation
■ Eliminates need to pre-label and sequentially order cable
Test for continuity, opens or shorts
in multiple or single runs of coax. Consists of
main unit and four remote color-coded F-type terminators. Each
terminator has a unique resistor value. A main unit and a least one
remote terminator are required to perform coaxial cable testing.
■ Identifies, or “maps”, different cable end points and cable runs
within a structure by identifying remote terminator color code
Description
Cat. No
DataLite™ Unit w/ 25 Modules (Blister Card)
33-840
DataLite™ Kit w/ 2 Power Units & 100 Modules (w/case)
33-841
DataLite™ Kit w/ 2 Power Units & 300 Modules (w/case)
33-843
DataLite™ Main Power Unit
Box of 100 Modules
1-800-435-0705 for Customer Service
62-292
ND-2055
■ Tone mode can be used to send a tone signal on coaxial
cable for tracing
■ Designed specifically for cable TV, security video, broadcast and
building/home automation system applications
Description
Cat. No.
MiniTracker™ Tester with 4 F-Type Terminators
62-202
www.idealindustries.com
F-5
LinkMaster™ PRO XL
NEW
LAN Cable Testers
The LinkMaster™ PRO XL Tester enables installers, contractors and
maintenance technicians to map, test and troubleshoot data and voice
communication cable and coax runs. Rugged, versatile, and easy-touse, they have mastered the link between performance, simplicity and
value for both commercial and residential applications.
Remote Jack for Patch Cords
■ Back-lighted LCD screen - N E W F EATU
EATU R E
Six Modes of Operation
• Cable Test
• Hub Blink
• Tone
• Length
• Coax
• Setup Mode
■ Blinks the hub - N E W F EATU
EATU R E
■ Has increased voice testing capabilities - N E W F EATU
EATU R E
■ Displays length measurement with test results - N E W F EATU
EATU R E
Main Jack for all Testing
Larger Back-lighted
LCD Screen
■ Snap-off battery cap
Press SEL to:
• Turn on back-light (Hold 2 sec)
• Execute current displayed mode
• Start new test cycle
• Select one of four tones
• Change pair being measured
for length
• Change user selectable options
– Beep On/Off
– Unshielded or Shielded Cable
– Units—Feet or Meters
Arrow Keys
• To change length constant
(see chart for required parameters)
• To change pair or pin selection for tone
• To scroll through setup selectable options
LinkMaster™ PRO XL and ABS™
Deluxe Kit
LinkMaster™ PRO XL Kit
■ Remotes have both RJ-11 and RJ-45 jacks - N E W F EATU
EATU R E
■ Tests UTP for shorts, opens, miswires, reversals, split pairs and
shield continuity
■ Tests coax for opens and shorts
■ Shows wiring errors
■ Tests and identifies with all eight twisted pair and coax remotes
■ Sends tone with four different signals
■ Displays test results in wire map format
Everything you need to
perform all test functions
for up to eight remote
mapping locations on
twisted pair and coax
cable is included in this
kit. ABS™ tester detects
dial tone, polarity,
presence of power, and is
an amplifier probe for
tone tracing.
■ Main tester
■ ABS™ tester
■ Eight twisted pair remotes
■ Eight CATV color-coded F-Terminators
■ Nine RJ-45 shielded jumper cables
■ Nine RJ-11 jumper cables
■ RJ-45 and RJ-11 adapter
■ RJ-45 to alligator clip cable assembly
■ RJ-11 to alligator clip cable assembly
■ Carrying case
Everything you need
to perform all test
functions for up to
eight remote mapping
locations on twisted
pair and coax cable
is included in this kit.
■ Main tester
■ Eight twisted pair
remotes
■ Eight CATV color-coded F-Terminators
■ Nine RJ-45 shielded jumper cables
■ Nine RJ-11 jumper cables
■ RJ-45 and RJ-11 adapter
■ RJ-45 to alligator clip cable assembly
■ RJ-11 to alligator clip cable assembly
■ Carrying case
Description
Cat. No.
Kit (POP Packaging)
33-880
Kit (International Packaging)
33-886
Cat. No.
Replacement Carrying Case
H-3412
Deluxe Kit with ABS™
33-881
Economy Kit w/one remote (International packaging)
33-887
Replacement Carrying Case
H-3412
RJ-45 to RJ-11 jack adapter (2/card) POP packaging
LA-4233
RJ-45 to F-connector adapter (2/card) POP packaging
LA-4234
LinkMaster™ remotes 2 through 8 only
(white carton & thermal label)
LA-4235
Description
F-6
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm Equipment
NAVITEK™ Network
Tester
LinkMaster™ PRO Tester
NEW
on ste d
Use Twi
x & air
Coa P
Available
Spring ‘04
The perfect tester for
troubleshooting a
structured network. Verifies
cable installation in a passive network and
tests network connectivity in an active one.
The popular LinkMaster™ PRO Tester enables installers, contractors
and maintenance technicians to map, test and troubleshoot data and
voice communication cable and coax runs. This tester successfully
demonstrates the link between performance, simplicity and value for
industrial, commercial and residential applications.
■ Most useful for network installers and
■ Tests UTP for shorts, opens, miswires, reversals, split pairs and
■ Displays Ethernet network speed and capabilities
shield continuity. Tests coax for opens and shorts.
■ Determines whether drop is active
■ Identifies port services such as Ethernet, ISDN, POTS and Token
Ring
■ Pings key devices to verify connectivity
■ Measures length on UTP, STP and coax
■ Verifies the integrity of the physical installation through wiremap,
■ Tests to eight twisted pair and coax remotes
length measurement, shield continuity and fault identification
■ Tone generator sends up to four different tones
■ Measures length up to 4 tones for cable tracing
■ Displays test results in wiremap format
■ Blinks the hub
■ Snap-off battery cap allows for easy battery change
■ Snap-off battery cap for easy battery change
■ Two size kits with unshielded and shielded cables
■ Large, easy-to-read, backlit LCD display
Original LinkMaster™
PRO Kit w/8 Remotes
Description
Cat. No.
Kit with Unshielded Jumper Cables
33-825
Kit with Shielded Jumper Cables
33-826
Replacement Large Case
H-3324
Description
Cat. No.
Kit with 8 remotes and jumper cables
62-510
Accessories
Description
Cat. No.
Security Kit - 8 position modular adapter and eight
RJ-45 to alligator clip lead sets
LA-4157
Set of eight color-coded F-terminators
LA-4159
BNC Accessory Kit
LA-4173
RJ-45 plug to RJ-11 jack adapter (2/card)
LA-4233
RJ-45 to F-connector adapter (2/card)
LA-4234
UTP/STP remotes 2 through 8
LA-4235
Original LinkMaster™
PRO Economy Kit
Description
Cat. No.
Kit with Unshielded Jumper Cables
33-835
Kit with Shielded Jumper Cables
33-836
Replacement Small Case
IA-4868
1-800-435-0705 for Customer Service
www.idealindustries.com
F-7
Testers
IT facility personnel
Amplifier Probe and Tone Generator
62-164
62-160
ABS™ Tester & ABS™ Signal Thrower
62-184
62-180
Testers
Amplifier Probe
■ Identifies and traces wire or cables within a group
■ Battery cap allows quick and easy battery replacement
■ Battery low indicator
ABS™ Tester
■ Amplifier probe with telephone troubleshooting capabilities
Tone Generator
■ Tone TRACE feature detects tone signal
■ Emits three different types of tones
■ Receives and reproduces telephone system dial tone
■ Auto-off after three hours of non-use
■ Indicates call addressing for correct telephone number
■ Tone can be added in any status
■ Polarity indicator tests for correct wiring and power
Description
Cat. No.
Amplifier Probe
62-164
Tone Generator
62-160
ABS™ Tester and ABS™ Signal Thrower™
■ Works with the ABS™ Tester to locate and identify cables
■ Emits three different types of signals
Amplifier Probe and Tone Generator Kits
■ Auto-off after 3 hours of non-use
Description
Cat. No.
ABS™ Tester
62-180
ABS™ Signal Thrower™
62-184
ABS™ Tester & ABS™ Signal Thrower Kits
33-854
33-862
33-864
33-852
Kits include: Amplifier Probe, Tone Generator, Lead Set, Cable
Assembly and flat tip
Description
Cat. No
Kit in soft black pouch
33-864
Kit in hard gray case
33-862
62-188
Kits include: ABS™ Tester, ABS™ Signal Thrower, Lead Set and
Cable Assembly
F-8
www.idealindustries.com
Description
Cat. No.
Kit in soft black pouch
33-854
Kit in hard gray case
33-852
Kit on blister card
62-188
1-800-435-0705 for Customer Service
DataComm Equipment
Modular Adapters
■ Reverse-wired adapters for easy testing of circuits without service interruption, straight-through wiring for Data8™
■ Label identifies individual conductors and pins defined with number, color and polarity identifications
■ Large perforated test pads
Smart6™ Modular Tester
Testers
Tele4™ Modular Adapter
LED
indicators
for polarity
High
performance
jack
■ 6-Position tester
High
performance
jack
Push button
for tip/ring test
■ 4-Position adapter
■ High-performance jacks
■ Incoming call identification
Description
Smart6™ Modular Tester
Cat. No.
Description
Cat. No.
62-096
Tele4™ Modular Adapter
62-094
Data8™ Modular Adapter
■ 8-Position adapter
■ High performance jacks
■ Internal circuit design to reduce attenuation, coupling, NEXT
Description
Cat. No.
Data8™ Modular Adapter
62-098
1-800-435-0705 for Customer Service
www.idealindustries.com
F-9
Series 6
Craft TestSets
Used by installers, repair technicians and other
telecommunications personnel for the installation
and testing of telephone services.
■
■
■
Testers
■
■
■
Battery-powered amplified speaker for both Talk
and Monitor Modes
3 pre-programmed, one-touch numbers
10 additional memory locations, two-touch numbers
Moisture-resistant case
Recessed keypad prevents keypad damage and
accidental button contact
Lightweight, slim-profile design provides easy
transportation and storage
Description
Cat. No.
Craft TestSet, Model 630
62-415
Craft TestSet, Model 620
62-411
Craft TestSet, Model 610
62-410
Model 4
Replacement Cords
Description
Cat. No.
Leads w/Bed of Nails
62-425
Leads w/out Bed of Nails
62-427
Mod-to-Mod Cable Set
62-431
Description
Cat. No.
346 Cord
62-433
Craft TestSet, Model 4
62-400
Craft TestSet Selection Guide
62-415
Model
630
Features
62-411
Model
620
62-410
Model
610
62-400
Model
4
SIGNAL SHIELD™ – digital/data signal alarm
•
DSL circuit protection
•
•
Duplex speakerphone in Talk Mode – battery powered
•
•
Amplified speaker in Talk Mode – battery powered
•
•
•
Amplified speaker in Monitor Mode – battery powered
•
•
•
Automatic timed speakers turn-off
•
•
•
“One Touch” memory dialing – 3 locations
•
•
•
Repertory memory dialing – 10 locations
•
•
•
“Safe for Data“ Monitor Mode
•
•
•
•
Monitor impedance >120K Ohms
•
•
•
•
Craft grade
•
•
•
•
Passed 12 ft. and 20 ft. drop tests
•
•
•
•
Ringer for incoming calls
•
•
•
•
Tone and pulse dialing
•
•
•
•
Last number redial – T/P
•
•
•
•
Line polarity indication
•
•
•
•
PBX pause feature
•
•
•
Register recall/hook flash
•
•
•
•
Mute for microphone
•
•
•
•
Over-voltage/over-current protection
•
•
•
•
Moisture resistant
•
•
•
•
Non-slip rubber shoulder pad
•
•
•
•
Field changeable cordset
•
•
•
•
Belt clip
Extra Large
Extra Large
Extra Large
Standard
Warranty
1 Year
1 Year
1 Year
1 Year
Amplified speaker in Talk Mode – line powered
F-10
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm Equipment
Punch Down Tools
Ratchet Telemaster™
Punchmaster™ II
Turn-Lock™ Tool
New cushion-grip
handles
■ Ratchet version of popular Telemaster™ Tool for RJ-45 and
RJ-11 modular plugs
35-407
110/66 Blade
■ Repeatable crimp action for consistent, high quality connections
Description
Cat. No.
Ratchet Telemaster™
30-696
Tools
Non-Impact Turn-Lock™ Tool
NEW
■ For paired conductors
■ For paired conductors
■ Insert and cut cable terminations effortlessly
■ Impact-absorbing cushioned grip reduces operator stress for high
volume installers
■ Adjustable high/low actuation setting accommodates termination
requirements for operator preference
Telemaster™
Telephone Tool
■ Storage compartment with unique locking device provides
convenient storage for spare blades
■ Punchmaster™ II and Non-Impact Tool have Turn-Lock™
Style blade holding design
Punchmaster™ II Turn-Lock™ Tools
Description
Tool
Cat. No.
Repl. Blade
Cat. No.
Punchmaster™ II Punch Down Tool Body only
35-483
—
Punchmaster™ II Punch Down Tool
w/110 Blade
35-485
35-495
Punchmaster™ II Punch Down Tool
w/66 Blade
35-487
35-497
—
35-407
110/66 Cut Blade only
■ For paired conductors
Krone Blade only
—
35-478
Bix® Blade only
—
35-479
35-490
—
®
■ Multi-function telephone tool cuts, strips and crimps for easy
one-tool application
■ Steel frame for long-term durability. (Crimps primary modular
plug strain relief only)
Kit
Cat. No.
Tool Only
Cat. No.
33-700*
30-496
Tool for RJ-45 (4 pair) and
DECconnect MMJ (RJ-11, 3 pair)
N/A
30-497
Tool for RJ-11 (1, 2, 3 pair)
and DECconnect MMJ (RJ-11, 3 pair)
N/A
30-498
Tool for RJ-22 (handset)
and RJ-11 (1, 2, 3 pair)
N/A
30-499
Replacement Cut and Strip Blade Set
for Telemaster™
N/A
LB-1747
Description
Tool for RJ-11 (1, 2, 3 pair)
and RJ-45 (4 pair) Plugs
Punch Down Tool Pouch only (fits all tools)
Bix is a registered trademark of Nortel. Krone is a registered trademark of Krone, Inc.
®
®
Non-Impact Turn-Lock™ Style
Description
Tool
Cat. No.
Repl. Blade
Cat. No.
Body only
35-491
—
Tool w/110 Blade
35-492
35-495
Tool w/66 Blade
35-493
35-497
*Kit includes 10 modular plugs each (85-351, 85-352, 85-353)
DataComm Equipment
F-11
Lever™ -Snips Electrician’s Scissors
with Stripping Notches
Data T®-Cutter
NEW
■ Ergonomic design gives added leverage
■ Spring-action, mechanical advantage increases stripping leverage
and reduces operator fatigue
■ Double plated for added rust protection
Tools
■ Extra-deep serrations grips wire better
■ Cuts round communication cable and maintains cable geometry
for better cable performance
■ Cuts multi-pair cable up to .500 in. (12.7mm) and coaxial cable
up to RG-9/U
Description
Cat. No.
Electrician’s Scissors with Stripping Notches
35-087
Cable Splicing Kit
■ Suitable for soft cables (not ACSR)
■ Steel reinforced center conductors can be trimmed with bolt
cutting holes
35-093
■ Locking latch keeps tool closed in pouch
■ Data T -Cutter II designed for RG-58 and RG-6 coaxial cable
®
Description
Cat. No.
Data T®-Cutter
45-074
Data T®-Cutter II
45-075
Description
Cat. No.
Cable Splicing Kit (Scissors, Splicing Knife, Leather Holder)
Leather Scissors and Knife Holder Only
35-093
35-094
Electrician’s Scissors
35-090
Holder
Only
Economy Round Cable
and Wire Cutter
35-088
35-089
■ Designed for use in telephone and electrical service applications
■ Cuts multiconductor cable
up to .500 in.
(12.7mm) and
solid or stranded wire up to #8 AWG (10mm2)
■ Cut up to 16 gauge solid and 12 gauge stranded wire
■ Serrated surface on back blade edge cleans wire
■ Electrician’s Scissors with stripping notches strip
19 and 23 gauge wire
■ Built-in return spring, locking latch
■ Stamped, hardened steel frame with curved cutting blades
Description
Cat. No.
Multi Conductor Cable to .500 in. (12.7mm)
Solid or Stranded
35-051
Description
Cat. No.
Electrician’s Scissors w/stripping notches
Electrician’s Scissors
Leather Scissors Holder Only
35-088
35-089
35-090
Center Conductor Cutter
Cable Splicing Knife
■ Trims coax center conductor
to 3/16 in. (4.8mm) length for
proper installation into a
dual crimp coax
connector
■ High carbon steel blade remains sharp
and cuts easily through many
insulation types
■ Comfortable, full size, no slip handle
Description
Cat. No.
Center Conductor Cutter
35-060
F-12
www.idealindustries.com
35-091
for easy use
Description
Cat. No.
Cable Splicing Knife and Leather Holder
Leather Knife Holder Only
35-091
35-092
1-800-435-0705 for Customer Service
DataComm Equipment
Coax Stripmaster® Wire Strippers
UTP/STP/Coaxial Cable Strippers
■ Spring-action operation grips and strips in
one motion
■ Knife-type blades feature multiple hole
diameters sized for two step removal of
outer jacket insulation and center
conductor
Coax Cable
Type (RGU)
Repl. Blade
Cat. No.
Cat. No.
Coax Stripmaster® for RG-6
RG-6
LB-740
45-262
Coax Stripmaster for RG-59
RG-59
LB-743
45-265
RG-6
QuadShield
LA-3953
45-282
Description
®
Coax Stripmaster for RG-6 QuadShield
®
■ Lightweight, compact, cost-effective stripper is simple to operate
■ Adjustable blades can be set for any depth to help ensure
nick-free strips
■ Use with twisted-pair wire, tightly wrapped stranded cables,
CATV cable, CB antenna cable, SO, SJ, SJT, and other types
of flexible power cords
■ Includes three straight and one round blade
Typical
RG Cables
Cat. No.
Coaxial Cable Stripper, .
up to 1/8 in. (3.2mm) O.D
RG-174,
RG-187
45-162
(Gray)
Coaxial Cable Stripper,
1/8 in. (3.2mm) to 7/32 in.
(5.556mm) O.D.
RG-58,CB
Antenna
Cable
45-163
(Blue)
Coaxial Cable Stripper, 1/4 in. (6.4mm) to
9/16 in. (14.3mm) O.D.
RG-8
45-164
(Blue)
Cable Stripper, 3/16 in. (4.8mm) to 5/16 in.
(8mm) O.D.
RG-59,
UTP Cable
45-165
(Black)
__
L-9225
Description
Cyclops®
Data Cable Stripper
■ Fast, easy removal of outer sheath
insulations (PVC and Plenum types)
from all Unshielded Twisted Pair (UTP), Shielded Twisted Pair
(STP) and multicore cables up to .433 in. (11mm) in diameter
Description
Data Cable Stripper for unshielded and shielded twisted pair cable
Cat. No.
45-514
Replacement Blade Set* for 45-162,
45-163, 45-165
__
Replacement Blade Set* for 45-164
L-9226
*A set of blades consists of three straight blades and one round blade.
Toggle® Coax Stripper
Coax Strippers
■ Toggle® Tools for stripping
Ethernet, Thinnet, RG-62 or RG-59
coax cable and other cable sizes
■ Specific adjustments
needed for each cable
size.
■ Each tool does 2 or 3-step strips
with no adjustment
Description
Coax Stripper for RG-58
Coax Stripper for Belden® 8281®
Coax Stripper for RG-8/11U
Coax Stripper for RG-174
Coax Stripper for RG-6
Coax Stripper for RG-59
Cat. No.
45-508
45-509
45-510
45-512
45-513
45-517
Replacement
Cassette
Description
Coax Stripper - 3 Step
• For crimp BNC and TNC conn.
• Strips braid 0.240 in. or 6mm and
Dielectric 0.240 in. or 6mm
45-522
(Black)
Coax Stripper - 3 Step
• For dual crimp BNC/TNC and Thinnet BNC conn.
• For 735A Belden® cable
• Strips braid 0.328 in. or 8.2mm and
dielectric 0.109 in. or 2.7mm
45-520
45-521
Coax Stripper - 2 Step
• For F-Type, many single crimp BNC/TNC's,
Twist-on BNC/TNC's, Twinax and UHF conn.
• Strips 0.250 in. or 6.35mm
45-524
(Blue)
45-526
Coax Stripper - 2 Step
• For most Twinax and UHF conn.
• Strips 0.480 in. or 12mm
45-525
(Green)
45-527
Coax Stripper - 3 Step
• For dual crimp N-Series Ethernet conn.
• Strips braid 0.240 in. or 6mm and
Dielectric 0.240 in. or 6mm
1-800-435-0705 for Customer Service
45-523
(Brown)
Cat. No.
—
www.idealindustries.com
45-528
F-13
Tools
reaatt
Gre
rkss G
ork
Wo
W
pee
Typ
T Ty
T
A
A
C
C
n
n
o
o
g
ng
lin
bli
Caab
C
■ Speeds two step cable stripping
Round Cable Slitting
and Ringing Tool
Coax Strip and Crimp Tool
■ Cuts around cable jacket as
well as slits the length of
jacket for easy removal
■ Use with single or multiple conductor cable up to 1.75 in. O.D.
■ Blade adjusts for jacket thicknesses up to .125 in.
■ Precision, form-ground stripping holes remove outer jacket and
insulation from RG-59 and RG-6 coaxial cable
■ Spare blade in handle base
Tools
■ Durable blades cut copper-coated steel conductors
Description
Cat. No.
Round Cable Slitting and Ringing Tool
45-144
Cable Stripper for 1/4 in. to 3/4 in. O.D.
45-128
Replacement Blades for 45-144 (2/pkg.)
LB-1748
Description
Cat. No.
Replacement Blades for 45-128 (2/pkg.)
L-7486
Coax Strip & Crimp Tool
30-433
■ Three crimping nests for crimping F-connectors and ring terminals
■ Cushioned, comfort-grip handles
Crimpmaster™ Crimp Tool & Die Sets
Dies change quickly and easily
with a screwdriver.
Interchangeable dies provide
versatility in a single tool
Coaxial Termination
Crimp release provides
operator safety
Ratchet crimp action
provides repeatable and
reliable terminations
New cushion-grip
handles
Pressure adjustment
for actuation force
High quality ratchet-type crimp tool for electricians, contractors and
installers who require guaranteed repeatability of good mechanical
and electrical connections.
Paired Conductor Termination
Description
Tool
Cat. No.
Replacement
Die Set
Cat. No.
Crimpmaster™ Crimp Tool Frame
30-506
—
RJ-11 Two, four, and six-position Crimp
Tool for AMP RJ-11 modular plugs
30-520
30-562
RJ-45 Eight-position Crimp Tool
for AMP RJ-45 modular plugs
30-521
30-560
RJ-45 Eight-position Crimp Tool
for keyed or non-keyed modular plugs
30-522
30-559
RJ-45 Ten-position Crimp Tool
30-523
30-561
RJ-11 Crimp Tool for two, four or
six-position modular plugs
30-524
30-556
RJ-11 Crimp Tool for DEC MMJ
six-position modular plugs with an
off-set release tab
30-525
30-558
Crimpmaster™ Handset Die for
four-position handset modular plugs
30-526
30-565
F-14
www.idealindustries.com
Description
22-10 AWG (.324mm2 - 5.261mm2)
fully insulated slide-on connectors
Large gauge sound cable
Insulated Terminal Crimp Tool
with built-in locator
22-12 AWG (.324mm2 - 3.31mm2)
Non-insulated open barrel
crimp style connectors
RG-58, 59, 62 Non-plenum Cambridge
BNC/TNC connectors
RG-8/11, RG-213, RG-216 Ethernet Thickwire,
N-Series type plugs and jacks
RG-9, Belden® 8281® and RG-6 Cable,
50 & 75 Ohm
RG-58 and RG-174 cable for 50 and
75 Ohm cables
RG-174 Mini-59 Hex BNC/TNC
coax connector
RG-58 and RG-59 Plenum cables,
Thinwire PVC Hex
16-26 AWG (1.31mm2 - 1.28mm2)
Miniature insulated rings and splices
AMP DEC RG-58 Thinwire connectors
SMA or SFR-Type fiber optic connectors
22-10 AWG (.324mm2 - 5.261mm2)
Insulated ring tongue terminals and splices
22-8 AWG (.3mm2 - 8mm2)
Non-insulated terminals and splices
RG-58 RG-59/62AU BNC/TNC
3-Piece Hex type connectors
CATV RG-59 and RG-6
Captive Ring F-connectors
SMA or SFR-Type Hex fiber optic connectors
Tool
Cat. No.
Replacement
Die Set
Cat. No.
30-477
30-594
30-478
—
30-479
—
30-480
30-586
30-481
30-573
30-482
30-577
30-483
30-578
30-484
30-587
30-485
30-576
30-486
30-591
30-487
30-572
30-488
30-490
30-588
30-597
30-500
30-579
30-501
30-580
30-502
30-581
30-503
30-582
30-489
30-596
1-800-435-0705 for Customer Service
DataComm Equipment
RJ-45/11 Two, Four, Six and Eight-Position
Combination TelCom Termination Kit
UniSeal™ Compression Tool
NEW
connectors on coaxial cable
■ Fast and reliable solution to home theater, CATV, satellite systems
and security applications
■ Permanent connection so your connector never comes loose
■ Universal design works with most compression connectors
Description
Cat. No.
UniSeal™ Compression Tool
30-603
Kit 33-704 Includes:
Description
Qty.
Cat. No
Telemaster™ for RJ-11/RJ-45 Plugs
1
30-496
4-Position, RJ-11 Stranded Modular Plugs
15
85-351
6-Position, RJ-11 Stranded Modular Plugs
15
85-352
8-Position, RJ-45 Stranded Modular Plugs
15
85-353
Qty.
1
1
50
Cat. No
45-165
30-496
85-346
Qty.
1
1
1
1
200
Cat. No
45-074
45-165
30-506
30-559
86-396
Economy 10Base-T Kit
Compression F-Connectors
■ Approved for use by most cable TV
and satellite companies
■ RF signal containment
ensures strong signal
■ Permanent connections do
not pull off or come loose
Kit 33-750 Includes:
■ Provides superior durability in all climates
compared to other manufacturers’ connectors
NEW
■ One-piece design for quick installation
■ Compression port seal provides a
water-tight seal for outdoor applications
Description
Qty.
Cat. No.
RG-6 Compression F-connector
50
89-055
RG-6 Compression F-connector
100
89-105
RG-6 Quad Compression F-connector
50
89-056
RG-6 Quad Compression F-connector
100
89-106
RG-59 Compression F-connector
50
89-054
RG-59 Compression F-connector
100
89-104
Compression F-ConnectorPort Seal
NEW
■ For use with IDEAL RG6,
RG-6 Quad and RG-59
F-Style compression
connectors to make
connections water tight.
Description
Port Seal
1-800-435-0705 for Customer Service
Qty.
Cat. No.
5
89-026
Description
UTP/Coax Stripper
Telemaster™ RJ-11/RJ-45 Tool
8-Position RJ-45 Non-keyed Solid Plugs
Crimpmaster™ 10Base-T
RJ-45 Crimping Kit
Kit 33-652 Includes:
Description
Data T®-Cutter
UTP/Coax Stripper
Crimpmaster™ Frame only
8-Position Die Set for RJ-45 Plugs
8-Position RJ-45 Non-Keyed Solid Plugs
www.idealindustries.com
F-15
Tools
■ Connects RG-6, RG-6 Quad Shield and RG-59 compression
Residential Kit
Cable Service Kit
33-905
33-605
Kit 33-905 Includes:
Description
Kits
Qty.
Cat. No
Data T®-Cutter
1
45-074
UTP Stripper
1
45-165
Punchmaster™ w/110 Blade
1
35-485
Crimpmaster™ RJ-45
1
30-522
CATV Die Set
Stripmaster® RG-6
1
1
30-582
45-262
RG-6 Quad Shield Stripmaster Blade
1
LA-3953
F-Connector Tool
1
35-046
Journeyman’s Pouch
1
35-462
®
Kit 33-605 Includes:
Description
Qty.
Cat. No
Punchmaster™ w/110 Blade
1
35-485
66 Blade Only
1
35-497
Electrician’s Scissors w/Stripping Notches
1
35-088
UTP/STP Stripper
1
45-165
5-in-1 Screwdriver
1
35-905
Probe Pic & Spudger
1
35-473
Tone Generator
1
62-160
Amplifier Probe
1
62-164
Journeyman’s Electrician’s Tote
1
35-462
Deluxe Cable Service Kit
Pro Residential Kit
33-925
33-705
Kit 33-925 Includes:
Description
Qty.
Cat. No
Journeyman’s Pouch
1
35-462
Punchmaster™
1
35-483
110/66 Blade
1
35-407
UTP Stripper
1
45-165
Description
Qty.
Cat. No
5-in-1 Screwdriver
1
35-905
Punchmaster™ w/110 Blade
1
35-485
Probe Pic
1
35-473
66 Blade Only
1
35-497
Lever™-Snips
1
35-087
Electrician’s Scissors w/Stripping Notches
1
35-088
Data T®-Cutter
1
45-074
UTP/STP Stripper
1
45-165
1
45-524
5-in-1 Screwdriver
1
35-905
F-Connector Tool
1
35-046
Probe Pic & Spudger
1
35-473
Tone Generator
1
62-160
Tone Generator
1
62-160
62-164
Amplifier Probe
1
62-164
Journeyman’s Electrician’s Tote
1
35-462
Telemaster™ Tool
1
30-496
LinkMaster™ Tester and Remote
1
62-200
Coax Stripper
Amplifier
1
CATV Crimpmaster™
RJ-45 Die Set
F-16
www.idealindustries.com
1
1
30-503
30-559
Kit 33-705 Includes:
1-800-435-0705 for Customer Service
DataComm Equipment
Crimpmaster™ F-Type
(CATV) Connectors Kits
Twisted Pair/Coax
Termination Kit
33-400
Description
Kit 33-869 Includes:
Description
Data T®-Cutter
Scissors w/stripping notch
Center Conductor Cutter
UTP/Coax Stripper
Coax Stripper w/black cassette
Crimpmaster™ Frame only
2,4,6-Position Die Set for RJ-11 Plugs
8-Position Die Set for RJ-45 Plugs
RG-58/59/62 BNC Die Set
Punchmaster™ II w/110 Blade
Punchmaster™ II 66 Blade only
ABS™ Signal Thrower™
ABS™ Tester
ZipKit™ Carrying Case
Qty.
Cat. No
Crimpmaster CATV
1
30-503
F-Connector, Crimp-on RG-59 Plug
20
85-016
F-Connector, Crimp-on RG-6 Plug
20
85-017
™
Qty.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Cat. No
45-074
35-088
35-060
45-165
45-520
30-506
30-556
30-559
30-581
35-485
35-497
62-184
62-180
35-419
RG-6 Crimpmaster™ F-Type
Connector Kit
NEW
Kit 33-404 Includes:
Description
Qty.
Cat. No
1
30-503
F-Connector, Crimp-on RG-6
20
85-017
F-Connector, Crimp-on RG-6 Quad Shield
20
85-057
CATV Crimpmaster™
Twist-On
F-Connector Kit
Twisted Pair/Coax Termination Kit
Kit 33-401 Includes:
Description
Qty.
Cat. No
Coax Stripper w/blue cassette
1
45-526
F-Connector, Twist-on RG-59 Plug
20
85-015
Technician’s
Service Kit
Kit 33-806 Includes:
Description
Tele T®-Stripper
Data T®-Cutter
UTP/Coax Stripper
Coax Cable Stripper w/black cassette
Coax Stripper w/red cassette
Replacement Cassette, brown
Crimpmaster™ Frame only
RG-8/11 Ethernet Die Set
Thinnet BNC Die Set
RG-58/59/62 BNC Die Set
2,4,6-Position Die Set for RJ-11 Plugs
8-Position Die Set for RJ-45 Plugs
6-Position DEC MMJ Die Set for RJ-11 Plugs
8-Position Die Set for RJ-45, AMP Plugs
Punchmaster™ II Punch Down Tool w/66 Blade
Punchmaster™ II 110 Blade only
1-800-435-0705 for Customer Service
Qty.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Cat. No
45-076
45-074
45-165
45-520
45-528
45-523
30-506
30-577
30-588
30-581
30-556
30-559
30-558
30-560
35-487
35-495
Now
includes
5-in-1
Screwdriver
Kit 33-505 Includes:
Description
Punchmaster™ II Punch Down Tool w/110 Blade
Punchmaster™ II 66 Blade only
Electrician’s Scissors w/stripping notch
UTP/STP Stripper
5-in-1 Screwdriver
Probe Pick and Spudger
Nylon case
Qty.
1
1
1
1
1
1
1
Cat. No
35-485
35-497
35-088
45-165
35-905
35-473
62-205
www.idealindustries.com
F-17
Kits
Kit 33-400 Includes:
Deluxe Crimpmaster™
Coaxial Crimping Kit
Crimpmaster™ CATV F-Connector
Termination Kit
Kits
Kit 33-201 Includes:
Description
Kit 33-402 Includes:
Description
Qty.
Cat. No
Qty.
Cat. No
Coax Stripper w/black cassette
1
45-520
Coax Stripper w/blue cassette
1
45-526
Replacement Cassette, brown
1
45-523
Crimpmaster™ for RG-59/62
CATV F-Connectors
1
30-503
Crimpmaster™ Frame only
1
30-506
RG-8/11 Ethernet Die Set
1
30-577
F-Series, Crimp-on RG-59 Plugs
20
85-016
RG-59/8281 BNC Die Set
1
30-578
F-Series, Crimp-on RG-6 Plugs
20
85-017
RG-58, RG-59/62 BNC Die Set
1
30-581
RG-58/174 BNC Die Set
1
30-587
Thinwire BNC Die Set
1
30-588
RG-58/59 Plenum Die Set
1
30-591
RG-6 Crimpmaster™ F-Type
Connector Termination Kit
Cable Service/Termination Kit
Kit 33-406 Includes:
Description
Qty.
Cat. No
CATV Crimpmaster™
1
30-503
F-Connector, Crimp-on RG-6
20
85-017
F-Connector, Crimp-on RG-6 Quad Shield
20
85-057
Coax Stripper with Blue Cassette
1
45-526
F-Connector Tool
1
35-046
Mechanic’s Bag
1
35-535
F-18
www.idealindustries.com
Kit 33-861 Includes:
Description
Qty.
Cat. No
Data T®-Cutter
1
45-074
Center Conductor Cutter
1
35-060
UTP/Coax Stripper
1
45-165
Coax Stripper w/black cassette
1
45-520
Crimpmaster™ RG-58/59 Tool
1
30-502
2,4,6-Position Die Set for RJ-11 Plugs
1
30-556
8-Position Die Set for RJ-45 Plugs
1
30-559
Punchmaster™ II Punch Down Tool w/66 Blade
1
35-487
Punchmaster™ II 110 Blade only
1
35-495
ABS™ Signal Thrower™
1
62-184
ABS™ Tester
1
62-180
LinkMaster™ Tester w/Remote
1
62-200
Cable Assemblies
1
K-7921
1-800-435-0705 for Customer Service
DataComm Equipment
Wall Plates
85-205
85-218
85-220
85-239
85-232
85-237
Telephone Wall Plates are listed and approved by the Underwriter’s
Laboratories and contain 50 micro inches of gold plating on the
contacts.
Telephone Wall Plates - Standard Size
Description
Color
Ivory
RJ-11, 2 Pair
White
Almond
Dual RJ-11, 2 Pair
Ivory
White
Ivory
RJ-11, 3 Pair
White
Almond
Dual RJ-11, 3 Pair
Ivory
White
Ivory
RJ-45, 4 Pair
White
Almond
Dual RJ-45, 4 Pair
Ivory
White
RJ-11, 2 Pair
Wall Mount Plate
Ivory
White
Almond
Ivory
CATV Coax
White
Almond
Ivory
Dual CATV Coax
White
Almond
Ivory
Combo CATV/RJ-11
White
Almond
1-800-435-0705 for Customer Service
Telephone Wall Plates — Mid-Size
Qty.
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Cat. No.
85-206
86-206
85-207
86-207
85-223
86-223
85-208
86-208
85-209
86-209
85-210
86-210
85-211
86-211
85-225
86-225
85-212
86-212
85-213
86-213
85-214
86-214
85-215
86-215
85-227
86-227
85-216
86-216
85-217
86-217
85-218
86-218
85-219
86-219
85-229
86-229
85-200
86-200
85-201
86-201
85-220
86-220
85-202
86-202
85-203
86-203
85-221
86-221
85-204
86-204
85-205
86-205
85-222
86-222
Description
Color
Ivory
RJ-11, 2 Pair
White
Almond
Ivory
Combo CATV/RJ11
White
Almond
Ivory
CATV Coax
White
Almond
Ivory
Dual CATV Coax
White
Almond
Qty.
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Card of 1
Box of 100
Cat. No.
85-242
86-242
85-237
86-237
85-233
86-233
85-241
86-241
85-236
86-236
85-232
86-232
85-239
86-239
85-234
86-234
85-230
86-230
85-240
86-240
85-235
86-235
85-231
86-231
Surface Jack
For initial installations where cable cannot be pulled through wall,
or for replacement of modular four-prong jacks.
Surface Jacks
Description
Color
RJ-11, 2 Pair
RJ-11, 2 Pair
RJ-11, 2 Pair
White
Ivory
Almond
Qty.
Cat. No.
Card of 1
Card of 1
Card of 1
85-244
85-245
85-246
www.idealindustries.com
F-19
Wall Plates
Wall Plates
Patch Cables
TelCom Modular Plugs
Connectors and Patch Cables
85-394
85-396
85-403
■ 350 MHz UTP Patch Cables provide quick and easy
interconnection for system additions, moves or changes
■ Slim, contoured boots provide strain relief and save space
on over-crowded patch panels
■ Snagless modular connectors
■ Terminated to 568B wiring and color code configurations,
with 24 AWG stranded copper conductors
■ Five colors and six lengths for installation versatility
Description
Gray
Cat. No.
Blue
Cat. No.
Black
Cat. No.
Yellow
Cat. No.
Red
Cat. No.
3 ft. (1m)
85-731
85-737
85-743
85-749
85-755
5 ft. (1.5m)
85-732
85-738
85-744
85-750
85-756
7 ft. (2.1m)
85-733
85-739
85-745
85-751
10 ft. (3m)
85-734
85-740
85-746
85-752
■ All plugs comply with FCC 68 guidelines and are UL Listed
■ Plugs are capable of supporting the latest EIA/TIA cable system
performance categories when installed in compliance with
appropriate EIA/TIA standards and methods
■ Plugs offered for round cable with solid conductors and
for flat cable and stranded conductors
■ Position and contact configurations cover popular styles
Description
Qty.
25
85-351
50
85-401
85-757
100
86-401
85-758
25
85-352
50
85-402
100
86-402
15 ft. (4.5m)
85-735
85-741
85-747
85-753
85-759
25 ft. (7.6m)
85-736
85-742
85-748
85-754
85-760
6-Position 4-Contact Flat Stranded
6-Position 6-Contact Flat Stranded
6-Position 6-Contact DEC Flat Stranded
Insulation Displacement
Connectors (IDC)
4-Position 4-Contact Flat Stranded (Handset)
8-Position 8-Contact Flat Stranded
8-Position 8-Contact Keyed Flat Stranded
6-Position 4-Contact Round Solid
85-900
85-925
85-950
IDC connectors create fast splice and tap connections on solid
copper wires. Designed for low voltage telecommunication cables.
6-Position 6-Contact Round Solid
■ Moisture-resistant sealant protects wires from corrosion
6-Position 6-Contact DEC Round Solid
■ Use with solid copper single-conductor wire
Description
UB-I, 2-Wire Tap Splice IDC, 22-26 AWG
UR-I, 3-Wire Butt Splice IDC, 19-26 AWG
UY-I, 2-Wire Butt Splice IDC, 22-26 AWG
Kinetic Super™ Wire Stripper/Crimper
See page C-3 for IDC Crimp Tool.
F-20
www.idealindustries.com
Cat. No.
Qty.
Cat. No.
25
85-900
100
25
85-349
50
85-399
100
86-399
25
85-348
50
85-398
100
86-398
25
85-353
50
85-403
100
86-403
25
85-347
50
85-397
100
86-397
25
85-344
50
85-394
100
86-394
25
85-345
50
85-395
100
86-395
25
85-343
50
85-393
100
86-393
25
85-342
50
85-392
86-900
100
86-392
25
85-925
25
85-346
100
86-925
50
85-396
25
85-950
100
86-396
100
86-950
25
85-341
1
45-719
50
85-391
100
86-391
4-Position 4-Contact Round Solid (Handset)
8-Position 8-Contact Round Solid
8-Position 8-Contact Keyed Round Solid
1-800-435-0705 for Customer Service
DataComm Equipment
Splitters
Description
CATV Cable Splitter,
5-900 MHz, 2-Way
F-Series Coaxial Connectors
F-Series Connectors utilize threaded couplings and cable conductors
as contacts for CATV and other UHF applications.
Description
F-Series, Twist-on
Plug, RG-59
F-Series, Crimp
Plug, RG-59
F-Series, Crimp
Plug, RG-6
F-Series, 2-Piece
Crimp Plug, RG-59
F-Series, 2-Piece
Crimp Plug, RG-6
F-Series, Crimp Plug,
RG-59, Quad Shield
F-Series, Crimp Plug,
RG-6, Quad Shield
F-Series, Female
Adapter
F-Series,
Terminator
F-Type, Twist-on
RG-6
F-Type, 1 pc Crimp,
RG-59 Plenum
Quantity
Cat. No.
Card of 10
85-035
Card of 50
85-015
Box of 100
86-015
Card of 10
85-036
Card of 50
85-016
Box of 100
86-016
Card of 10
85-037
Card of 50
85-017
Box of 100
86-017
Card of 50
85-027
CATV Cable Splitter,
5-900 MHz, 3-Way
CATV Cable Splitter,
5-900 MHz, 4-Way
High Performance
Cable Splitter,
5MHz-1GHz 2-Way
High Performance
Cable Splitter,
5MHz-1GHz 3-Way
Quantity
Cat. No.
Card of 1
85-032
Box of 10
86-432
Card of 1
85-033
Box of 10
86-433
Card of 1
85-034
Box of 10
86-434
Card of 1
85-132
Box of 10
86-132
Card of 1
85-133
Box of 10
86-133
Card of 1
85-134
Box of 10
86-134
Box of 200
86-027
Card of 50
85-028
Box of 200
86-028
Card of 10
85-059
Card of 50
85-029
Box of 100
86-029
Card of 10
85-057
Card of 50
85-030
■ Hex socket makes installation and
removal of CATV F-connections easy
Box of 100
86-030
■ Threaded-end holds F-connector during cable insertion to
Card of 10
85-031
High Performance
Cable Splitter,
5MHz-1GHz 4-Way
F-Connector Tool
■ Two tools in one, combines a 7/16 in.
hex socket and 3/8-32threaded end
ease connector seating against dielectric and eliminates chance
of injury from cable center conductor
Box of 100
86-031
Card of 10
85-038
Box of 100
86-038
Description
Cat. No.
Card of 10
85-053
F-Connector Tool
35-046
Card of 50
85-039
Box of 100
86-039
Card of 50
85-040
Box of 100
86-040
Compression F-Connector Port Seal
NEW
For use with IDEAL RG-6, RG-6 Quad
and RG-59 F-style compression
connectors to make connection
water tight.
■ Chrome finish for long life and screwdriver-type plastic handle
for comfort
Compression F-Connectors
■ Approved for use by most cable TV
and satellite companies
■ RF signal containment
ensures strong signal
■ Permanent connections do not pull off or come loose
■ Provides superior durability in all climates
compared to other manufacturers’ connectors
NEW
■ One-piece design for quick installation
■ Compression port seal provides a water-tight seal for outdoor
applications
Description
Description
Compression F-Connector Port Seal
UniSeal™ Compression Tool
Qty.
Cat. No.
5
89-026
30-603
RG-6 Compression F-connector
RG-6 Quad Compression F-connector
RG-59 Compression F-connector
1-800-435-0705 for Customer Service
Qty.
50
Cat. No.
89-055
100
89-105
50
89-056
100
89-106
50
89-054
100
89-104
www.idealindustries.com
F-21
Connectors
For a complete selection of
BNC connectors, see the
IDEAL DataComm Catalog.
MiniLite-Strip™
Optical Fiber Stripper
IMP
Simplex/Duplex 3mm
Jacket Stripper
VED
RO
VE
D
NEW
I M PRO
■ Small strip notch engineered and precision-ground to strip 900
micron or 250 micron buffer coatings from 125 micron fiber
■ Designed to remove the jacket from 3mm Simplex or Duplex (zip
■ Form-ground, knife-type blades for accurate easy stripping without
damaging the fiber or Kevlar® strength member
■ Contoured, comfort-grip handles to reduce operator fatigue
Description
■ Larger round strip notch machined to remove the 3mm outer jacket
■ Strip notches pre-set and locked, no field adjustment necessary
Description
Cat. No.
MiniLite-Strip™ Optical Fiber Stripper
45-352
Cat. No.
Simplex/Duplex 3mm Jacket Stripper
45-349
Note: Kevlar is a registered trademark of DuPont. ST is a registered trademark of AT&T.
®
®
Lite-Strip™
Optical Fiber Stripper
Stripmaster® Ribbon Fiber
Jacket Stripper
45-350
NEW
■ Removes jacket from Ribbon Fiber without
V-notch blades strip a wide range of outer cable jacket. Precisionground, replaceable knife-type blades strip tight buffer tube
insulations (900µm). Also strips mechanically strippable coatings
from 250 microns to 900 microns.
damage to the Kevlar® strength member of
the Ribbon Fiber
Note: Frame and blade-set sold separately.
L-5620
Description
Cat. No.
Stripmaster® Frame only
L-5620
Blade-set for use with Corning Plenum and Riser Ribbon Fiber Cable
LB-1152
Blade-set for use with Corning “Fanout” Ribbon Cable
LB-1153
■ Replaceable precision-ground blades cleanly strip buffer
coatings
■ New funneled hole makes cable insertion easier
■ Improved spring mounting returns handles to original position
after every application
■ One-step, 900 micron stripping hole provides broader
Note: Kevlar® is a registered trademark of DuPont.
stripping range
■ Extra durable to withstand normal drops without requiring
tool realignment
■ New gauge color makes fiber and hole identification easier
VED
RO
VE
D
Serrated Cutter (For Kevlar®))
with Breaker Notch
IMP
Fiber Optic Tools
cord) fiber optic cable
I M PRO
■ Improved comfort-grip handles for an easier, more comfortable
stripping process
Description
Lite-Strip™ Optical
Fiber Stripper (900µm/250µm)
Transparent Wire Stop
■ Two-Step process significantly
increases the life of this rugged tool
Fiber
Sizes
125µm,
140µm
Cat. No.
45-350
LB-070
■ Superior quality high-carbon stainless
steel with molybdenum and vanadium
provides the super-hard edges needed
to stand up to the demands of today’s market
■ Textured cushioned-grip handles
■ Value-priced for contractors, cable assembly houses, fiber
installers/technicians and tool kits
Description
Cat. No.
Serrated Cutter w/Breaker Notch (Patent pending)
45-344
Note: Kevlar® is a registered trademark of DuPont.
F-22
www.idealindustries.com
1-800-435-0705 for Customer Service
DataComm Equipment
Cable Strippers
Plastic Polishing
Fixture
45-162
NEW
■ Universal fitting accepts all ST, SC
and FC connectors with 2.5mm
ferrules
■ Economically priced
■ Precision tool used by manufacturers, contractors and in tool kits
■ Adjustable blades can be set for any depth to help ensure
nick-free strips
■ Use with twisted-pair wire, tightly wrapped stranded cables,
Description
Cat. No.
Plastic Polishing Fixture
45-342
CATV cable, CB antenna cable, SO, SJ, SJT, and other types of
flexible power cords
■ Includes three straight and one round blade
Description
Cat. No.
Cable Stripper,
up to 1/8 in. (3.2 mm) O.D.
45-162
(Gray)
Cable Stripper, 1/8 in. (3.2 mm) to 7/32 in.
(5.556 mm) O.D.
45-163
(Blue)
Replacement Blade Set for 45-162,
45-163, 45-165
L-9225
Stainless Steel Polishing Fixture for
Optical Fiber ST® and
SC Type Connectors
Produces polished fiber optic ST® and SC type connectors for
optimum connector performance.
Split-Tip Fiber Optic Swabs
■ Precision-machined, stainless-steel disk provides accurate
polishing angle for desired end face finish
NEW
■ Stainless-steel hardness maintains long life and resists
uneven wear
■ Stepped surface reduces drag and friction for easier polishing
■ Split-tip design cleans fiber easier
and more efficiently than other methods
Description
■ Tube/handle is pre-loaded with 99% isopropyl alcohol
■ A single swab can be used for many cleanings or until the alcohol
is gone
Cat. No.
1
45-341
Note: ST is a registered trademark of AT&T.
®
Description
Split-Tip Fiber Optic Swabs
Qty.
Cat. No.
20/bag
45-360
DualScribe™ Double-Ended
Fiber Optic Scribes
45-337
■ For optimum connector
polishing results, we
recommend a three-step
procedure using 0.5µm, 3µm
and 12µm 3x6” aluminum oxide
polishing films
■ Color-coded handles for quick,
NEW
45-359
■ Lot-to-lot consistency in our films means repeatable connector
■ 30° single bevel – DualScribe™
45-357
reversible blade doubles tool life
■ Soft non-slip grip provides precise control during scribing
■ Clear safety cap protects the blades from damage when not in use
Handle Color
Cat. No.
Ruby Blade Fiber Optic Scribe
Red
45-357
Sapphire Blade Fiber Optic Scribe
Blue
45-358
Carbide Blade Fiber Optic Scribe
Black
45-359
1-800-435-0705 for Customer Service
45-338
NEW
45-358
to choose from to meet your specific
needs – Ruby, Sapphire, Carbide
Description
Polishing Films for Fiber
Optic Connectors
45-339
■ Three professional quality blade styles
easy identification
Red – Ruby
Blue – Sapphire
Black – Carbide
Polishing Fixture for Optical Fiber
SC/ST® Type Connectors
Quantity
finishes on ceramic, stainless steel, plastic and composite ferrules
■ A single sheet will typically yield 10 to 20 connectors when using
the recommended 3-step procedure
Description
Color
Quantity
Cat. No.
0.5µm, 3” x 6”, Aluminum Oxide
Ivory
20 films/sleeve
45-337
3.0µm, 3” x 6”, Aluminum Oxide
Lt. Yellow
20 films/sleeve
45-338
12µm, 3” x 6”, Aluminum Oxide
Lt. Red
20 films/sleeve
45-339
www.idealindustries.com
F-23
Fiber Optic Tools
■ Grooved face for polishing efficiency
This lightweight, compact stripper is inexpensive and
simple to operate.
Fiber Inspection Microscope
PremierMaster™
Crimp Tools and Die Sets
45-332
28-500
NEW
Fiber Optic Tools
■ 100X magnification for viewing multimode connectors
■ Includes 2.5mm connector “Universal Adapter” for FC, ST and SC
style connectors
■ Oblique illumination provides excellent view of ferrule cleanliness
and core condition
■ Rugged, rubberized metal housing, precision glass optics and a
built-in laser safety filter
■ White LED illumination delivers 100,000 hours bulb life
■ Soft padded carrying case included
■ Battery life 48+ hours
■ Compact size 7.5” x 1.96” x 1.18”
■ Optional 200X Conversion Eyepiece threads on for viewing finish/
polish of singlemode connectorsD
Description
Cat. No.
Fiber Inspection Microscope
45-332
1.25mm Connector Adapter
45-334
MTRJ-Style Connector Adapter
45-335
200X Conversion Eyepiece for Singlemode Connectors
45-336
Fiber Optic Crimp Die Sets were developed to be used in
IDEAL PremierMaster™ Series Crimp Frame.
Tool
Cat. No.
Repl. Die Set
Cat. No.
PremierMaster™ Crimp Tool
Frame Only
28-500
—
AT&T/ST or SMA Fiber Optic conn.
Hex 0.190 (4.83 mm), 0.090 (2.29 mm)
Round, 0.105 (2.67 mm)
28-301
28-401
Amphenol SMA Fiber Optic Conn.
Hex 0.213 (5.54 mm), 0.178 (4.52 mm)
—
28-402
Amphenol SMA Fiber Optic conn.
Hex 0.218 (5.54 mm), 0.151 (3.84 mm)
—
28-403
3M/ST Fiber Optic conn.
Hex 0.153 (3.88 mm)
28-304
28-404
Fiber Optic conn. Hex 0.151 (3.84 mm),
0.178 (4.52 mm), 0.213 (5.41 mm)
28-305
28-405
Description
Note: PremierMaster™ Die Sets not interchangeable with Crimpmaster™ frames.
Crimpmaster™
Fiber Optic Crimp Tools
VFF5 Visual Fault Finder
30-489
NEW
Laser light source used to locate breaks, faulty splices and crimps
■ NEW 2.5mm Universal Adapter for all ST, SC and FC connectors
■ Useful over a distance of 5km (3miles)
Cat. No. 30-489 Fiber Optic Crimp Tool for SMA hex connectors.
Triple hex cavity die for crimp dimensions of .151 (3.84 mm), .178
(4.52 mm) and .213(5.41 mm).
■ Two AA batteries provide over 30 hours of continuous use
■ Slim, pocket-sized tool in rugged metal housing
■ Nylon carrying case with belt loop included.
Description
Cat. No.
Visual Fault Finder
Note: ST® is a registered trademark of AT&T.
F-24
www.idealindustries.com
Cat. No. 30-4910 AMP-Optimate Fiber Optic Crimp Tool for SMA
connectors. A triple cavity 360 degrees round die is incorporated
in this tool for crimp dimensions of .195 (4.95 mm), .165 (4.19
mm) and .138 (3.51 mm).
VFF5
Description
Cat. No.
Crimpmaster™ for SMA Hex Connectors
30-489
Replacement Die Set
30-596
Crimpmaster™ for SMA Connectors and AMP Optimate
30-490
Replacement Die Set for AMP-Optimate-SMA
30-597
1-800-435-0705 for Customer Service
Supplies
G
Standard and Heavy-Duty Toggle
Switches
Medium and Light-Duty Toggle Switches
■ Great for household
appliances and equipment
■ Great for power tool
and motor control
switch applications
■ Bat toggle switch, 774007 is
ideal for battery-powered
equipment including
trimmers and lawn mowers
■ Rugged long wearing
solid brass/nickel plated
bushings
■ 1/2 in. diameter mounting
hole
Toggle Switches
■ 1/2 in. diameter
mounting hole
Description
Poles
Circuitry
Temination
Cat. No.
Description
Poles
Circuitry
Temination
Cat. No.
Toggle Switch with
on-off faceplate
SPST
On-Off
Screw
774011*
Bat Toggle with
On-Off Faceplate
SPST
On-Off
Screw
774017*
Toggle Switch
SPST
On-Off
“O” Ring & Screw
774010*
SPST
On-Off
Wire Leads
774018**
Toggle Switch
SPST
On-Off
Spade
774008*
Bat Toggle with
On-Off Faceplate
Toggle Switch
SPDT
On-On
Screw
774012*
Bat Toggle
SPST
On-Ground-Off
Spade
774007***
Short Ball Toggle Switch
SPST
On-Off
Screw
774001*
Short Ball Toggle Switch
SPST
On-Off
Wire Leads
774002*
Toggle Switch
SPDT
On-Off-On
Screw
774013*
Toggle Switch
SPDT
On-Off-On
Spade
774027*
Toggle Switch
SPDT
(On)-Off-(On)
Screw
774009*
Heavy-Duty Toggle Switch
DPST
Heavy-Duty Toggle Switch
DPST
On-Off
Screw
774014**
On-Off
Spade
Heavy-Duty Toggle Switch
774005**
DPDT
On-On
Screw
774015**
Heavy-Duty Toggle Switch
DPDT
On-Off-On
Screw
774016**
Heavy-Duty Toggle Switch
DPDT
On-Off-On
Spade
774003**
Heavy-Duty Toggle Switch
DPDT
(On)-Off-(On)
Screw
774000**
* 3/4 HP 125-277V AC, 10 Amp/277V AC, 20 Amp/125V AC
** 1-1/2 HP 125-277V AC, 10 Amp/277V AC, 20 Amp/125V AC
* 3 Amp/250V AC, 6 Amp/125V AC
** 1/3 HP 125V AC, 4 Amp/250V, 8 Amp/125V, 10 Amp/125V AC
*** For DC voltage
Toggle Switch Covers
■ Great for outdoor and
other environmentally
tough conditions
■ Rubber cover screws
onto toggle switches to
protect switches from
moisture, dust and dirt
Double Insulated Plastic Toggle Switches
Description
■ Great for outdoor,
marine and automotive
applications
Toggle Switch Cover
■ Double insulated for
moisture protection
Slide Switch
■ 1/2 in. diameter
mounting hole
■ The right switch for
household appliances
Description
Poles
Circuitry
Temination
Cat. No.
Double Insulated, Plastic
Toggle Switch
SPST
On-Off
Screw
774019*
Double Insulated, Plastic
Toggle Switch
SPDT
(On)-Off-(On)
Spade
774004*
Double Insulated, Plastic
Toggle Switch
DPDT
(On)-Off-(On)
Spade
774006*
* 10 Amp/277V AC, 20 Amp/125V AC
Qty.
Cat. No.
2
774020
■ Fits standard
9/16 in. x 7/8 in.
opening
Description
Poles
Circuitry
Termination
Cat. No.
Slide Switch
SPST
On-Off
Solder Terminals
774051*
*10 Amp/125V AC, 5 Amp/250V AC
G-2
www.idealindustries.com
1-800-435-0705 for Customer Service
Supplies
Push-Button Switches
Pull Chain Switches
■ Push-on, Push-off Push
Button Switches are
great for household
appliances, lamps and
motor controls
■ Use for ceiling fixtures,
lamps and fans
■ 13/32 in. diameter
mounting hole
Description
Color Poles
Pull Chain
Nickel
Plated
Circuitry
Termination
Circuit
Cat. No.
SPST
On-Off
Wire Leads 2 Pos-2 Wire 774031*
■ Normally on switch,
774023, works well in
test/emergency
equipment
Pull Chain
Brass
Plated
SPST
On-Off
Wire Leads 2 Pos-2 Wire 774032*
2-Speed
Pull Chain
Brass
Plated
SPST
Off-On-On
Wire Leads 3 Pos-3 Wire 774033*
■ 1/2 in. diameter
mounting hole
3-Speed
Pull Chain
Brass
Plated
SPST Off-On-On-On Wire Leads 4 Pos-4 Wire 774034*
3-Speed
Pull Chain
Brass
Plated
SPST
Description
Color
Poles Circuitry Termination
Cat. No.
Maintained Contact Black Plastic
Push-Button Switch
SPST
On-Off
Wire Leads
774021*
Maintained Contact Nickle Plated
Push-Button Switch
SPST
On-Off
Wire Leads
774024**
Maintained Contact Brass Plated
Push-Button Switch
SPST
On-Off
Wire Leads
774025**
Momentary Contact Black Plastic
Push-Button Switch
SPST
(On)-Off
Screw
774022***
Momentary Contact
Push-Button Switch
SPST
On-(Off)
Screw
774023****
Red Plastic
Off-On(A)On(B)-On
(A+B)
*3 Amp/250V AC, 6 Amp/125V AC
Rotary, Cord and Door Switches
■ Rotary switches are the
perfect switch for
household appliances,
ceiling fixtures and
lamps
■ Place your lighting
controls in a convenient
location with a lamp
cord toggle switch
*1/3 HP, 125V AC, 4 Amp/250V, 8 Amp/125V, 10 Amp/125V AC
**1 Amp/120VT, 6 Amp/125VL, 6 Amp/125V AC, 3 Amp/250V AC
***3 Amp/250V AC, 6 Amp/125V AC
****1.5 Amp/277V AC, 3 Amp/120V AC
■ Door switches are great
for closets, turning the
light on when the door
is open and off when it
is closed
Rocker Switches
■ Great for household
appliances and other
small machinery
Mounting Hole
Dimensions
Description Color
(in.)
Poles
Description
Appliance
Rocker Switch
Wire Leads 4 Pos-3 Wire 774037*
Cut-Out
Rocker Dimensions (in.) Poles Circuitry Termination
Cat
No.
Rotary
Switch
Brass
Plated
1/2
SPST
Circuitry
Termination Cat. No.
On-Off
Wire Leads 774061*
Standard
.550 x 1.125
SPST
On-Off
Spade
774038*
3-Way Rotary Brass
Switch
Plated
1/2
SPTT
Appliance
Red
Rocker Switch Lighted
Standard
.550 x 1.125
SPST
On-Off
Spade
774039*
Rotary
Switch
Black
Plastic
1/2
SPST
On-Off
Standard
Rocker Switch
.830 x 1.45
SPST
On-Off
Spade
774045**
Cord Toggle
Brown
Switch
N/A
SPST
On-Off
.520 x .776
SPST
On-Off
Spade
774048***
Door Switch
Kit
1.25 x 2.75
x 2.0
SPST
Normally
On-(Off)
Black
Black
Miniature
Red
Rocker Switch Lighted
*8 Amp/250V AC, 16 Amp/125V AC
**10 Amp/277V AC, 20 AMP/125V AC
***1/2 HP 250V AC, 1/3 HP 125V AC, 10 Amp/125V AC - 250V AC
1-800-435-0705 for Customer Service
White
Off-On(A)-On
Wire Leads 774062*
(B)-On (A+B)
Wire Leads 774069*
N/A
774073**
Wire Leads 774026K†
*3 Amp/250V AC, 6 Amp/125V AC
**5 Amp/250V AC, 10 Amp/125V AC
†1/2 HP 125-277V AC 10 Amp/125V AC, 10 Amp/250V AC, 10 Amp/277V AC
www.idealindustries.com
G-3
Toggle Switches
■ Normally off switch,
774022, is the perfect
switch for bell and
buzzer applications
Commutator Maintenance
How to Select Resurfacer Grade
Pocket-Type Resurfacer
Small Motor and Pocket Resurfacers
Grade code letters designate the following grade combinations:
A Medium/Finish
B Coarse/Finish
D Finish/Polish
G Coarse/Medium
H Medium/Polish
■ Convenient two-in-one
utility tool for all-around
shop maintenance
All Other Resurfacers
Resurfacers for commutators and copper-alloy slip rings are made
in five grades:
X Extra coarse—very fast cutting, for “hogging” off excessive copper
C Coarse — fast cutting
M Medium — for general use, high mica, small ridges and burns
F Finish—for use after the three grades above, for periodic application
and for removing small burns and ridges immediately after
their appearance
P Polish—very fine grade (220 aggregate grain) for burnish finish
For all resurfacers, specify grade by adding the appropriate letter as
a suffix to the catalog number. (Example: 80-475M for medium grade.)
How to Select Resurfacer Size
Size is always written length x width x thickness (working face area
x depth of stone). For handle types, the handle is mounted parallel
to the first dimension. Always use a resurfacer with the largest
face possible (length x width). Thickness should be governed by
clearance around commutator or ring.
Commutator Resurfacers
The resurfacer should have a width of approximately 3/4 the length
of the commutator bar and as long as will conveniently go between
the brush riggings. For periodic application, three or four sizes are
generally sufficient. After determining approximate dimensions,
select nearest standard size and type.
Slip Ring Resurfacers
When space permits, use a resurfacer about 1 in. wider than the face
width of the ring. Length should be at least three times greater
than the longest flat spot to bridge over and ensure a true ring.
Small
Motor-Type Resurfacer
■ Designed for use on
small motors and
generators
■ Available in many twograde combinations
Sizes (Inches)
2x1x6
■ For use on small
fractional horsepower
motors
80-137*
*Add grade letter suffix to Cat. No.
Please allow 1-2 weeks for delivery.
Tool-Type Resurfacer
■ For use in IDEAL
precision grinders or
any type of latheturning device
■ Two resurfacers required
for each grinder
Sizes (Inches)
Grades
Cat. No.
3/4 x 3/4 x 3
80-504*
1 x 1-1/2 x 6-1/2
80-454*
1x2x8
80-461*
X, C, M, F, P
1-1/2 x 2-1/2 x 8
80-468*
2x2x8
80-475*
1 x 1-1/2 x 11
80-482*
2 x 2 x 11
80-496*
*Add grade letter suffix to Cat. No.
Please allow 1-2 weeks for delivery.
Sizes (Inches)
Grades
Cat. No.
Sizes (Inches)
3/4 x 1/2 x 3/8
A, B, D, G, H
80-012*
5/8 x 3/8 x 6
www.idealindustries.com
80-112*
■ For use on fans, signal
motors, auto generators,
locomotive headlight
motors and other
fractional horsepower
motors
■ 10 in. handle
G-4
A, B, D, G, H
2x1x8
Cat. No.
Pencil-Type Resurfacer
■ Different grades of
stone on each end
*Add grade letter suffix to Cat. No.
Please allow 1-2 weeks for delivery.
Grades
Grades
Cat. No.
X, C, M, F, P
80-075*
*Add grade letter suffix to Cat. No.
Please allow 1-2 weeks for delivery.
1-800-435-0705 for Customer Service
Supplies
Straight-Handle Resurfacer
Tramway-Handle Resurfacer
■ For use in hard-to-reach
commutators on small
or enclosed motors
■ Handle shaped to ensure secure grip
■ 10-1/2 in. handle permanently
mounted at 45° angle
T
Sizes (Inches)
Grades
L
Cat. No.
Sizes (Inches)
1x1x1
80-155*
2 x 1-1/2 x 2
1x1x2
80-165*
2x2x2
2x1x2
80-184*
3x2x2
3x1x2
80-193*
3x3x2
80-284*
4x3x2
80-293*
C, M, F, P
*Add grade letter suffix to Cat. No.
Please allow 1-2 weeks for delivery.
Grades
Cat. No.
80-255*
80-265*
X, C, M, F, P
80-274*
*Add grade letter suffix to Cat. No.
Please allow 1-2 weeks for delivery.
Adjustable-Handle
Resurfacer
Saw-Handle Resurfacer
■ For use on medium-size motors
and small generators
■ Permanently fastened center knob
■ Extra rod handle adjusts to three
vertical positions
■ 10 in. handle
T
W
T
L
W
Sizes (Inches)
Grades
2 x 1-1/2 x 2
L
Cat. No.
80-205*
2x2x2
80-215*
80-224*
■ For use on large motors, small rotary converters, motorgenerator sets, telephone generators, etc.
3x3x2
80-234*
■ Handle mounted parallel to length
4x3x2
80-243*
3x2x2
X,C,C,M,M,F,F,PP
*Add grade letter suffix to Cat. No.
Please allow 1-2 weeks for delivery.
Railway-Handle Resurfacer
Grades
T
Cat. No.
4x1x3
80-353*
4 x 1-1/2 x 3
80-357*
4x3x2
80-362*
4x4x3
80-366*
5x2x2
■ Short handle shaped to ensure
secure grip
■ 7-1/2 in. handle permanently
mounted in vertical position
Sizes (Inches)
5x2x3
80-371*
X, C,
C, M,
M, F,
F, PP
X,
80-376*
5x3x2
80-380*
5x3x3
80-385*
6x2x3
80-389*
Cat. No.
6x4x3
80-393*
2 x 1-1/2 x 2
80-305*
8x4x3
80-397*
2x2x 2
80-315*
*Add grade letter suffix to Cat. No.
Please allow 1-2 weeks for delivery.
Sizes (Inches)
3x2x2
3x3x2
W
Grades
X,C,C,M,M,F,F,PP
L
80-324*
80-334*
*Add grade letter suffix to Cat. No.
Please allow 1-2 weeks for delivery.
1-800-435-0705 for Customer Service
www.idealindustries.com
G-5
Commutator Maintenance
W
■ 10 in. handle
Commutator Maintenance
Brush Seater and Commutator Cleaner
Commutator Smoothie® Resurfacing Tool
■ Gentle acting abrasive for seating carbon brushes and cleaning
commutators and slip rings
■ Designed to smooth commutators of auto generators, starting
motors and other similar equipment
■ Soft, loosely bound grain produces a scouring effect when held
against commutator
■ 8-1/2 in. plastic handle with a 5/16 in. x 7/8 in. x 11/16 in.
resurfacer on each end
■ Will not remove or scratch copper
■ Features one polish-grade and one finish-grade resurfacer
■ Self-cleaning
■ Bent handle reaches into any motor frame
■ Available in soft(S), medium(M) and hard(H) grades
■ Non-conductive for user safety
Sizes (Inches)
Grades
Cat. No.
1/4 x 1/4 x 4-3/4
M, H
23-001*
1/2 x 1/4 x 4-3/4
M, H
23-002*
3/8 x 3/8 x 4-3/4
M, H
23-003*
1/2 x 3/8 x 4-3/4
S, M, H
23-004*
1/2 x 1/2 x 4-3/4
S, M, H
23-005*
5/8 x 1/2 x 4-3/4
S, M, H
23-006*
3/4 x 1/2 x 4-3/4
S, M, H
23-007*
1-1/8 x 5/8 x 4-3/4
S, M, H
23-008*
1/2 x 1 x 4-3/4
S, M, H
23-027*
1 x 1 x 4-3/4
S
23-035
2 x 1 x 4-3/4
S
23-036
2x2x2
S
23-037
3x2x4
S
23-039
3x2x6
S
23-041
3x2x8
S
23-042
Description
Cat. No.
Commutator Smoothie® Resurfacing Tool
80-033
Please allow 1-2 weeks for delivery.
Slotter and Scraper
■ Cleans slots, smoothes
burrs, removes mica fins
and bevels sharp copper
edges after undercutting
■ Rigid tool-steel bit with V cutting edge at one end
and U cutter at other end
■ 6-1/2 in. long
Description
Cat. No.
Hand Slotter & Scraper
20-006
Replacement blade
L-7704
Please allow 1-2 weeks for delivery.
*Add grade letter suffix to Cat. No.
Please allow 1-2 weeks for delivery.
Powr-Polish™ Flexible Abrasive
Commutator Cement
■ Fine-grain, non-dusting
abrasive held together
by a flexible bond
■ Non-conductor for filling holes in
commutator bars and pitted mica
■ Serves as both
commutator cleaner
and burnisher
■ Resists fire, oils and acids
■ Highly adhesive and non-shrinking
■ Removes dirt and grease—
imparts super-finished surface
Description
Cat. No.
Commutator Cement (1/2 Ib. jar)
54-007
■ Non-conductive and
non-loading
Sizes (Inches)
Cat. No.
3/8 x 1/2 x 5
82-001
3/8 x 3/4 x 5
82-002
5/8 x 1 x 5
82-003
1x2x5
82-004
1x4x5
82-005
1/8 x 1 x 5
82-006
Please allow 1-2 weeks for delivery.
G-6
www.idealindustries.com
1-800-435-0705 for Customer Service
Supplies
Pee-Wee Precision Grinder
Midget Precision Grinder
Flexible Handle
Flexible Extension
Commutator Maintenance
4-1/4 in.
2-9/16 in.
3 in.
16-1/2 in.
6 in.
13/16 in.
■ Right-angle rack and pinion allows for operation in small areas
■ 6 in. base — recommended for commutator widths up to 9-1/4 in.
(includes extra 1 in. travel obtained by setting resurfacers at
slight angle)
1-13/16 in.
2-3/8 in.
■ Compact size for operation in tight areas
■ Includes convenient carrying case
■ Two tool-type resurfacers required — 80-454 recommended
Description
Cat. No.
Midget Precision Grinder
24-033
Order tool-type resurfacers and brush arm supports separately.
Please allow up to 10 weeks for delivery.
■ 2-3/8 in. base — designed for use on commutators up to
3-3/4 in wide (includes extra 1 in. travel obtained by setting
resurfacers at slight angle)
■ Mounts directly onto brush arm or other support
■ No major motor or generator dismantling necessary
■ Includes 6-3/4 in. flexible handle and carrying case
■ 6 in. flexible handle extension for right-angle operation on
end-opening machines sold separately
Direct-Drive Mica Undercutter
■ Two tool-type resurfacers required — 80-504 recommended
■ Compact tool for shop or job site —
16-1/2 in. long and 8-1/4 lbs.
Description
Cat. No.
Pee-Wee Precision Grinder
24-082
■ Designed for motors or generators
with limited access ports
Replacement Flexible Handle
L-7360
■ 1/5 H.P. Universal motor operates
on 50 and 60 Hz, AC or DC
Flexible Extension
L-7361
Order tool-type resurfacers brush & arm supports separately. Please allow up to 10 weeks for delivery.
■ Blows away mica dust
while undercutting
Brush Arm Supports
■ Three easily interchangeable
heads for different cutting
needs — all feature slot
guides to help guide cutter
for better control and accuracy
1-15/16 in.
1-19/32 in.
Description
Cat. No.
115V, AC/DC main body unit
25-081
230V, AC/DC main body unit
25-082
Small cutter head for 3/4 in. saws (3,500 R.P.M.)
25-083
Standard cutter head for 1 in. saws (2,800 R.P.M.)
25-084
Heavy-duty head for 1-1/4 in. saws (1,850 R.P.M.)
25-085
Order saws and milling cutters separately.
Please allow up to 10 weeks for delivery.
27/32 in.
2-3/8 in.
1-23/32 in.
2-3/8 in.
■ For use with Midget, Standard, or Pee-Wee Grinders
Description
Cat. No.
Wedge support for flat brush arms
24-042
Small U for round brush arms of 7/16 in. to
1-1/2 in. diameter – two halves are separable
24-043
Support for round brush arm of 5/8 in. to 3/4 in. diameter
24-044
Support for 5/8 in. square brush arm
24-052
Please allow up to 10 weeks for delivery.
1-800-435-0705 for Customer Service
www.idealindustries.com
G-7
U-Slot Commutator Saws
■ Hollow ground to provide good clearance
■ Spindle speeds up to 12,000 R.P.M.
■ Tungsten-carbide saws provide exceptionally long service
■ High-speed steel construction provides economical alternative
Commutator Maintenance
■ Designed for commutator mica only — not recommended for
slitting copper or other metals
Thickness (Inches)
Size
O.D. in. x I.D. in.
.015
Cat. No.
.018
Cat. No.
.020
Cat. No.
.023
Cat. No.
.025
Cat. No.
.028
Cat. No.
.030
Cat. No.
.032
Cat. No.
.035
Cat. No.
.038
Cat. No.
.040
Cat. No.
.043
Cat. No.
.045
Cat. No.
26-615
26-628
—
26-732
26-616
26-629
26-720
26-733
—
26-630
26-721
26-734
—
26-631
26-722
26-735
—
26-632
26-723
26-736
—
—
26-724
26-737
—
—
26-725
26-738
—
—
26-726
26-739
—
—
—
26-740
—
—
—
26-741
—
—
—
26-742
—
—
—
26-743
26-152
26-172
26-202
26-452
26-432
26-502
26-582
26-153
26-173
26-203
26-453
26-433
26-503
26-583
26-154
26-174
26-204
26-454
26-434
26-504
26-584
26-155
26-175
26-205
26-455
26-435
26-505
26-585
26-156
26-176
26-206
26-456
26-436
26-506
26-586
26-157
26-177
26-207
26-457
26-437
26-507
26-587
26-158
26-178
26-208
26-458
26-438
26-508
26-588
—
26-179
26-209
26-459
26-439
26-509
26-589
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
—
Tungsten-Carbide Saws
1/4 x 1/8
5/16 x 1/8
3/4 x 5/16
7/8 x 5/16
26-614
26-627
—
26-731
High-Speed Steel Saws
5/16 x 1/8
3/8 x 1/8
1/2 x 3/16
23/32 x 5/16
3/4 x 5/16
7/8 x 5/16
1 x 5/16
26-151
26-171
26-201
26-451
26-431
26-501
26-581
Please allow 4-6 weeks for delivery.
Flange-Type Plastic Anchors
Flange-Type Plastic Anchor Kits
■ Multi-purpose use in hollow or solid materials
■ Excellent for hollow walls — will not fall through
■ Kits include flange-type anchors, slotted/Phillips head screws
and masonry bit
■ Maximum expansion at inner end
■ Convenient plastic storage container
■ Effective, anti-turning ribs
Contents
Cat. No.
■ For use with sheet-metal or wood screws
100 # 6-8-10 x 7/8 in. Flange-type anchors,
100 # 8 x 1 in. combo-head, sheet-metal screws &
1-3/16 in. masonry bit (carbide-tipped)
90-051
100 # 10-12 x 1 in. Flange-type anchors,
100 # 10 x 1-1/4 in. combo-head, sheet-metal screws &
1-1/4 in. masonry bit (carbide-tipped)
90-052
100 # 10-12 x 1 in. Flange-type anchors,
100 # 12 x 1 in. combo-head, sheet-metal screws &
1-1/4 in. masonry bit (carbide-tipped)
90-053
40 # 14-16 x 1-1/2 in. Flange-type anchors,
40 # 14 x 1-1/2 in. combo-head, sheet-metal screws
1-5/16 in. masonry bit (carbide-tipped)
90-054
100 # 10-12 x 1 in. Flange-type anchors,
100 # 10 x 1 in. combo-head, sheet-metal screws &
1-1/4 in. masonry bit (carbide-tipped)
90-055
200 # 6-8-10 x 7/8 in. Flange-type anchors,
100 # 10-12 x 1 in. flange-type anchors,
1-3/16 in. masonry bit (carbide-tipped) &
1-1/4 in. masonry bit (carbide-tipped)
90-056
■ High-impact Tenite™ plastic construction resists moisture,
corrosion and deterioration (–50°F to 220°F)
■ Color-coded for easy identification
Description
Screw
Size
Drill
Size (In.)
Yellow – 7/8 in. long
6-8-10
Red – 1 in. long
10-12
White – 1-1/2 in. long
14-16
G-8
www.idealindustries.com
Quantity
Cat. No.
3/16
100
90-041
1/4
100
90-042
5/16
50
90-044
1-800-435-0705 for Customer Service